Radical copolymerization of citraconic acid with styrene in dioxane solution

Styrene and citraconic acid (CA) were copolymerized in the dioxane solution ranging mole fraction of CA in feed from 0.1 to 0.9 at 70 °C. The terminal and penultimate models were used to fit the copolymer composition equation. Curve fitting, Mayo-Lewis, Joshi-Joshi, Fineman-Ross, Ezrielev-Brokhina-Roskin, Kellen-Tüd?s methods were used to solve the copolymer equation in terminal model. Besides these methods Solver in Excel 97 was used to solve copolymer equation in terminal and penultimate models of copolymerization. Experimental mole fractions of CA and those predicted from both models are agreed within the precision of the method used for the copolymer analysis, so the copolymer composition does not permit a definite choice of the adequate copolymerization model.     

Lipase from a Brazilian StrainPenicillium citrinum Cultured in a Simple and Inexpensive Medium st]Heat-Denaturation, Kinetics, and pH Stability

This work is a study of lipase production by a Brazilian strain ofPenicillium citrinum using an inexpensive and simple medium without organic nitrogen sources and of some important industrial properties, including thermostability in relation to ionic strength. The maximal lipase activity (1585 U/L) was obtained whenPenicillium citrinum was cultured on 0.75% ammonium sulfate complemented with minerals salts instead of yeast extract. Although this activity was about 55% lower than that produced in medium with yeast extract (2850 U/L), the specific activity (7.8 U/mg proteins) was higher than that obtained with the yeast extract (4.9 U/mg proteins). The morphology of fungus changed totally, with yeast extract there are smooth, solid, and spherical pellets whereas on ammonium sulfate there are small “hairy” pellets uniformly suspended in the medium. The effect of ferrous (Fe⁺⁺) ions was carried out using medium MA with and without Fe⁺⁺ ions. Lipase production byPenicillium citrinum in medium MA requires Fe⁺⁺ ions, the absence of which caused a decreased of about 50% in the specific activity (3.5 U/mg proteins). The utilization of commercial, locally available oils as carbon sources, such as soybean oil (236 U/L) and corn oil (74 U/L) resulted in lower activity compared to olive oil, showing that lipase production byPenicillium citrinum is specifically induced by olive oil. Potassium concentration in the medium can effects the production of lipase (1 mM (1585 U/L), 10 mM (1290 U/L), and 30 mM (1238 U/L), 50 mM (195 U/L), and 100 mM (2 U/L). The crude culture filtered was susceptable to thermal deactivation. It was stable at pH 6.0, but was not stable at the optimum pH (8.0-8.5) at 50 mM. At the low ionic concentration (1-25 mM) this lipase was stable at low pH (3.5-4.0). The activation energy was 22.4 ±2.2 Kcal. mol 1.     

Simultaneous determination of N-butylscopolamine and oxazepam in pharmaceutical formulations by first-order digital derivative spectrophotometry

A simple method has been developed for the simultaneous determination of N-butylscopolamine bromide and oxazepam in pharmaceutical formulations using first-order digital derivative spectrophotometry. Acetonitrile was selected as the solvent in which both compounds showed well-defined bands. Both analytes showed good stability in this solvent when solutions of the analytes were exposed to light and temperatures between 20 degrees and 80 degrees C. The simultaneous determination of both drugs was performed by the zero-crossing method at 226.0 and 257.0 nm for N-butylscopolamine and oxazepam, respectively. The linear range of determination was found to be 2.5 x 10(-7) to 8.0 x 10(-5) mol/L for N-butylscopolamine and 7.1 x 10(-8) to 8.0 x 10(-5) mol/L for oxazepam. A very good level of repeatability (relative standard deviation) of 0.2% was observed for N-butylscopolamine and oxazepam. The ingredients commonly found in pharmaceutical formulations do not interfere. The proposed method was applied to the determination of these drugs in pharmaceutical formulations (capsules).     

Synthesis of non-agglomerated Ba<Subscript>0.77</Subscript>Ca<Subscript>0.23</Subscript>TiO<Subscript>3</Subscript> nanopowders by a modified polymeric precursor method

In this work, we have studied the influence of the pH on the synthesis and structural properties of the Ba_0.77Ca_0.23TiO₃ nanopowders synthesized by a modified polymeric precursor method, in order to achieve non-agglomerated powders. Synthesis, morphology, thermal reactions, crystallite and average particle size of the synthesized powders were investigated through thermal analysis (DTA/TG), X-ray diffraction (XRD), field emission scanning electron microscope (FE-SEM) and Infrared spectroscopy. In summary, Ba_0.77Ca_0.23TiO₃ nanopowders were synthesized for the first time at a relative low temperature (500 °C). It was also found that the alkalinity and acidity of the solution presented a great influence on the powder properties. The best results were obtained from solutions with pH = 8.5 and 11 whose nanopowders presented weakly agglomerate, with homogeneous particle size and a narrow size distribution (30–40 nm). This behavior could be explained based on the FT-IR results in which it was possible to see the increased of the chelation in higher pHs.     

