Microwave-Assisted Synthesis of Propesticides 1,3,4-Thiadiazole Aminophosphonates

A novel and easy synthetic route to diethyl (5-substituted phenyl-1,3,4-thiadiazol-2-ylamino) (substituted phenyl) methylphosphonates has been achieved by the reaction of substituted benzylidene-5-(substituted phenyl)-1,3,4-thiadiazol-2-amines and diethyl phosphite under microwave irradiation. These 1,3,4-thiadiazole aminophosphonates were identified by infrared, ¹H NMR, and elemental analyses. The target compounds were obtained in better yields (71–89%) and shorter time (10 min) than with conventional heating.

One-Pot Synthesis of Cefpirome Sulfate from GCLE

Abstract

Cefpirome was synthesized in 37.7% overall yield from 3-chloromethyl-7-phenylacetylamino cephalosporanic acid p-methoxybenzyl ester (GCLE) by sequential substitution of C-3 chloride with iodide and 2,3-cyclopentenopyridine, followed by a one-pot procedure including deprotection of carboxyl group, hydrolysis of 7-phenylacetamido, and reaction with 2-mercaptobenzothiazolyl-(Z)-2-(2-aminothiazol-4-yl)-2-methoxyiminoacetate (MAEM). The reaction conditions were as follows: obtained from GCLE at low temperature (?5 to 0 °C) and absence of light, 3-iodomethyl-7-phenylacetylamino cephalosporanic acid p-methoxybenzyl ester (GILE) without purification was reacted directly with 2,3-cyclopentenopyridine, in which the molar ratio of GCLE, NaI, and 2,3-cyclopentenopyridine was 1:2:4, and the molar ratio of the resulting compound p-methoxybenzyl 7-phenylacetylamido-3-(2,3-cyclopenteno-1-pyridinio)methyl-3-cephem-4-carboxylate iodide and MAEM was 1:1.1. The structure of the intermediate and the target compound obtained were determined by nuclear magnetic resonance spectra and mass spectroscopy.     

Dinuclear Macrocyclic Quinoline Bridged Mercury and Silver Bis(N‐heterocyclic Carbene) Complexes: Synthesis,Structure, and Spectroscopic Studies

Quinoline bridged imidazolium precursors 5,8‐bis(N‐R‐imidazolylidenylmethylene)quinoline PF₆^– salts [H₂L](PF₆)₂ [R = Me ( 1a ), R = naphthylmethyl ( 1b )] were prepared by quaternization of N‐methylimidazole and N‐naphthylmethylimidazole with 5,8‐bis(bromomethyl)quinoline, respectively. Reaction of the imidazolium ligands 1a and 1b with Hg(OAc)₂ and Ag₂O in acetonitrile gave the macrocyclic transition metal carbene complexes [Hg₂L₂](PF₆)₄ ( 2a and 2b ) and [Ag₂L₂](PF₆)₂ ( 3a and 3b ), respectively. All the N‐heterocyclic carbene complexes were characterized in detail by NMR, ESI‐MS, and elemental analysis. Structures of complexes 2a and 3a were determined by X‐ray diffraction studies. Structural studies revealed that the coordination arrangement of the central mercury atom in complex 2a displays a tricoordinate mode and the molecular conformation results in a“closed” form with the bridging quinoline functionality in the macrocycle, whereas the silver complex 3a does not show an coordiantion between the bridging quinoline and the Ag^I ion, which results in an “open” conformation of the macrocycle. The Hg^II and Ag^I NHC complexes showed similar UV absorption and luminescence in acetonitrile solutions.     

Preparation and Characterization of Polymer‐Protected Pt@Pt/Au Core‐Shell Nanoparticles

Poly(N‐vinyl‐2‐pyrolidone) protected Pt‐core bimetallic Pt/Au‐shell (Pt@Pt/Au) nanoparticles were prepared by multi‐step reduction of HAuCl₄ and H₂PtCl₆ alternately by hydrogen adsorbed on platinum atom. Transmission electronic microscopy (TEM) and x‐ray diffraction (XRD) were used to characterize Pt@Pt/Au nanoparticles. The structure of the shell of the nanoparticles seems to be the Au‐Pt solid solution.     

