Surprising selectivity in the transformation of dimethoxy azaindoles

Transformation of 4,7-dimethoxy-6-azaindole into 4-hydroxy-7-methoxy-6-azaindole or 7-hydroxy-4-methoxy-6-azaindole can be readily controlled by careful selection of a reagent. Treatment with concentrated HCl results in hydrolysis at the 4-position exclusively, while TMS-I provides demethylation at the 7-position only. Products were unambiguously identified by single crystal X-ray crystallography.     

Li2O·nB2O3-20%LiCl-H2O体系20℃过饱和溶液结晶动力学研究

用动力学方法对Li₂O·nB₂O₃-20%LiCl-H₂O体系(n=1,2,3)20℃过饱和溶液结晶过程进行研究，结果表明每一种溶液只析出一种固相，Li₂O∶B₂O₃=1∶1、1∶2和1∶3的氯化锂溶液分别结晶出Li₂O·B₂O₃·4H₂O, Li₂O·2B₂O₃·3H₂O和Li₂O·5B₂O₃·10H₂O，拟合并给出结晶动力学方程，同时对这三种固相的结晶反应机理进行了探讨。     

A modular nanoparticle-based system for reagentless small molecule biosensing

Metalloprotein tethered CdSe nanoparticles have been generated to provide selective and reagentless maltose biosensing. As opposed to cell or protein detection by semiconducting nanoparticle bioconjugates, a modular method for small-molecule detection using semiconducting nanoparticle bioconjugates has been difficult. Here we report a method for reagentless protein-based semiconducting nanoparticle biosensors. This method uses Ru(II) complex-CdSe nanoparticle interactions and the maltose-induced conformation changes of maltose binding protein to alter the CdSe nanoparticle fluorescence emission intensity. In this proof-of-principle system, the maltose-induced protein conformation changes alter the Ru(II) complex-CdSe nanoparticle interaction, which increases the CdSe emission intensity. Altered CdSe emission intensity effects are best described as electron transfer from the Ru(II) complex to the CdSe excited state forming the nonfluorescent CdSe anion. Four surface-cysteine, Ru(II) complex-attached maltose-binding proteins have been studied for maltose dependent alteration of CdSe emission intensities. With 3.0-3.5 nm diameter CdSe nanoparticles, all ruthenated maltose-binding proteins display similar maltose-dependent increases (1.4-fold) in CdSe emission intensity and maltose binding affinities (KA = 3 x 106 M-1). For these four systems, the only difference was the sample-to-sample variation in maltose-dependent responses. Thus, very few surface cysteine mutations need to be examined to find a successful biosensor, as opposed to analogous systems using organic fluorophores. This strategy generates a unimolecular, or reagentless, semiconducting nanoparticle biosensor for maltose, which could be applied to other proteins with ligand-dependent conformation changes.     

PIXE法分析共聚物中痕量氯

四氟乙烯和全氟4-甲基-3,6-二氧杂-△~7辛基磺酰氟在溶剂氟里昂-113(F-113)中进行自由基引发聚合反应时,共聚物(T-O)是否有链转移,可以通过测定所得共聚物中的含氯量来得以证实。我们首次应用质子X萤光分析法(PIXE)进行分析。结果表明,共聚物中含氯量小于1ppm,F-113溶剂并未发生链转移。同时,我们测定了已证明有F-113参与链转移反应的F_(40)试样,含氯量高达700ppm。     

超临界反应条件下Y型分子筛催化剂失活的研究

对苯烷基化过程中Ｙ型分子筛催化剂的失活进行了多方面的实验研究。结果表明，超临界条件下该催化剂的活性寿命比液相条件下长达四倍以上，借助色－质谱联用机分析两种操作的反应产物，发现含有多环物质，并且它们的种类和数量随条件而不同。根据热力学原理，建立了多环物在超蚧流体中的溶解模型，并以并四苯，并五苯和并六苯作为焦前物模拟物进行了计算。     

