Atomic-Scale Insight into Exsolution of CoFe Alloy Nanoparticles in La0.4Sr0.6Co0.2Fe0.7Mo0.1O3−δ with Efficient CO2 Electrolysis

In situ exsolution of metal nanoparticles in perovskite under reducing atmosphere is employed to generate a highly active metal–oxide interface for CO₂ electrolysis in a solid oxide electrolysis cell. Atomic-scale insight is provided into the exsolution of CoFe alloy nanoparticles in La_0.4Sr_0.6Co_0.2Fe_0.7Mo_0.1O_3−δ (LSCFM) by in situ scanning transmission electron microscopy (STEM) with energy-dispersive X-ray spectroscopy and DFT calculations. The doped Mo atoms occupy B sites of LSCFM, which increases the segregation energy of Co and Fe ions at B sites and improves the structural stability of LSCFM under a reducing atmosphere. In situ STEM measurements visualized sequential exsolution of Co and Fe ions, formation of CoFe alloy nanoparticles, and reversible exsolution and dissolution of CoFe alloy nanoparticles in LSCFM. The metal–oxide interface improves CO₂ adsorption and activation, showing a higher CO₂ electrolysis performance than the LSCFM counterparts.     

Rhombicuboctahedral Ag100: Four-Layered Octahedral Silver Nanocluster Adopting the Russian Nesting Doll Model

Precise atomic structure of metal nanoclusters (NCs) is fundamental for elucidating the structure–property relationships and the inherent size-evolution principles. Reported here is the largest known FCC-based (FCC=face centered cubic) silver nanocluster, [Ag₁₀₀(SC₆H₃^3,4F₂)₄₈(PPh₃)₈]⁻: the first all-octahedral symmetric nesting Ag nanocluster with a four-layered Ag₆@Ag₃₈@Ag₄₈S₂₄@Ag₈S₂₄P₈ structure, consistent symmetry elements, and a unique rhombicuboctahedral morphology distinct from theoretical predictions and previously reported FCC-based Ag clusters. DFT studies revealed extensive interlayer interactions and degenerate frontier orbitals. The FCC-based Russian nesting doll model constitutes a new platform for the study of the size-evolution principles of Ag NCs.     

Engineering the Charge-Transfer State to Facilitate Spin–Orbit Charge Transfer Intersystem Crossing in Spirobis[anthracene]diones

Spiro conjugation has been proposed to dictate the efficiency of charge transfer, which could directly affect the spin–orbit charge transfer intersystem crossing (SOCT-ISC) process. However, this process has yet to be exemplified. Herein, we prepared three spirobis[anthracene]diones, in which two benzophenone moieties are locked in close proximity and differentially functionalized to fine-tune the charge transfer state. Its feasibility for SOCT-ISC was theoretically predicted, then experimentally evaluated. Through fine-tuning the spiro conjugation coupling and varying the solvent dielectric constants, ISC rate constants were engineered to vary in a dynamic range of three orders of magnitude, from 7.8×10⁸ s⁻¹ to 1.0×10¹¹ s⁻¹, which is the highest ISC rate reported for SOCT-ISC system to our knowledge. Our findings substantiate the key factors for effective SOCT-ISC and offer a new avenue for the rational design of heavy atom free triplet sensitizers.     

Fe-Co Alloyed Nanoparticles Catalyzing Efficient Hydrogenation of Cinnamaldehyde to Cinnamyl Alcohol in Water

Selective hydrogenation of C=O against the conjugated C=C in cinnamaldehyde (CAL) is indispensable to produce cinnamyl alcohol (COL). Nonetheless, it is challenged by the low selectivity and the need to use organic solvents. Herein, for the first time, we report the use of Fe-Co alloy nanoparticles (NPs) on N-doped carbon support as a selective hydrogenation catalyst to efficiently convert CAL to COL. The resultant catalyst with the optimized Fe/Co ratio of 0.5 can achieve an exceptional COL selectivity of 91.7 % at a CAL conversion of 95.1 % in pure water medium under mild reaction conditions, ranking it the best performed catalyst reported to date. The experimental results confirm that the COL selectivity and CAL conversion efficiency are, respectively promoted by the presence of Fe and Co, while the synergism of the alloyed Fe-Co is the key to concurrently achieve high COL selectivity and CAL conversion efficiency.     

A Novel Phenoxazine-based Fluorescent Probe for the Detection of HOCl in Living Cells

Hypochlorous acid (HOCl), one of the reactive oxygen species (ROS), is a key microbicidal agent which is used for natural defense. However, it is also linked to varieties of human diseases owing to the overproduction of HOCl. Much effort has been made to exploit selective fluorescent sensors for the detection of HOCl, but most of them have some disadvantages such as short excitation wavelength, low selectivity, and slow response and so on. These restrict the biological application of the probes. In this work, BR-O was designed and synthesized on the base of phenoxazine for the detection of HOCl. BR-O exhibited a violent fluorescence enhancement in the presence of HOCl, showing excellent selectivity and high sensitivity. More importantly, the probe BR-O was capable of detecting exogenous and endogenous HOCl in living cells.     

