Sustainable self-assembly strategies for emerging nanomaterials

1. Download : Download high-res image (338KB)
2. Download : Download full-size image

     

Hydration mechanisms of supersulfated cement

Considerable attention has been given to special cements, capable of reducing CO₂ emissions, energy and limestone consumption. Supersulfated cements are made of blast furnace slag (GBFS), calcium sulfate (CS), and small quantities of activator, but achieving their optimal proportions is complex. In this paper, the effects of the both CS and alkali activator (KOH) contents were studied. The main results showed that the compressive strength, heat of hydration, and consumption of anhydrite phase were strongly influenced by the alkaline content, while low calcium sulfate or alkaline content increased the formation of CSH. The instability of ettringite was verified: with low CS, the probable hypothesis was its conversion into monosulfate due to the scarcity of sulfate; with high CS, it was associated with intense, rapid consumption of anhydrite with high KOH content, followed by the precipitation of ettringite on the surface of slag grains and its conversion into monosulfate.     

Microwave treatment of biological samples for methylmercury determination by high performance liquid chromatography-cold vapour atomic fluorescence spectrometry

A simple and rapid microwave-assisted alkaline digestion procedure was developed in combination with high performance liquid chromatography-ultraviolet post-column oxidation-cold vapour atomic fluorescence spectrometric detection for methylmercury determination in biological tissues. Since the stability of methylmercury in methanolic potassium hydroxide solution under microwave irradiation was verified, the microwave-assisted extraction procedure was optimized in terms of quantitative recovery of methylmercury and minimum time required. The alkaline extracts were subjected to clean-up steps with dichloromethane and hydrochloric acid in order to reduce matrix interferences in methylmercury determination. The effects of matrix interferences were checked by comparison of the slopes corresponding to calibration and standard addition curves. The accuracy of the method was evaluated by the analysis of two biological certified reference materials, NRC TORT-2 and BCR 463. The results obtained by the proposed method were in good agreement with the certified values of methylmercury concentration in both materials. The detection limit was 10 microg kg(-1) and the relative standard deviation was < 8% for methylmercury concentrations ranging from 0.15 to 3.0 mg kg(-1).     

Reagentless biosensor for isocitrate using one step modified Pt-Ir microelectrode

The Pt-Ir microelectrode modified through one step electropolymerization is proposed for the isocitrate amperometric biosensor construction. The enzyme (isocitrate dehydrogenase-ICDH), coenzyme (NADP(+)) and mediator (Meldola's Blue) were immobilized onto the microelectrode surface in one step from a PIPES buffer solution containing pyrrole. The optimized experimental conditions were 25 cycles of cyclic voltammetric in a solution containing 3.58 10(-5) mol l(-1) of mediator, 3.51 10(-4) mol l(-1) of coenzyme and 2.68 U ml(-1) of enzyme. In contrast to the biosensor for isocitrate reported in literature, just one enzyme was immobilized and no coenzyme addition in the solution of analysis was necessary. Catalytic currents were proportional to the isocitrate concentration between 7.7 10(-6) and 1.04 10(-4) mol l(-1), showing good repeatability. The detection limit of the proposed biosensor was 3.50 10(-6) mol l(-1), the response time was lower than 20 s, the lifetime was about 30 determinations and no significant interference of sugars and citric acid was verified. Orange juice samples were analysed by both methodology biosensor and spectrophotometric commercial kit, and the obtained results presented a good correlation. The data demonstrated that the developed biosensor is suitable for isocitrate determination in orange juice without matrix interferences.     

Mono- and dinuclear five-coordinate cyclometalated palladium(II) compounds

Reaction of cyclometalated halide-bridged Pd(II) complexes 1-4 with the tertiary triphosphine ligand (Ph2PCH2CH2)2PPh (triphos) yielded complexes [((Ph2PCH2CH2)2PPh-P,P,P)Pd(N(Cy)=(H)C)C6H2(C(H)=N(Cy))Pd((Ph2PCH2CH2)2PPh-P,P,P)][ClO4]2 5, [Pd(C6H4-N=NC6H5)((Ph2PCH2CH2)2PPh-P,P,P)][ClO4] 6, and [Pd(R-C6H3C(H)=NCy)((Ph2PCH2CH2)2PPh-P,P,P)][ClO4] (7; R = 4-CHO, 8; 3-CHO). Spectroscopic and analytic data suggest five-coordination on the palladium atom, which, for complexes 5, 6, and 7, was confirmed by X-ray crystallography. The geometry around palladium may be view as a distorted trigonal bipyramid, with the palladium, nitrogen, and terminal phosphorus atoms in the equatorial plane. Compound 5 is the first doubly cyclometalated palladium(II) compound with two pentacoordinated metal centers. The structure of 6 comprises two discrete cations with slightly different geometries, showing the importance of crystal packing forces in order to determine the coordination arrangement.     

