黄土高原中部秋季干湿的年际和年代际环流异常特征及与海温的多尺度相关性研究

黄土高原地区作为气候敏感区和生态脆弱区地表干 湿状况的年际和年代际变化特征十分明显. 但以往主要是针对夏季进行分析, 而对黄土高原秋季干湿变化规律及大气环流机理的认识非常有限. 本文基于中国589站最近50 a (1961–2010年)月降水和气温月平均资料、NCEP/NCAR提供的再分析资料以及NOAA提供的海表温度(Sea Surface Temperature, SST) 资料, 运用带通/低通滤波、小波分析、EOF/REOF和回归分析等方法, 在对中国秋季干湿时空演化分类的基础上, 通过研究秋季黄土高原中部干湿演变周期、大气环流特征及与海温的多尺度相关关系, 以揭示影响黄土高原中部秋季干湿变化的物理机理, 并确定影响该区域干湿状况的前兆信号. 小波功率谱分析表明, 黄土高原中部秋季干湿指数存在准4 a和准8 a的周期, 1970–1990年准8 a尺度周期振荡尤为明显. 年际(周期≤ 8 a) 尺度上偏湿年的大气环流特征是, 欧亚大陆中高纬呈“双阻型”, 200 hPa西风急流显著北移, 日本海-鄂霍茨克海受反气旋控制, 其底部的偏东水汽输送带将水汽输入研究区. 年代际(周期 > 8 a)尺度上偏湿年的大气环流特征是, 东亚大陆为一致的低值系统; 200 hPa东亚副热带西风急流减弱北移, 研究区主要水汽来源由经孟加拉湾在中南半岛转向的南风水汽输送及中纬度的西风水汽输送组成. 整个序列上, Nino3区SST指数(Nino3I)超前5个月与秋季干湿指数已呈显著的负相关关系, 而孟加拉湾–中国南海SST指数(BayI)则超前3个月与干湿指数呈现显著的负相关关系. 年际尺度上, 秋季Nino3I, BayI均与秋季干湿指数存在显著相关(准4 a, 4–6 a), 而年代际尺度上, 只有BayI与秋季干湿指数存在显著相关性(准10 a). 黄土高原中部秋季干湿的年际和年代际周期的确定、大气环流异常特征的认识及与海温的多尺度相关关系的建立, 不仅揭示了影响该区域干湿变化的物理机理, 也为干旱气候预测提供了重要的前兆信号. 关键词： 黄土高原中部 干湿特征 海表温度 小波分析     

高生长速度条件下的“层片↔棒状”共晶转变机理研究

低速生长条件下, 共晶“层片↔棒状”转变只由两相的体积分数控制. 高速情况下, 这种转变有时亦发生, 其转变机理不清楚. 本文应用竞争生长准则, 结合高速生长条件下层片共晶和棒状共晶生长模型研究了生长速度引起的“层片↔棒状”转变机理. 结果显示: 体积分数在临界值附近很小的范围内, 生长速度和溶质配分系数的增大可引起“棒状→ 层片”共晶转变; 而当体积分数远离临界值时, 转变不发生. 生长速度名义上引起“层片↔棒状”共晶转变实际上是由生长速度变化引起的体积分数的变化导致的. 关键词： “层片↔棒状”共晶转变 竞争生长 生长速度 体积分数     

强流ECR离子源引出系统研究

为了提高强流ECR 离子源的引出束流品质,分别设计了1# 和2# 引出系统,利用束流引出模拟软件PBGUNS 对1# 和2# 引出系统进行了质子束流引出与传输的模拟计算,结合实际测得的发射度数据分析引出系统,发现2# 引出系统比1# 引出系统引出束流品质高。对ECR 离子源引出系统的电势等位线分布等参数引起的球差进行了简单数学推导及MATLAB 绘图,并结合1# 和2# 引出系统束流相图模拟结果证明了球差会使引出束流品质有效发射度增长,通过适当加大电极孔径可改善束流聚焦情况,得到了束流光学聚焦较好的束流引出系统设计。To improve the quality of extracted ion beam from a high current ECR ion source, 1# and 2# extraction systems were designed and tested. The PBGUNS code was used to simulate the 1# and 2# extraction systems of proton ion beam. The emittance measurement results with the two different extraction systems were compared and analyzed with the simulation, the conclusion that more high quality beam extracted from 2# system than 1# system was got. The formula derivation of ECR ion source extraction system spherical aberration and MATLAB drawing was done by the analyzing on the distribution of extraction field equipotentials, effective emittance increasing caused by spherical berration was proved by 1# and 2# extraction systems beam phase space simulation result, beam focusing would be improved if electrode hole size increasing appropriately and a general concept on good optics focusing of ion beam extraction system was proposed finally.     

Ionic conductivity in three crystalline phases of LiBH4 under pressure

The AC electrical conductivity of LiBH₄ was investigated below 2 GPa between 1 Hz and 1.6 MHz. The high-temperature phase has an ionic conductivity of up to 0.01 S cm^?1, while the low-temperature phases have conductivities two orders of magnitude lower. All phases show an Arrhenius behaviour with activation energies E _a between 0.5 and 0.7 eV, in good agreement with earlier data except for phase III, which is found to have the highest activation energy of the phases studied. The high-temperature phase has a minimum in E _a near 1 GPa, close to the triple point, correlated with a sudden change in activation volume. These features may indicate an isostructural phase transition. The conductivities of the ambient temperature phases increase temporarily by an order of magnitude after transitions between these phases, probably due to new diffusion channels via structural defects. The phase diagram agrees well with earlier results.     