山梨酸钾与Zn2+在NaCl溶液中对Q235钢的缓蚀协同作用

采用失重法、电化学法、X射线光电子能谱(XPS)和扫描电子显微镜(SEM)研究了0.5 mol/L NaCl溶液中,山梨酸钾(PS)与Zn²⁺对Q235钢的缓蚀协同效应。 失重实验结果表明,在0.5 mol/L NaCl溶液中,PS对Q235钢具有一定的缓蚀效果,缓蚀效率随PS质量浓度的增加而增大,当添加PS的质量浓度为25.0 g/L时,最大缓蚀效率仅为38.37%,而PS与Zn²⁺复配后存在显著的缓蚀协同作用,缓蚀效率高达91.03%。 动电势极化结果表明,PS与Zn²⁺混合物可同时抑制Q235钢的阴、阳极反应,属于阳极型缓蚀剂。 阻抗谱表明,该混合物可在电极表面形成致密的保护膜。 XPS分析证明保护膜是由PS、铁的氧化物/氢氧化物和Zn(OH)₂沉淀组成。     

应用极化水分子模型研究单分子层受限水的介电性质

受限条件下水的介电性质因测量极具挑战,其在诸多电化学过程与反应输运过程中如何扮演关键角色从未被定量地澄清.本工作利用平衡态分子动力学模拟和受限体系介电性质计算方法,系统性地探索了0.65 nm限域尺寸、5×10⁸ Pa限域压强、不同温度条件下单分子受限冰和受限水的介电性质.详细比较了恒定偶极矩SPC/E水分子模型和可极化的SWM4-NDP水分子模型在描述受限冰、水结构与介电性质上的优劣势,包括统计分析SWM4-NDP模型模拟的单分子层受限水和受限冰的瞬时分子偶极矩概率密度分布,计算每个模拟体系的静态结构因子、静态偶极空间关联函数、静态介电常数、体系偶极时间关联函数和德拜弛豫时间.首次发现了极化水分子模型描述的低维度受限水和受限冰的奇异分子极性变化,并观察到两种模型描述静态结构性质的效果相当,SWM4-NDP模型对于静态介电常数描述的优势会因受限条件的增强而被大幅削减.但在受限水介电极化弛豫动力学性质描述上SWM4-NDP模型明显优于SPC/E模型.我们推断SWM4-NDP模型在探索受限水结构相变动力学以及受限体系离子输运和溶剂化动力学等过程的模拟研究中是比SPC/E模型更好的选择.本工作将在进一步开展基于受限水系统储能、传感、输运的设计工作中提供一定的理论指导意义.     

Conjugated polymer nanoparticles as fluorescence switch for selective cell imaging

Fluorescence switch plays a vital role in bioelectronics and bioimaging.Herein,we presented a new kind of facile electrostatic complex nanoparticles(ECNs)for fluorescence switching in cells and marking of individual cell.The ECNs were prepared by mixing positively charged poly(6-(2-(thiophen-3-yl)ethoxy)hexyl trimethylammonium bromide)(PT)and negatively charged diarylethene sodium salt(DAECOONa).DAE-COONa is a photoswitchable molecule which can be transformed between the ring-closed fo rm and ring-open form under the irradiation of UV or visible light.The closed-form of DAE-COONa can efficie ntly quench the fluorescence of PT through intermolecular energy transfer,while the open form of DAE-COONa does not influence the emission of PT.Thus,the fluorescence of ECNs can be modulated by light irradiation,and the ECNs with good fluorescence switching performance have been employed for fluorescence imaging and individual cell lighting up process successfully.We demonstrate that the electrostatic complex strategy provides a facile method to construct fluorescence switch fo r selective cell marking and imaging applications.     

The theoretical study of dehydrogenation mechanism from Sr(NH2BH3)2

Structural Chemistry - A first-principle study of dehydrogenation mechanism from Sr(NH2BH3)2 was performed. Three different pathways were explored for Sr(NH2BH3)2 monomer, and the most favorable...     

Preparation of polypropylene/ethylene‐propylene‐diene terpolymer/nitrile rubber ternary thermoplastics vulcanizates with good mechanical properties and oil resistance by core‐shell dynamic vulcanization

As the most successful commercialized thermoplastic vulcanizates (TPVs), polypropylene (PP)/ethylene propylene rubber (EPDM) TPVs exhibit poor oil resistance. In this work, we prepared PP/EPDM/butadiene acrylonitrile rubber (NBR) ternary TPVs with good oil resistance using core‐shell dynamic vulcanization. According to the theoretical analysis of the spreading coefficient and the transmission electron microscopy results, the rubber phases exhibited a special core‐shell structure, in which the cross‐linkedNBR‐core was encapsulated by the EPDM‐shell. The core‐shell structure effectively improved the interfacial compatibility between PP and NBR phase as the EPDM‐shell could avoid the direct contact of them, thus improving the mechanical properties of the TPVs. For example, the PP/EPDM/NBR (40/30/30) ternary TPV showed enhanced tensile strength of 12.57 MPa, compared with 10.71 MPa of PP/EPDM (40/60) TPV and 11.11 MPa of PP/NBR (40/60) TPV, respectively. Moreover, the oil resistance of the TPVs was also improved. Compared with PP/EPDM TPV, the change rates in mass, volume, tensile strength and elongation at break of PP/EPDM/NBR TPV after oil immersion decreased by 42.18%, 48.69%, 52.68% and 28.77%, respectively.