Nanostructure of polysaccharide complexes

The interaction of gum arabic (GA) with chitosan (Ch) of different degree of deacetylation was studied by turbidity measurements, dynamic light scattering and atomic force microscopy. The structure of the complexes was found to be directly related to the charge density of chitosan molecules. Gum arabic and chitosan with a degree of deacetylation of 75% form soluble complexes with a loosely globular structure of about 250 nm, at weight ratios up to 1.2, if the concentrations are kept low (total biopolymer concentration up to 0.06%). If chitosan has a higher charge density (degree of deacetylation of 93%), colloidal particles are formed, independently of the polymer concentration or ratio. At low concentrations and GA/Ch ratios of 1 or 1.2, the particles have diameters of 200-250 nm. The formation of soluble complexes is attributed to a chitosan lower charge density and the presence of non-charged monomers, which prevent the efficient self-assembly of the macromolecules.     

Casbane diterpene as a promising natural antimicrobial agent against biofilm-associated infections

Croton nepetaefolius is a native plant from northeastern Brazil that belongs to the Euphorbiaceae family. The biological action of this plant has been extensively explored, being the secondary metabolites responsible for its properties alkaloids, diterpenes, and triterpenes. This study aimed to evaluate the ability of casbane diterpene (CD), isolated from the ethanolic extract of C. nepetaefolius, to inhibit microbial growth and biofilm formation of several clinical relevant species (bacteria and yeasts). It was found that CD possessed biocidal and biostatic activity against the majority of the species screened, with minimal active concentrations ranging between 125 and 500 μg/mL. In addition, it was observed that biofilm formation was inhibited even when the planktonic growth was not significantly affected. In conclusion, CD showed potential to be a natural tool for the treatment of diseases caused by different infectious microorganisms.     

Cellulose-based liquid crystalline photoresponsive films with tunable surface wettability

We report on a new type of liquid crystalline cellulosic films with light controllable reversible wettability. The films are prepared from a thermotropic cellulose derivative functionalized with azo-containing groups. These groups exhibit dynamic changes in interfacial properties in response to UV irradiation. The UV irradiation induces trans-to-cis isomerization in the azobenzene moiety, which causes a conformational change in the upper molecular layers of the thin films. These changes originate a hydrophobic to comparatively hydrophilic transformation of the surface. The reversible wettability of the surface results from the cis/trans photo and thermal isomerization. The UV-vis absorption spectra, as well as contact angle measurements with UV irradiation, clearly support the understanding of the phenomenon. This type of surface design enables the amplification of molecular level conformational transitions to macroscopic changes in interface properties using the means of isomerism. This opens new opportunities in surface engineering using eco-friendly cellulose manipulation.     

Characterization of poly(vinyl acetate)/sugar cane bagasse lignin blends and their photochemical degradation

The acetone-soluble lignin fraction (ASLF) of sugar cane bagasse, from a sugar and alcohol factory residue, was obtained after extraction with formic acid and used to prepare blends with poly(vinyl acetate) (PVAc) by casting. PVAc and ASLF/PVAc blends were irradiated with ultraviolet light (Hg lamp). Blend formation and the irradiation effects were examined through thermal analysis (TG and DSC), scanning electron microscopy, and atomic force microscopy. The DSC results show PVAc glass transition temperature (T _g) shifts because of both, irradiation and ASLF incorporation. Non-irradiated pure PVAc presented a smooth surface, while after UV irradiation, light surface spots are observed. ASLF/PVAc 10/90 and 5/95 blends did not exhibit differences before and after UV irradiation, suggesting that lignin protects PVAc from photochemical degradation.     

Sol–gel silica hybrid biomaterials for application in biodegradation of toxic compounds

The purpose of the present work is the sol–gel synthesis, structure characterization and potential application of hybrid biomaterials based on silica precursor (MTES) and natural polymers such as gelatin or pectin. The structure formation in the biomaterials was investigated by XRD, FTIR, BET and AFM. The results showed that all studied hybrid biomaterials have an amorphous structure. The FT-IR spectra of the obtained materials with MTES showed chemical bonds at 2,975, 1,255, 880 and 690 cm⁻¹ due to the presence of Si–O–R (CH₃ and C₂H₅) and Si–C bonds. In the samples synthesized with TEOS the inorganic and organic components interact by hydrogen bonding, Van der Waals or electrostatic forces. Surface area of investigated samples decreases with increasing of the natural polymers content. The structure evolution was studied by AFM and roughness analysis. Depending on the chemical composition a different design and size of particles and their aggregates on the surface structure were established. The hybrid biomaterials were used for immobilization of bacterial cells and applied in the biodegradation of the toxic compound 4-chlorobutyronitrile, possible constituent of waste water effluents in a laboratory glass bioreactor. Optimization of the process at different temperatures was carried out.     