The optimal cell gap determination of a liquid crystal wavefront corrector from a single photoelectric measurement

It has been a crucial technique to improve the dynamic response characteristics of a liquid crystal wavefront corrector (LCWFC) with optimal cell gap since the LCWFC needs at least 2π (or π) phase modulation in adaptive optics systems (AOSs). We have given a complete process for obtaining the optimal cell gap accurately from a single photoelectric measurement, which can be conducted with a liquid crystal (LC) cell of any known thickness. This method has been analysed theoretically and confirmed experimentally by using a wedge-shaped cell; the experimental results match very well with the theoretical analysis. The response time of an optimal gap cell can be a novel evaluation method of response performance of LC materials.     

A new intraparticle mass transfer rate model for cyclic adsorption and desorption in a slab, cylinder or sphere

A new intraparticle mass transfer rate model for cyclic adsorption and desorption in a slab, cylinder or sphere is proposed on the basis of the asymptotic behaviors of the adsorption rate for short and long cycle periods. Through comparison with the exact solution and the linear driving force (LDF) model, the new model is shown to provide a very good approximation for the instantaneous amount adsorbed as well as the adsorption rate for dimensionless half-cycle period τ _c =0.001～1 and is much better than the LDF model.     

Highly Stereoselective Conjugate Addition and α‐Alkynylation Reaction with Electron‐Deficient Alkynes Catalyzed by Chiral Scandium(III) Complexes

The highly Z‐selective asymmetric conjugate addition of 3‐substituted oxindoles to alkynyl carbonyl compounds has been developed by using scandium complexes of chiral N,N′‐dioxides under mild conditions. The thermodynamically unstable Z‐olefin derivatives were obtained in excellent yields and high enantiomeric and geometric control. The catalyst was also found to be effective in the asymmetric acetylenic substitution reaction of 3‐substituted oxindoles, giving excellent enantioselectivities.     

Purity assessment for avoparcin

Well-characterized pure-substance reference materials for the use as calibrants are essential to establish the metrological traceability of the results of chemical measurements. Normally, the characterization of this type of reference material is conducted through a thorough purity assessment of the compound concerned. For this reason, studies on purity assessment, especially for neat organic compounds, continues as an important part of work being undertaken by metrological institutions around the world. Among others, the need for certified pure reference standards continues to increase for residues analysis in foods, particularly for those compounds which have been banned for food safety reasons, but their residues in foods are still monitored under food surveillance program in many countries. In this respect, avoparcin serves as a very good example where testing laboratories have difficulties in obtaining traceable and comparable results on determination of avoparcin in food matrix samples due, in part, to the unavailability of certified pure-substance reference material as calibrant. In this study, it was attempted to assess the purity of a commercially available test material of avoparcin using the mass balance approach. The objective of this paper is to share the difficulties encountered during the course of purity assessment and how they were addressed. As expected, the most challenging part of work was to identify and estimate the amount of unknown impurities, both organic and inorganic-related ones, given the chemical structure and properties of avoparcin. For instance, avoparcin exists in two forms in the test material, i.e., α- and β-avoparcin, and they were found to be susceptible to hydrolysis under certain conditions.     

预阳极化碳糊电极同时测定对乙酰氨基酚和多巴胺

采用循环伏安法制备了预阳极化碳糊电极,研究了对乙酰氨基酚和多巴胺在该修饰电极上的电化学行为。结果表明,预阳极化碳糊电极对对乙酰氨基酚和多巴胺的电化学行为具有良好的电催化作用。对乙酰氨基酚和多巴胺的氧化峰电流与其浓度在2.0×10-6～5.0×10-4mol/L的范围内呈良好的线性关系,检出限分别为6.3×10-7mol/L,2.5×10-7mol/L。方法已用于药物样品中对乙酰氨基酚和多巴胺的测定。     

Eu（TTA）3AA-NBR/PVP同轴超细纤维的制备及荧光性能研究

用同轴静电纺丝制备了含有稀土铕配合物(Eu(TTA)3AA)的芯-壳结构的丁腈橡胶/聚乙烯吡咯烷酮(NBR/PVP)超细荧光纤维。考察了在外层PVP纺丝参数不变的情况下,改变芯层丁腈橡胶纺丝液的纺丝速度、Eu(TTA)3AA含量等对纤维形貌的影响。通过研究Eu(TTA)3AA-NBR/PVP同轴超细纤维中Eu(TTA)3AA微观结构、含量与纤维的荧光性能之间的关系,发现在同轴纤维形成过程中由于溶剂的快速挥发可使Eu(TTA)3AA形成无定形结构,进而在纤维中形成分子簇级别的分散,在Eu(TTA)3AA含量为30%时,同轴纤维比Eu(TTA)3AA粉末的荧光强度提高了2倍。