Surface modification of surface sol-gel derived titanium oxide films by self-assembled monolayers (SAMs) and non-specific protein adsorption studies

Biological events occurring at the implant-host interface, including protein adsorption are mainly influenced by surface properties of the implant. Titanium alloys, one of the most widely used implants, has shown good biocompatibility primarily through its surface oxide. In this study, a surface sol-gel process based on the surface reaction of metal alkoxides with a hydroxylated surface was used to prepare ultrathin titanium oxide (TiOx) coatings on silicon wafers. The oxide deposited on the surface was then modified by self-assembled monolayers (SAMs) of silanes with different functional groups. Interesting surface morphology trends and protein adhesion properties of the modified titanium oxide surfaces were observed as studied by non-specific protein binding of serum albumin. The surface properties were investigated systematically using water contact angle, ellipsometry, X-ray photoelectron spectroscopy (XPS), and atomic force microscopy (AFM) measurements. Results showed that the surface sol-gel process predominantly formed homogeneous, but rough and porous titanium oxide layers. The protein adsorption was dependent primarily on the silane chemistry, packing of the alkyl chains (extent of van der Waals interaction), morphology (porosity and roughness), and wettability of the sol-gel oxide. Comparison was made with a thermally evaporated TiOx-Ti/Si-wafer substrate (control). This method further extends the functionalization of surface sol-gel derived TiOx layers for possible titanium alloy bioimplant surface modification.     

The aqueous cationic system sodium undecenoate-dodecyltrimethylammonium bromide at low concentration

The aqueous sodium undecenoate (SUD) –dodecyltrimethylammonium bromide (DTAB) catanionic system was studied at low concentration. The system did not precipitate, even at a 1:1 SUD:DTAB proportion, but showed the formation of a coacervate in a range of surfactant mixture compositions. Micelles have a preferential composition of 0.37 mole fraction of SUD. This behavior is attributed to the presence of the double bond at the distal extreme of the SUD molecule, which can form hydrogen bonds with water. Consequently, the –CH=CH₂ group is situated at the interface between the hydrocarbon micelle core and water, reducing the interfacial free energy. Structural computations demonstrate that the mentioned SUD proportion produces complete coverage of the micelle surface by the double bonds.     

Application of the DFT Theory to Study Cobalamin Complexes

The aim of present study is to select the best methodology in the frame of the Density Functional Theory (DFT), which may be employed to study the cobalamin complexes. Our discussion is limited to two approaches, one in which hybrid B3LYP and UB3LYP functionals are used, and the second in which geometry parameters are calculated within LDA-VWN functional, and energies of the investigated systems are computed within RPBE functional. Results of performed calculations show that both methodologies can be successfully applied to study cobalamin derivatives. Probably because of the small ligand binding energies in the studied complexes, the B3LYP and UB3LYP functionals may be used only to predict the pattern of changes in the binding energies. The use of the RPBE functional, originally parameterized to reproduce in a proper way the chemisorption energies of the small molecules on the metallic surfaces, allows to improve their values so as they fit into experimental data. Geometry parameters of the investigated complexes computed within both approaches are in good agreement with the experimental values. Interatomic distances are a little overestimated while calculated within both hybrid functionals, what is in contrast to VWN functional results. The latter, in general, gives shorter distances as observed experimentally.     

Behavior of Humic Acid as a Micellar Phase in Micellar Electrokinetic Chromatography (MEKC)

The possibility of humic acids acting as micellar phase in micellar electrokinetic chromatography was evaluated. We investigated the separation of naphthalene in capillary electrophoresis using various samples of humic acids as micellar phase under different pH conditions, concentrations of humic acid, and temperature. The humic acid samples studied were from different origins including peat, vermicompost and a commercial sample acquired from Aldrich. Methanol was used as a marker for the electroosmotic flow. The results indicate that the formation of micelle depends on the number and nature of the hydrophobic association sites in an aqueous humic acid solution and on the origin and concentration of the humic acid at a defined pH. At lower pH values, the possibility of the humic acid molecule forming pseudomicelles increases due to a combination of neutralized and dissociated charged sites.     

Metabonomics: the use of electrospray mass spectrometry coupled to reversed-phase liquid chromatography shows potential for the screening of rat urine in drug development

The application of liquid chromatography/mass spectrometry (LC/MS) followed by principal components analysis (PCA) has been successfully applied to the screening of rat urine following the administration of three candidate pharmaceuticals. With this methodology it was possible to differentiate the control samples from the dosed samples and to identify the components of the mass spectrum responsible for the separation. These data clearly show that LC/MS is a viable alternative, or complementary, technique to proton NMR for metabonomics applications in drug discovery and development.     

Comparison of liquid chromatography-mass spectrometry interfaces for the analysis of polar metabolites of benz[a]pyrene

 The performance of two liquid chromatography-mass spectrometry (LC/MS) interfacing techniques, thermospray (TSP) and atmospheric pressure chemical ionization (APCI), for the analysis of benzo[a]pyrene (BaP) metabolites (hydroxy, epoxy and quinone derivatives) was compared. Interface and detection parameters such as source temperature, eluent composition or flow rate were optimized using negative ion mode. In TSP, the main ions are mostly [M]^-, [M−H₂O]^- or [M+CH₃COO]^-, whereas APCI gives mainly the [M]^- and [M−H]^- ions. Quantification was carried out by flow injection. Calibration graphs were linear in the range of 10 ng to 1000 ng in TSP and 0.1 ng to 10 ng in APCI. Detection limits were in the range of 1 ng to 20 ng in TSP and 0.002 ng to 0.2 ng in APCI. The presence of BaP-1,6-dione, BaP-3,6-dione, and BaP-6,12-dione was confirmed in environmental samples of air particulate matter. Received: 6 January 1997/Accepted: 18 April 1997