Thermal analysis characterization of PAAm-<Emphasis Type="Italic">co</Emphasis>-MC hydrogels

This paper reports the thermal characterization of polyacrylamide-co-methylcellulose hydrogels and the constituent monomers (acrylamide and methylcellulose). Polymeric materials can be used to produce hydrogels, which can be natural, synthetic, or a mixture. The hydrogels described here were obtained by free radical polymerization, in the presence of N,N′-methylene-bis-acrylamide as a cross-linker agent. Four acrylamide concentrations were used for the synthesis of hydrogels: 3.6, 7.2, 14.7, and 21.7% (w/v). The materials so obtained were analyzed by TG, DTG, DSC, and FT-IR. The TG curves of acrylamide and methylcellulose showed three mass loss events. In DSC curves, the acrylamide exhibited one melting peak at 84.5 °C, and methylcellulose indicated one exothermic event. Nevertheless, acrylamide was considered more stable than methylcellulose. The TG curves of the hydrogels exhibited three mass loss events, and on the DSC curves, three endothermic events were observed. It was verified that the different acrylamide proportions influenced the thermic behavior of hydrogels, and that the authors considered the 7.2% hydrogel a promising drug carrier system. The absorption bands were well defined, confirming the presence of the functional groups in the samples.     

Evaluation and application of bismuth as an internal standard for the determination of lead in wines by simultaneous electrothermal atomic absorption spectrometry

A method for the direct determination of Pb in wines by simultaneous multi-element atomic absorption spectrometry (SIMAAS) using a transversely heated graphite atomizer, Zeeman-effect background corrector and internal standardization is proposed. Bismuth was used as an internal standard and Pd(NO3)2 plus Mg(NO3)2 as chemical modifier to stabilize both the analyte and the internal standard. The implementation of two pyrolysis steps avoided any build-up of carbonaceous residues on the graphite platform. All diluted samples (1 + 1 v/v) in 0.2% v/v HNO3 and reference solutions (5.0-50 microg l(-1) Pb in 0.2% v/v HNO3) were spiked with 25 microg l(-1) Bi. For a 20 microl aliquot dispensed into the graphite tube, a good correlation (r = 0.9997) was obtained between the ratio of the analyte signal to the internal standard signal and the analyte concentration of the reference solutions. The electrothermal behaviour of Pb and Bi in red, white and rosé wines were compared. In addition, absorbance variations due to changes in experimental conditions, such as atomizer temperature, integration time, injected sample volume, radiation beam intensity, graphite tube surface, dilution and sample composition, were minimized by using Bi as internal standard. Relative standard deviations of measurements based on integrated absorbance varied from 0.1 to 3.4% and from 0.5 to 7.3% (n = 12) with and without internal standard correction, respectively. Good recoveries (91-104%) for Pb spikes were obtained. The characteristic mass was 45 pg Pb and the limit of detection based on integrated absorbance was 0.9 microg l(-1) Pb. Internal standardization increased the lifetime of the tube by 25%. Direct determinations of Pb in wines with and without internal standardization approaches were in agreement at the 95% confidence level. The repeatability and the tube lifetime were improved when using Bi as internal standard. The improvement in accuracy using an internal standard was only observed when the analytical results were affected by errors.     

Implementation of recycling routes for scanning probe microscopy tips.

In this work, effective, yet simple, recycling mechanisms for used scanning probe microscopy (SPM) tips were implemented. Comprising a tip profile characterization methodology and specific cleaning procedures, which decontaminate SPM tips whether the contamination nature is known or not, such routes were optimized during numerous tests with brand new, previously used, and already discarded categories of SPM tips. The results show that if the used tip suffered contamination only, but no physical damages, during its scanning lifetime, it becomes readily available for reutilization after the cleansing process, characterizing a recycling route. On the other hand, if the tip went through wear and breakages during its utilization, it still can be decontaminated, but may not be directly reutilized due to its inadequate physical profile. Nevertheless, the methodology developed in this work may yet be applied as part of a more complex recycling route.     

The use of dilatometry aiming to evaluate the metallurgical aspect of coil slump in a hot-rolled medium carbon steel

Journal of Thermal Analysis and Calorimetry - The hot coil slump is a recurrent problem in the manufacturing process of medium and high equivalent carbon steel plates. Even with the success of the...