Photonic bandgap via nonlinear modulation assisted by spontaneously generated coherence

A four-level double-ladder atomic system with two upper states coupled to the excited state by a standing-wave trigger field is explored to generate photonic bandgap (PBG) structure. With the assistance of spontaneously generated coherence (SGC) from the two decay pathways, we can obtain single or double fully developed PBG when the trigger field is far away from resonance or resonant. While in the absence of SGC, the atomic medium becomes strong absorptive to the probe field, and therefore the resulting PBGs are severely malformed or even cannot be opened up. Numerical results show that the PBG structure is originated from the third-order cross Kerr nonlinear modulation between the probe and trigger fields. This mechanism differs from the recent schemes based on linear modulation.     

PM10 formation during the combustion of N2-char and CO2-char of Chinese coals

The formation of PM₁₀ (particles less than or equal to 10 μm in aerodynamic diameter) during char combustion in both air-firing and oxy-firing was investigated. Three Chinese coals of different ranks (i.e., DT bituminous coal, CF lignite, and YQ anthracite) were devolatilized at 1300 °C in N₂ and CO₂ atmosphere, respectively, in a drop tube furnace (DTF). The resulting N₂-chars and CO₂-chars were burned at 1300 °C in both air-firing (O₂/N₂ = 21/79) and oxy-firing (O₂/CO₂ = 21/79). The effects of char properties and combustion conditions on PM₁₀ formation during char combustion were studied. It was found that the formation modes and particle size distribution of PM₁₀ from char combustion whether in air-firing or in oxy-firing were similar to those from pulverized coal combustion. The significant amounts of PM_0.5 (particles less than or equal to 0.5 μm in aerodynamic diameter) generated from combustion of various chars suggested that the mineral matter left in the chars after coal devolatilization still had great contributions to the formation of ultrafine particles even during the char combustion stage. The concentration of PM₁₀ from char combustion in oxy-firing was generally less than that in air-firing. The properties of the CO₂-chars were different from those of the N₂-chars, which was likely due to gasification reactions coal particles experienced during devolatilization in CO₂ atmosphere. Regardless of the combustion modes, PM₁₀ formation in combustion of N₂-char and CO₂-char from the same coal was found to be significantly dependent on char properties. The difference in the PM₁₀ formation behavior between the N₂-char and CO₂-char was coal-type dependent.     

Control and scheduling in a two-station queueing network: Optimal policies and heuristics

Consider a two-station queueing network with two types of jobs: type 1 jobs visit station 1 only, while type 2 jobs visit both stations in sequence. Each station has a single server. Arrival and service processes are modeled as counting processes with controllable stochastic intensities. The problem is to control the arrival and service processes, and in particular to schedule the server in station 1 among the two job types, in order to minimize a discounted cost function over an infinite time horizon. Using a stochastic intensity control approach, we establish the optimality of a specific stationary policy, and show that its value function satisfies certain properties, which lead to a switching-curve structure. We further classify the problem into six parametric cases. Based on the structural properties of the stationary policy, we establish the optimality of some simple priority rules for three of the six cases, and develop heuristic policies for the other three cases.     

~n中有界域上全纯函数的第Ⅰ型 C-F公式

本文得到Ｃｎ中有界域上全纯函数的一种其积分密度函数含有全纯函数导数的 Ｃａｕｃｈｙ－Ｆａｎｔａｐｐｉ　　公式，称之为第Ⅰ型 Ｃ－Ｆ 公式，利用这个公式，通过适当选择其中的向量函数，可以得到许多区域上全纯函数相应的第Ⅰ型积分表示式．     

Polarimetric-Spectral-Sensitive Compressed Ultrafast Photography Enables Real-Time Intensity Visualization of Time-Varying Polarized Ultrafast Laser Pulses

Ultrafast laser pulses with complex spatiotemporal and polarization couplings have shown great application prospects in coherent control, particle acceleration, molecular dynamics excitation, and chiral or anisotropic detection. It is very important to observe the polarization-coupled ultrafast laser pulses for characterizing the performance of laser source and understanding the laser-matter interaction, but there is currently no detection technique that can completely characterize them, including the spatio-, spectral-, and polarimetric-temporal information. In this work, a polarimetric-spectral-sensitive has been compressed ultrafast photography (PS-CUP) to realize the real-time intensity visualization of time-varying polarized (TP) ultrafast laser pulses. PS-CUP can not only distinguish the polarization state of a TP pulse, but also realize the spatio-, spectral- and polarimetric-temporal measurement. To demonstrate the ability of polarization resolving detection, PS-CUP is used to successfully distinguish between the sinistral and dextral TP pulses and measure the angle and degree of linear polarization of a dextral TP pulse, respectively, and the experimental results are highly consistent with theoretical simulations. Owing to the unprecedented multidimensional detection ability, PS-CUP is prospected to provide a powerful tool for the diagnosis of various complex ultrafast laser pulses and the detection of ultrafast chiral optics.     

Enhanced Terahertz Phonon Polariton in Lithium Niobate Chip

Terahertz (THz) phonon polaritons, fundamental quasi-particles that couple lattice vibrations with electromagnetic fields at THz frequencies, are found in a variety of materials that offer the potential for a wide range of THz optoelectronic devices and on-chip integrated systems. However, these compact devices and on-chip systems are hampered by the absence of on-chip powerful THz phonon polariton sources. In this study, the efficient generation and amplification of THz phonon polaritons are proposed and directly visualized on a lithium niobate (LN) chip via a tilted pulsefront phase matching technique. By combining lateral pumping and phase matching schemes, two orders of magnitude are successfully attained in the interaction distance between the pump light and the LN chip, accompanied by a substantial amplification of generated THz phonon polariton. The results of this study may lead to abundant potential applications in chip scale THz photonic devices and systems based on LN materials and its integrated heterostructures.