Application of ultrasound-assisted acid leaching procedures for major and trace elements determination in edible seaweed by inductively coupled plasma-optical emission spectrometry

A new method using diluted reagents (nitric and hydrochloric acids and oxygen peroxide) and ultrasound energy to assist metals acid leaching with from edible seaweed was optimized. The method uses a first sonication at high temperature with hydrochloric acid as a previous stage to an ultrasound-assisted acid leaching with 7 ml of an acid solution containing nitric acid, hydrochloric acid and hydrogen peroxide at concentrations of 3.7, 3.0 and 3.0 M, respectively. Optimum conditions for the first sonication step were ultrasound energy at 17 kHz, sonication temperature at 65 °C, an acid volume of 2 ml, an hydrochloric acid concentration of 6.0 M and a sonication time of 10 min. It has been found that the first sonication stage at high temperature with hydrochloric acid is necessary to obtain quantitative recoveries for As, Ba, Fe and V. Otherwise quantitative recoveries were reached for the other elements investigated (Ca, K, Na, Mg, Cd, Cr, Cu, Mn, Ni, Pb and Zn). The repeatability of the ultrasound-assisted acid leaching method was around 10% for all elements. Adequate limit of detection and limit of quantification were reached by using inductively coupled plasma-optical emission spectrometry (ICP-OES) for measurements. The method resulted accurate after analysing several seaweed certified reference materials (IAEA-140/TM, NIES-03 and NIES-09). The method was finally applied to the multi-element determination in edible seaweed samples.     

Potential energy surface for the CCl4 + H --> CCl3 + ClH reaction: kinetics and dynamics study

An analytical potential energy surface for the gas-phase CCl4 + H --> CCl3 + ClH reaction was constructed with suitable functional forms to represent vibrational modes. This surface is completely symmetric with respect to the permutation of the four chlorine atoms and is calibrated with respect to experimental thermal rate constants available over the temperature range 297-904 K. On this surface, the thermal rate constants were calculated using variational transition-state theory with semiclassical transmission coefficients over a wider temperature range 300-2500 K, therefore obtaining kinetics information at higher temperatures than are experimentally available. This surface was also used to analyze dynamical features, such as tunneling and reaction-path curvature. In the first case, the influence of the tunneling factor is very small since a heavy chlorine atom has to pass through the barrier. In the second, it was found that vibrational excitation of the Cl-H stretching mode can be expected in the exit channel.     

Chemoselective hydrogenation catalysts: Pt on mesostructured CeO2 nanoparticles embedded within ultrathin layers of SiO2 binder

Pt on mesostructured CeO(2) nanoparticles embedded within ultrathin layers of highly structured SiO(2) binder shows highest activity reported with 80% selectivity for the chemoselective hydrogenation of crotonaldehyde. Characterization by transmission electron microscopy (TEM), CO adsorption, and X-ray photoelectron spectroscopy (XPS) show the presence of small Pt metal particles, preferentially located on CeO(2) (70%) together with the formation of Pt-CeO(2-x) sites at the interface between Pt and CeO(2) (4 nm) nanoparticles. These sites are able to polarize the carbonyl group and facilitate the selective hydrogenation of this with respect to the double bond.     

Solid-phase spectrophotometric microdetermination of iron with ascorbic acid and ferrozine

 A very sensitive and selective method for the determination of trace amounts of iron has been developed, based on the reduction of Fe(III) to Fe(II) by ascorbic acid, followed by chromogenic chelation of Fe(II) with ferrozine. The complex Fe(II)-ferrozine is easily sorbed on a dextran-type anion-exchange gel packed in a 1 mm cell, and the absorbance of the gel is measured directly at 569 and 800 nm. The extended linear range of the determination is 0.5–10 ng ml^-1 of iron (apparent molar absorptivity=4.4×10⁷ l mol^-1 cm^-1) and the precision (RSD) 1.3% for a concentration of 5 ng ml^-1 of iron (n=10). The detection limit for a sample volume of 1000 ml, using 0.040 g of anion-exchanger, corresponds to 0.12 ng ml^-1. The method has been successfully applied to the determination of iron in natural and waste waters, wine, soil extract and previously digested vegetal tissues, drugs and human hair. Received: 20 November 1995/Revised: 23 January 1996/Accepted: 26 January 1996     

The thermorheological complexity of photoelastic behaviour of 2-hydroxyethyl methacrylate — dodecyl methacrylate copolymers