Mechanistic studies on the formation of glycosidase-substrate and glycosidase-inhibitor covalent intermediates

Glycoside hydrolases catalyze the breaking of the glycosidic bond. This type of bond fashioned between two monosaccharides is very stable, and the polymers created are involved in multiple cellular processes, being crucial to life. In this article, computational methods were used to study the first step of the mechanism of reaction of retaining glycoside hydrolases in atomic detail. The systems modeled included a simplified reaction center and a small substrate/inhibitor. Using DFT calculations we were able to corroborate and provide molecular-level detail to the dissociative mechanism proposed in the literature. The role of the hydrogen bridge between the nucleophile and the C(2)--OH group of the ring was also investigated. Therefore, we concluded that this bridge is responsible for lowering the activation barrier by 5.1 kcal mol(-1) with functional BB1K/6-311+G(2d,2p), and the absence of the bridge explains, at least in part, the inhibitory effect of fluoro-substituted glycosides in the -2 position. The hydrogen bridge could also be involved in favoring the ring distortion verified in the transition state, and the dissociative character of the reaction mechanism. Using the NBO method, point atomic charges were calculated. In the transition state, the positive charge generated in the sugar ring is distributed nearly equally between the anomeric carbon and the ring oxygen, through a partial double bond involving the two atoms.     

Synthesis of porphyrin indolin-2-one conjugates via palladium-catalyzed amination reactions

New porphyrin indolin-2-one conjugates were synthesized via palladium-catalyzed amination reactions of iodinated and dibrominated indolin-2-one derivatives with (2-amino-5,10,15,20-tetraphenylporphyrinato)nickel(II). The combination of palladium catalysts and the phosphine ligand dicyclohexylphosphino-2′,4′,6′-triisopropylbiphenyl (XPhos) is an effective methodology for catalyzing the coupling of 5-iodo-, 5,7-dibromo- and 4,6-dibromo-1,3,3-trimethylindolin-2-one with 2-aminoporphyrin to give the corresponding mono-(2-aminoporphyrinyl)- and di-(2-aminoporphyrinyl)-substituted indolin-2-ones in satisfactory yields under mild conditions. The mono brominated porphyrinic derivatives also underwent cross-coupling reactions under similar catalytic conditions. The studies also demonstrated that the course of the coupling process depends on factors, such as the catalytic system, number and position of the halogen substituents and the heating condition. Insights into the reactivity trends of the 5-iodo; 4,6- and 5,7-dibrominated indolin-2-one derivatives was carried out using theoretical calculations performed using density-functional theory with the B3LYP functional.     

Effect of melt flow rate of polycarbonate and cobalt catalyst on properties of PET/PC (80/20 wt%) reactive blending

The influence of PC melt flow rate (MFR) on phase behavior, thermal and rheological properties of catalysed and non-catalysed poly(ethylene terephthalate)/polycarbonate (PET/PC) (80/20 wt%) reactive blending were investigated. Two types of PC named PC1 and PC2 with MFR 3.1 and 10.8 g/10 min, respectively, were used. Each PC and the catalyst showed significant influence on calorimetric properties, thermal stability and WAXS patterns of the blends. Regarding to TG/DTG, the blends degraded in two steps which were attributed to PET rich phase and PC one and permit to infer that a partially miscible blends were produced.     

Evaluation and application of bismuth as an internal standard for the determination of lead in wines by simultaneous electrothermal atomic absorption spectrometry

A method for the direct determination of Pb in wines by simultaneous multi-element atomic absorption spectrometry (SIMAAS) using a transversely heated graphite atomizer, Zeeman-effect background corrector and internal standardization is proposed. Bismuth was used as an internal standard and Pd(NO3)2 plus Mg(NO3)2 as chemical modifier to stabilize both the analyte and the internal standard. The implementation of two pyrolysis steps avoided any build-up of carbonaceous residues on the graphite platform. All diluted samples (1 + 1 v/v) in 0.2% v/v HNO3 and reference solutions (5.0-50 microg l(-1) Pb in 0.2% v/v HNO3) were spiked with 25 microg l(-1) Bi. For a 20 microl aliquot dispensed into the graphite tube, a good correlation (r = 0.9997) was obtained between the ratio of the analyte signal to the internal standard signal and the analyte concentration of the reference solutions. The electrothermal behaviour of Pb and Bi in red, white and rosé wines were compared. In addition, absorbance variations due to changes in experimental conditions, such as atomizer temperature, integration time, injected sample volume, radiation beam intensity, graphite tube surface, dilution and sample composition, were minimized by using Bi as internal standard. Relative standard deviations of measurements based on integrated absorbance varied from 0.1 to 3.4% and from 0.5 to 7.3% (n = 12) with and without internal standard correction, respectively. Good recoveries (91-104%) for Pb spikes were obtained. The characteristic mass was 45 pg Pb and the limit of detection based on integrated absorbance was 0.9 microg l(-1) Pb. Internal standardization increased the lifetime of the tube by 25%. Direct determinations of Pb in wines with and without internal standardization approaches were in agreement at the 95% confidence level. The repeatability and the tube lifetime were improved when using Bi as internal standard. The improvement in accuracy using an internal standard was only observed when the analytical results were affected by errors.     

Hydrogen‐bonding controls the solid‐state and enantiomeric comformations of the amino alcohol ligand 2‐[(2‐hydroxyethyl)amino]cyclohexanol

The crystal structure of the title compound, C₈H₁₇NO₂, consists of (R,R) and (S,S) enantiomeric pairs packed in adjacent double layers which are characterized by centrosymmetric hydrogen‐bonded dimers, generated via N—H...O and O—H...O interactions, respectively. Intermolecular interactions, related to acceptor and donor molecule chirality, link the achiral double layers into tubular columns, which consist of a staggered hydrophilic inner core surrounded by a hydrophobic cycloalkyl outer surface and extend in the [011] direction.