Dual CD system-modified MEEKC method for the determination of clemastine and its impurities

A dual system of CDs was used for the first time in MEEKC with the aim of determining clemastine and its three main related impurities in both drug substances and tablets. The addition of methyl-β-cyclodextrin and heptakis(2,6-di-O-methyl)-β-cyclodextrin to the microemulsion pseudo-stationary phase was essential to increase the resolving power of the system to obtain a baseline separation among the compounds. The best microemulsion composition was identified by mixture design and the effects of the factors concentrations of CDs and voltage were investigated by a response surface study applying a Central Composite Design. In both cases, Derringer's desirability function made it possible to find the global optimum, which corresponded to the following combination: microemulsion, 89.8% 10 mM borate buffer pH 9.2, 1.5% n-heptane and 8.7% of SDS/n-butanol in 1:2 ratio; 18 mM methyl-β-cyclodextrin, 38 mM heptakis(2,6-di-O-methyl)-β-cyclodextrin, 17 kV. By applying these conditions, the separation was completed in about 5.5 min. The method was validated following International Conference on Harmonisation guidelines and was applied to a real sample of clemastine tablets.     

Identification and determination of mainstream and sidestream smoke components in different brands and types of cigarettes by means of solid-phase microextraction-gas chromatography-mass spectrometry

The qualitative and quantitative determination of components of mainstream and sidestream smoke has been performed by solid-phase microextraction-gas chromatography-mass spectrometry. Several brands and types of cigarettes sold in Italy were considered: normal, mild, light, extra light, some with filter and some without. Extraction of the analytes was performed by means of solid-phase microextraction (SPME) and the optimisation of the extraction procedure was performed by experimental design, taking into consideration type of fiber polymer, exposure temperature and time. Sixty-seven components of mainstream and sidestream smoke were identified. The quantified compounds (by means of deuterium-labelled isotopologues) were benzene, toluene, p-xylene, m-xylene, pyridine, o-xylene, limonene, naphthalene, phenol and nicotine. Finally, a comparison between the chemical profile of smoke from the different cigarettes was made.     

Multivariate optimisation and validation of a capillary electrophoresis method for the analysis of resveratrol in a nutraceutical

A rapid and simple method based on capillary electrophoresis was developed for the quality control of nutraceuticals containing resveratrol. Setting the UV detector at 280nm, the optimisation involved the separation of 11 effervescent tablet components, including the active compounds vitamin C, vitamin B(2), flavanones and hydroxycinnamic acids. Flufenamic acid was employed as internal standard. The effects of background electrolyte concentration, acetonitrile percentage and voltage were investigated by means of response surface methodology, considering as responses the critical resolution values and analysis time. The optimum conditions were found by Derringer desirability function. The background electrolyte consisted of 23mM borate buffer, adjusted to pH 10.0 with 1M sodium hydroxide, containing 7% (v/v) acetonitrile. Temperature and voltage were set at 25 degrees C and 26kV, respectively. Applying these conditions, the analysis time was below 7min. The performances of the method were tested in terms of selectivity, robustness, linearity and range, accuracy and precision and system suitability, following ICH guidelines.     

Conformational properties and homolytic bond cleavage of organic peroxides. I. An empirical approach based upon molecular mechanics and ab initio calculations

The conformational features of a large number of hydroperoxides ROOH and peroxides ROOR′, where R and R′ are alkyl groups of different and increasing size and phenyl rings, including ortho substituted derivatives, were obtained from molecular mechanics calculations by employing a standard package. For the molecules of small molecular size, comparison was carried out with the results of ab initio calculations. Heats of formation were also obtained from molecular mechanics for hydroperoxides and peroxides: The values are, in general, overestimated. For the molecules containing the CF₃ group, the calculated values are subject to large errors and heats of formation were obtained from ab initio total energies in the “atom equivalents” scheme. To estimate the homolytic dissociation energies of the different bonds in the peroxide molecules, heats of formation of R·, ·OR, and ·OOR radicals were employed and several of them had to be calculated. Different approaches were employed—molecular mechanics calculations, ab initio energies within the atom equivalent and isodesmic reaction schemes, and Benson's group additivity rule; values consistent within the different calculation methods were chosen for estimating dissociation energies. The bond dissociation energies indicate different trends in these molecules as a function of the nature of the R and R′ groups and the possible electronic effects operating in these molecules are discussed. © 1993 John Wiley & Sons, Inc.     