The viscoelastic photoelastic behaviour of networks of 2-hydroxyethyl methacrylate — dodecyl methacrylate (DMA) copolymers in the main transition and rubberlike region was investigated. With increasing DMA content, photoelastic functions are quickly shifted to lower temperatures or shorter times; a detailed course of the functions suggests heterogeneity of the copolymers. Due to the existence of long side chains, optical function of all samples change the sign from positive to negative with increasing temperature. While the temperature dependences of the moduli of copolymers can be described by the two-phase Takayanagi model, the temperature dependences of optical functions cannot be described by using this model. It has been found, however, that the tempeature and time dependences of photoelastic functions can be described semiquantitatively by a three-phase model with a hypothetical statistical copolymer as the third component. The high values of the volume fraction of the hypothetical statistical copolymer found for the individual samples, suggest a considerable miscibility and a strong influence of the interphase boundary on the photoelastic behaviour of the copolymers.     

Photooxygenation of 9-methyl-1,2,3,4-tetrahydrocarbazole: A kinetic study

The reaction of the singlet oxygen with 9-methyl-1,2,3,4-tetrahydrocarbazole has been undertaken to give a benzazonine derivative in good yield. Rose-bengal supported on an anionic resin was used as heterogeneous photosensitizing agent. Kinetic evaluation has been made for the additon of singlet oxygen to the indole ring at room temperature.

---

9--1,2,3,4- . , , . .

     

Use of photochemical reactions in flow injection: determination of oxalate in urine

The use of photochemical reactions in flow injection (FI) is reported. The irradiation of an FI reactor with a suitable source facilitates the development of the iron(III)-oxalate reaction, allowing the amperometric determination of the anion in the range 1.0-13.0 micrograms ml-1, with a relative standard deviation of 1.1% and a sampling frequency of 40 h-1. The proposed method was applied successfully to the determination of oxalate in urine samples.     

New synthetic “tricks”. Triphenylphosphine-mediated amide formation from carboxylic acids and azides

Equimolar amounts of carboxylic acids, aryl or alkyl azides, and Ph₃P in refluxing benzene (hexane, toluene) afford amides in good yields. Insolubility of zwitterions Ph₃P⁺-NH(CH₂)_nCOO-, arising from μ-azido acids and Ph₃P, limits the utilization of the method for lactame formation.     

Zwitterionic ion chromatography with carboxybetaine surfactant-coated particle packed and monolithic type columns

Both particle packed (25 cm x 0.46 cm I.D. SUPELCOSIL 5 microm C18) and monolithic type (10 cm x 0.46 cm I.D. Merck Chromolith Performance C18) reversed-phase substrates were dynamically coated with a carboxybetaine type zwitterionic surfactant ((dodecyldimethyl-amino) acetic acid) and investigated as stationary phases for use in zwitterionic ion chromatography (ZIC). Investigations into eluent concentration and pH were carried out using KCl eluents containing 0.2 mM of the carboxybetaine surfactant to stabilise the column coatings. It was found that eluent concentration decreased anion retention whilst simultaneously increasing peak efficiencies, which may be due to the dissociation of intra- and inter-molecular salts of the carboxybetaine surfactant under higher ionic strength conditions. The Effect of eluent pH was an increase in anion retention with decreased eluent pH due to the increased protonation of the weak acid terminal group of the carboxybetaine, causing both a relative increase in the positive charge of the stationary phase and less repulsion of the anions by the dissociated weak acid group. The carboxybetaine-coated monolithic phase was applied to rapid anion separations using elevated flow rates and flow rate gradients.     

The structure of a trimolecular liquid: tert-butyl alcohol:cyclohexene:water

The structure of the trimolecular liquid mixture of 2:6:1 cyclohexene, tert-butyl alcohol, and water has been investigated using hydrogen/deuterium substitution neutron scattering techniques, and a three-dimensional structural model refined to be consistent with the experimental data has been built using the technique of Empirical Potential Structure Refinement. The model shows a well-mixed solution of the three molecular components where the competing interactions between the nonpolar cyclohexene and polar water molecules are balanced in the solution leading to largely pure-alcohol-like interactions between the tert-butyl alcohol molecules. Cyclohexene molecules favor direct solvation by alcohol methyl groups while water molecules are accommodated, dispersed throughout the solution, via hydrogen bonding interactions with the alcohol molecule hydroxyl groups. Rare occurrences of direct cyclohexene-water interactions are of the classic hydrophobic hydration type and no evidence is found for microscopic heterogeneity in the trimolecular mixture in contrast to the general findings for binary alcohol-water solutions.