The preparation and fluorescence properties of europium nanoparticles

A new structured metallic nanomaterial of europium nanoparticle was prepared using tannic acid as the reductive agent,and nanoeuropium protein conjugates were synthesized by the method of lipoic acid modification on the surface of nanoparticle,which opens a new field of application of lanthanides in nanotechniques.Their properties were also characterized by UV-vis absorption spectroscopy,transmission electron microscopy (TEM),and fluorescence spectroscopy.The europium nanoparticle and its protein conjugates solution were stable and water-soluble.The fluorescence intensity of the composite europium nanoparticles was significantly increased in the presence of trace protein,and was linear proportional to the concentration of proteins under optimum conditions.According to this,a fluorimetric method for the determination of protein was developed in this paper.     

SYNTHESIS AND PROPERTIES OF SULFONATED POLY（ARYLENE ETHER） CONTAINING TRIPHENYL METHANE MOIETIES FROM ISOCYNATE MASKED BISPHENOL

A novel sulfonated poly（arylene ether） containing triphenylmethane moieties was synthesized by the sulfonation of a designed parent polymer using chlorosulfonic acid as sulfonation agent. The sulfonation took place at the para position of the pendant phenyl rings because of the specially designed parent polymer. The position and degree of sulfonation were characterized by ^1H-NMR and elemental analysis. The sulfonated polymers are highly soluble in common organic solvents, such as dimethylsulfoxide, N,N＇-dimethylacetamide, dimethylformamide, ethylene glycol monomethyl ether, and can be readily cast into tough and smooth films from solutions. The films showed good thermal and hydrolysis stabilities. Moreover, Fenton＇s reagent test revealed that the films exhibited superior stability to oxidation. The proton conductivities of the films were comparable with Nation 117 under same conditions. The membrane electrode assembly （MEA） prepared with the asmade film （706 EW, 100 μm dry thickness） shows better cell performance than Nation 115-MEA in the whole current density range.     

聚1,2-丁二烯的内聚能密度和玻璃化温度

本工作用环己烷-甲苯混合溶剂测定了不同1,2-链节含量的无定形聚1,2-丁二烯的溶解度参数,进而得到它们的内聚能密度,另外测定了它们的玻璃化温度。发现1,2-链节提高了聚1,2-丁二烯的玻璃化温度,同时稍稍降低了它们的内聚能密度。认为这是1,2-链节降低了聚1,2-丁二烯分子链柔顺性的缘故。     

Synthesis, crystal structure and magnetic behavior of two cobalt coordination polymers with 1,2-bis(1,2,4-triazol-1-yl)ethane and dicyanamide

Two cobalt(II) coordination polymers formed from bte (bte = 1,2-bis(1,2,4-triazol-1-yl)ethane), namely [Co(bte)₂(dca)₂]_n (1) and {[Co(bte)(dca)₂] · H₂O}_n (2), have been synthesized and characterized by elementary analyses, IR, thermogravimetric analyses, X-ray diffraction analyses and magnetic measurements. Compound 1 is a double-chain with Co(II) centers bridged by bte, containing metallocycles of [Co₂(bte)₂] and trans dca as termination ligands. In 2, each Co(II) center is bonded by two bridging bte ligands and four dca as μ-1,5-dca in different orientations in the 3D network.     

Adsorptive stripping measurements of germanium(IV) in the presence of pyrogallol

The adsorptive stripping voltammetric determination of germanium(IV) based on the adsorptive accumulation of the germanium(IV)-pyrogallol complex on a hanging mercury drop electrode is reported. The reduction current of the adsorbed germanium complex is measured by differential-pulse cathodic stripping voltammetry. The peak potential is at -0.42 V vs. Ag AgCl (saturated KCL). The effects of various parameters (ligand concentration, supporting electrolytic composition and concentration, accumulation potential and collection time) on the response are discussed. With controlled accumulation for 3 min, the detection limit is 1.2 x 10(-9) M germanium. The relative standard deviation (at 1.2 x 10(-8) M germanium) is 3.6%. Possible interferences are evaluated. The applicability of the method to the determination of germanium(IV) in ore samples was also successfully carried out.