Solid-state characterization of glyburide-cyclodextrin co-ground products

Natural crystalline (α-, β-, γ-) and amorphous derivative (hydroxypropyl-β- and methyl-β) cyclodextrins were selected as potential carriers for obtaining, through a co-grinding technique, a stable activated amorphous form of glyburide with improved dissolution properties. Differential scanning calorimetry (DSC) was used to investigate solid-state modifications of the drug induced by co-grinding with the selected carriers in a high energy vibrational micro-mill. X-ray powder diffraction and FTIR spectroscopy were employed as additional techniques to support DSC data. Equimolar drug : cyclodextrin physical mixtures were co-ground for different times (up to 60 min) at constant vibration frequency (24 Hz). A progressive drug amorphization with increasing grinding time was observed in all binary systems, but, interestingly, different degrees of sensitivity to the mechanical-chemical activation were evident. In fact, blends with natural cyclodextrins, despite the initial higher crystallinity than those with the amorphous derivatives, required the same or shorter co-grinding times (60 min) to achieve complete drug amorphization. Stability studies indicated no appreciable drug recrystallization in co-ground products after 4 months storage in sealed containers at 25°C or 1 month at 25°C and 75% RH. No stability differences were detected between products with natural or derivative cyclodextrins. The results accounted for the suitability of cyclodextrin co-grinding technique to obtain and stabilize glyburide in the activated amorphous form. This revised version was published online in July 2006 with corrections to the Cover Date.     

"Green"-enzymatic synthesis of pegylated phenolic macromer and polymer

Environmentally benign synthesis of novel pegylated polyphenolics, by combining the extraordinary selectivities of a lipase and an oxidase to develop polymeric electrolytes for applications in dye sensitised solar cells.     

X-ray Structure and Thermal Properties of a 1:1 Inclusion Complex Between Permethylated β-Cyclodextrin and Psoralen

The phytoalexin psoralen (7H-furo[3,2-g][1]benzopyran-7-one) has been included in heptakis(2,3,6-tri-O-methyl)-β-cyclodextrin (TRIMEB) to yield a solid crystalline complex of formula TRIMEB-psoralen-H₂O. Its X-ray structural elucidation provides an accurate model for cyclodextrin–furocoumarin interaction. Thermal analysis (hot stage microscopy, differential scanning calorimetry, thermogravimetry) indicated complex dehydration in the range 40–100°C followed by melting at 137.1°C. The X-ray analysis showed that the elongated guest molecule induces elliptical distortion in the host molecule, with which it interacts via C-H ?O hydrogen bonding and hydrophobic interactions. The host molecule adopts a very similar conformation to that in the isostructural complex with l-menthol as guest. Water molecules bridge symmetry-related TRIMEB molecules by hydrogen bonding.     

Synthesis of 2-Cycloalkenones (Parts of 1,4-Diacyl-1,3-butadiene Systems) and of a Heterocyclic Analogue by Metal-Catalyzed Decomposition of 2-Diazoacylfurans

Furans with side-chains at C(2) of various lengths terminating in diazomethyl keto groups are shown to undergo Rh₂(OAc)₄-catalyzed furan unravelling with the production of 2-cyclopentenone, 2-cyclohexenone, and 2-cycloheptenone to each of whose olefinic C(β) is attached an acrylaldehyde unit. Interposition of a cyclohexane or a methylaminomethylene moiety between the furan and diazoketo functions leads to the formation of a hydroindenone and pyrrolone, respectively. Replacement of the diazomethylketo terminus by an α-diazoethylketo system or a α-diazo-β-keto-ester function produces 2-substituted 2-cycloalkenones. A furan with a C₄, diazo-methylketo-terminating side-chain at C(3) is described to be transformed into a 4-formylmethylidene-2-cyclohe-xenone.     

1H NMR spectra of the 2-trifluoroacetyl derivatives of benzo[b]furan and benzo[b]thiophene

The ¹H NMR spectra of the 2-trifluoroacetyl derivatives of benzo[b]furan and benzo[b]thiophene were recorded at 200MHz in two solvents, chloroform and acetone. A long-range coupling constant, 5J(HF), between the fluorine nuclei of the trifluoroacetyl group and H-3, of a value higher than 1 Hz, was measured. From the comparison of the ¹H chemical shifts of, and the solvent effects on, the trifluoroacetyl compounds and those of the corresponding 2-acetyl derivatives, and on the basis of an empirical interpretation of the ⁵J(HF) coupling constant, a predominant Z conformation was tentatively assigned to these derivatives.