Synthesen und pharmakologische Eigenschaften von 2,2-Dialkyl-5-aryl-3-pyridylpyrrolidinen

Syntheses and Pharmacological Properties of 2,2-Dialkyl-5-aryl-3-pyridylpyrrolidines Reaction of the photochemically generated benzonitrile methylides 2 with vinylpyridines yields 2-aryl-4-pyridyl-1-pyrrolines 3. Depending on reduction methods, the compounds 3 are selectively transformed to the corresponding cis- or the trans-substituted pyrrolidines 10 or 11 , respectively. Furthermore, a non-photochemical synthesis has been developed: the easily available nitro-ketones 8 provide through reductive cyclization the pyrrolines 3 or directly the pyrrolidines 11. Twenty-seven compounds of types 10 and 11 have been evaluated in the writhing, hot plate and kaolin tests; especially the cis-pyrrolidines 10 exhibit a valuable antinociceptive activity. Some of the pyrrolines and pyrrolidines have been separated into their enantiomers, which are easily interconverted.     

Acetate- and thiol-capped monodisperse ruthenium nanoparticles: XPS, XAS, and HRTEM studies

Monodisperse ruthenium nanoparticles were prepared by reduction of RuCl3 in 1,2-propanediol. The mean particle size was controlled by appropriate choice of the reduction temperature and the acetate ion concentration. Colloidal solutions in toluene were obtained by coating the metal particles with dodecanethiol. High-resolution transmission electron microscopy (HRTEM), X-ray photoelectron spectroscopy (XPS), and X-ray absorption spectroscopy (XANES and EXAFS for the Ru K-absorption edge) were performed on particles of two different diameters, 2 and 4 nm, and in different environments, polyol/acetate or thiol. For particles stored in polyol/acetate XPS studies revealed superficial oxidation limited to one monolayer and a surface coating containing mostly acetate ions. Analysis of the EXAFS spectra showed both oxygen and ruthenium atoms around the ruthenium atoms with a Ru-Ru coordination number N smaller than the bulk value, as expected for fine particles. In the case of 2 nm acetate-capped particles N is consistent with particles made up of a metallic core and an oxidized monolayer. For 2 nm thiol-coated particles, a Ru-S bond was evidenced by XPS and XAS. For the 4 nm particles XANES and XPS studies showed that most of the ruthenium atoms are in the zerovalent state. Nevertheless, in both cases, when capped with thiol, the Ru-Ru coordination number inferred from EXAFS is much smaller than for particles of the same size stored in polyol. This is attributed to a structural disorganization of the particles by thiol chemisorption. HRTEM studies confirm the marked dependence of the structural properties of the ruthenium particles on their chemical environment; they show the acetate-coated particles to be single crystals, whereas the thiol-coated particles appear to be polycrystalline.     

Improvement of kinetics,yield, and colloidal stability of biogenic gold nanoparticles using living cells of <Emphasis Type="Italic">Euglena gracilis</Emphasis> microalga

Recent years have witnessed a boom in the biosynthesis of a large variety of nanomaterials using different biological resources among which algae-based entities have been gaining much more attention within the community of material scientists worldwide. In our previously published findings, we explored some factors that governed the biofabrication of gold nanoparticles using living cultures of microalgae, such as the utilized microalgal genera, the phylum they belong to, and the impact of tetrachloroauric acid concentrations on the ability of these strains to perform the biosynthesis of gold nanoparticles once in contact with these cations. As a follow-up, we present in this paper an improvement of the features of bioproduced gold colloids using living cells of Euglena gracilis microalga when this species is grown under either mixotrophic or autotrophic conditions, i.e., exposed to light and grown in an organic carbon-enriched culture medium versus under autotrophic conditions. As an outcome to this alteration, the growth rate of this photosynthetic microorganism is multiplied 7–8 times when grown under mixotrophic conditions compared to autotrophic ones. Therefore, the yield, the kinetics, and the colloidal stability of the biosynthesized gold nanoparticles are dramatically enhanced. Moreover, the shape and the size of the as-produced nano-objects via this biological method are affected. In addition to round-shaped gold nanoparticles, particular shapes, such as triangles and hexagons, appear. These findings add up to the amassed knowledge toward the design of photobioreactors for the scalable and sustainable production of interesting nanomaterials.     

Vibrations and thermodynamics of clusters of polycyclic aromatic hydrocarbon molecules: the role of internal modes

The vibrational spectra of clusters of coronene molecules are theoretically calculated using a mixed quantum/classical scheme, each molecule being described by a tight-binding Hamiltonian, the intermolecular forces being provided by explicit Lennard-Jones and point charge sites. The normal modes of vibrations are shown to exhibit significant variations upon clustering. In particular, for large clusters intra- and intermolecular modes tend to mix and fill the mid-infrared range. We also calculate the heat capacity of the (C24H12)8 cluster as a function of temperature, emphasizing the isomerizations that take place during melting. Quantum delocalization effects, as obtained from the Pitzer-Gwinn semiclassical approximation, are important enough to wash out all signatures of the structural transitions on the caloric curve. On the basis of a simple two-state model we estimate that clusters containing about 300 molecules are required for melting to be detected on the caloric curve.     

Self-consistent field tight-binding model for neutral and (multi-) charged carbon clusters

A semiempirical model for carbon clusters modeling is presented, along with structural and dynamical applications. The model is a tight-binding scheme with additional one- and two-center distance-dependent electrostatic interactions treated self-consistently. This approach, which explicitly accounts for charge relaxation, allows us to treat neutral and (multi-) charged clusters not only at equilibrium but also in dissociative regions. The equilibrium properties, geometries, harmonic spectra, and relative stabilities of the stable isomers of neutral and singly charged clusters in the range n=1-14, for C(20) and C(60), are found to reproduce the results of ab initio calculations. The model is also shown to be successful in describing the stability and fragmentation energies of dictations in the range n=2-10 and allows the determination of their Coulomb barriers, as examplified for the smallest sizes (C(2) (2+),C(3) (2+),C(4) (2+)). We also present time-dependent mean-field and linear response optical spectra for the C(8) and C(60) clusters and discuss their relevance with respect to existing calculations.     

The catalytic reduction of nitrobenzene at the [MoVIO2(O2CC(S)(C6H5)2)2]2− complex intercalated in a Zn(II)–Al(III) layered double hydroxide host: A kinetic model for the molybdenum–pterin binding site in nitrate reductase

The heterogeneous reduction of nitrobenzene by thiophenol catalyzed by the dianionic bis(2‐sulfanyl‐2,2‐diphenylethanoxycarbonyl) dioxomolybdate(VI) complex, [Mo^VIO₂(O₂CC(S)(C₆H₅)₂)₂]²⁻, intercalated into a Zn(II)–Al(III) layered double hydroxide host [Zn_3−xAl_x(OH)₆]^x+, has been investigated under anaerobic conditions. Aniline was found to be the only product formed through a reaction consuming six moles of thiophenol for each mol of aniline produced. The kinetics of the system have been analyzed in detail. In excess of thiophenol, all reactions follow first‐order kinetics (ln([PhNO₂]/[PhNO₂]₀) = −k_appt) with the apparent rate constant k_app being a complex function of both initial nitrobenzene and thiophenol concentrations, as well as linearly dependent on the amount of solid catalyst used. A mechanism for this catalytic reaction consistent with the kinetic experiments as well as the observed properties of the intercalated molybdenum complex has thiophenol inducing the initial coupled proton–electron transfer steps to form an intercalated Mo^IV species, which is oxidized back to the parent Mo^VI complex by nitrobenzene via a two‐electron oxygen atom transfer reaction that yields nitrosobenzene. This mechanism is widespread in enzymatic catalysis and in model chemical reactions. The intermediate nitrosobenzene thus formed is reduced directly by excess thiophenol to aniline. The values of rate coefficients indicate that reduction of nitrobenzene proceeds much faster than proton‐assisted oxidation of thiophenol. This may account for the observation that the presence of protonic amberlite IR‐120(H) increases considerably the rate of the overall reaction catalyzed. Activation parameters in excess of the protonic resin and PhSH were ΔH^≠ = 80 kJ mol⁻¹ and ΔS^≠ = −70 J mol⁻¹ K⁻¹. The large negative activation entropy is consistent with an associative transition state. The present system is characterized by a well‐defined catalytic cycle with multiple‐turnovers reductions of nitrobenzene to aniline without appreciable deactivation. © 2001 John Wiley & Sons, Inc. Int J Chem Kinet 33: 212–224, 2001     

Characterization of Langmuir and Langmuir-Blodgett films of a thiomacrocyclic ionophore by surface pressure and AFM

The new synthesized thiomacrocyclic ionophore 4-phenyl-4-sulfide-11-(1-oxodecyl)-1,7-dithia-11-aza-4-phosphacyclotetradecane has proven to form Langmuir and Langmuir-Blodgett (LB) films. This ionophore shows a large affinity for copper(II) ions. Thus, the influence of the subphase composition on the surface pressure-area isotherms has been studied. The LB films have been observed by AFM and the effect of the subphase composition and the deposition surface pressure on the LB films is discussed. AFM image morphology has been correlated to the ionophore molecular structure. Surface pressure-area isotherms and AFM images show that the presence of copper(II) ions has an important role in the film structure.     

A new PCR-CGE (size and color) method for simultaneous detection of genetically modified maize events

We present a novel multiplex PCR assay for simultaneous detection of multiple transgenic events in maize. Initially, five PCR primers pairs specific to events Bt11, GA21, MON810, and NK603, and Zea mays L. (alcohol dehydrogenase) were included. The event specificity was based on amplification of transgene/plant genome flanking regions, i.e., the same targets as for validated real-time PCR assays. These short and similarly sized amplicons were selected to achieve high and similar amplification efficiency for all targets; however, its unambiguous identification was a technical challenge. We achieved a clear distinction by a novel CGE approach that combined the identification by size and color (CGE-SC). In one single step, all five targets were amplified and specifically labeled with three different fluorescent dyes. The assay was specific and displayed an LOD of 0.1% of each genetically modified organism (GMO). Therefore, it was adequate to fulfill legal thresholds established, e.g., in the European Union. Our CGE-SC based strategy in combination with an adequate labeling design has the potential to simultaneously detect higher numbers of targets. As an example, we present the detection of up to eight targets in a single run. Multiplex PCR-CGE-SC only requires a conventional sequencer device and enables automation and high throughput. In addition, it proved to be transferable to a different laboratory. The number of authorized GMO events is rapidly growing; and the acreage of genetically modified (GM) varieties cultivated and commercialized worldwide is rapidly increasing. In this context, our multiplex PCR-CGE-SC can be suitable for screening GM contents in food.