Effect of Molecular Weight on the Properties of Poly（butylene succinate）

Poly（butylene succinate） （PBS） with different molecular weight was synthesized from 1, 4-butanediol and succinic acid by direct melt condensation. The synthesized PBS was identified by IH-NMR and FTIR spectrometry. The molecular weight was calculated from the intrinsic viscosity, and its value was between 20000 and 70000. The crystallization behavior and crystal morphology as function of molecular weight were investigated by DSC and PLM, respectively. The mechanical properties and hydrolytic degradation behaviors related with change of molecular weight were also studied in this work. The results demonstrated that the properties of PBS were determined by both molecular weight and crystallization properties （crystallinity as well as crystal morphology）. Our work is important for the design and preparation of PBS with proper molecular weight for its practical application.     

A New Near-Infrared Neutral pH Fluorescent Probe for Monitoring Minor pH Changes and its Application in Imaging of HepG2 Cells

A new near-neutral pH near-infrared (NIR) fluorescent probe utilizing a fluorophore–receptor molecular framework that can modulate the fluorescence emission intensity through a fast photoinduced electron transfer process was developed. Our strategy was to choose tricarbocyanine (Cy), a NIR fluorescent dye with high extinction coefficients, as a fluorophore, and N-methylpiperazine (MP) as a receptor. The pH titration indicated that MP-Cy can monitor the minor physiological pH fluctuations with a pKa of ～7.10 near physiological pH, which is valuable for intracellular pH researches. The probe responds linearly and rapidly to minor pH fluctuations within the range of 3.05–7.10 and exhibits strong dependence on pH changes. As expected, the real-time imaging of cellular pH and the detection of pH in situ was achieved successfully in living HepG2 cells by this probe. It is shown that the probe effectively avoids the influence of autofluorescence and native cellular species in biological systems and meanwhile exhibits high sensitivity, good photostability, and excellent cell membrane permeability.     

Mutation Breeding of Lycopene-Producing Strain Blakeslea Trispora by a Novel Atmospheric and Room Temperature Plasma (ARTP)

To improve the fermentation efficiency of lycopene, a plasma jet, driven by an active helium atom supplied with atmospheric and room temperature plasma (ARTP) biological breeding system, was used as a new method to generate mutations in Blakeslea trispora (?). After several rounds of screening, a mutant A5 with high concentration of lycopene and dry biomass was isolated, which showed a maximum lycopene concentration (26.4?±?0.2 mg/g dry biomass) which was 55 % higher than the parent strain (16.9?±?0.3 mg/g dry biomass) in the production of lycopene. Compared with parent strain, B. trispora A5 required less dissolved oxygen (10 % less than that of parent strain) to reach maximum concentration in a 5-L stirred tank reactor batch fermentation.     

Enhanced Expression of GCRV VP6 in CIK Cells by Relative Sequence Optimization

Efficient expression of target protein is one of strategies for gene therapy or vaccine design. Many studies showed that codon optimization could enhance the expression of target proteins. In this paper, a target sequence of about 1.26 kb encoding the major capsid protein VP6 of grass carp reovirus (GCRV) and an optimized counterpart were synthesized and inserted into vectors for expressing VP6. The final constructs (named as pcDV6G and pcDV6YG) were transfected in Ctenopharyngodon idellus kidney (CIK) cells. The fluorescence analysis and the Western blot results showed that the gene fragment was transfected and expressed in CIK cells successfully. Although the qRT-PCR results showed no difference at the messenger RNA (mRNA) levels between the different versions of vp6 in the indicated stages, the enzyme-linked immunosorbent assay (ELISA) results showed that the protein level of VP6 expressed by pcDV6YG was higher than that by pcDV6G in the indicated hours. Taken together, these results suggest that the enhanced expression of GCRV VP6 in CIK cells by relative sequence optimization may be a good choice for making DNA vaccine against GCRV.     

Essential Role of the N- and C-terminals of Laccase from Pleurotus florida on the Laccase Activity and Stability

POXA1b is the most thermostable laccase isoenzyme from Pleurotus ostreatus. POXA1b is remarkably stable at alkaline pH (the t_1/2 at pH 10 was 30 days), and its C-terminal affects its catalytic and stability properties. We cloned POXA1c from P. florida, which showed 99 % identity with POXA1b. POXA1c was functionally expressed in Pichia pastoris. The functions of the N and C termini of POXA1c were investigated using site-directed mutagenesis. Compared with POXA1c, the N-terminal R5V site effectively increased the specific activities for 2,2′-azino-bis(3-ethylbenzothiazoline-6-sulfonic acid) (ABTS) and guaiacol by 2- and 3.5-fold, respectively. A C-terminal truncated mutant, POXA1c△13, also increased the specific activities for ABTS and guaiacol by 2.3- and 3.4-fold, respectively. A double mutant, POXA1cΔ13-R5V, combined the R5V and △13 effects. The specific activity of this double mutant for ABTS was 1,321 U/mg, which indicated a 4-fold increase compared with the wild type. The role of residue V5 on laccase catalytic properties was also observed for laccases from Trametes versicolor and Rigidoporus lignosus. The specific activities of the V5R of the laccases from T. versicolor and R. lignosus were half of that of the wild type. The pH and thermal stability analysis of POXA1c and its mutants showed that the enzymes were remarkably stable because they showed 63 % residual activity after incubation for 108 h at 30 °C over a pH range of 4.5 to 9.0. Similar results were observed for POXA1cΔ13-R5V. POXA1cΔ13-R5V can be widely used in industrial biotechnology because of its excellent catalytic properties.     

Synthesis and self-assembly behavior of thermoresponsive poly(oligo(ethylene glycol) methyl ether methacrylate)-POSS with tunable lower critical solution temperature

This article reports on the synthesis of a novel amphiphilic polyhedral oligomeric silsesquioxane (POSS) end-capped poly(2-(2-methoxyethoxy)ethyl methacrylate)-co-oligo(ethylene glycol) methacrylate) (POSS-P(MEO₂MA-co-OEGMA)). These thermoresponsive organic–inorganic hybrid polymers exhibit critical phase transition temperature in water, which can be finely tuned by changing the feed ratio of OEGMA and MEO₂MA. The lower critical solution temperature (LCST) of POSS-P(MEO₂MA-co-OEGMA) increases from 31 to 59 °C with the increasing of OEGMA content. Dynamic light scattering (DLS) and transmission electron microscopy (TEM) studies show that these polymers can self-assemble into spherical micelles with the thermosensitive block into the corona and the POSS forming the core, and larger aggregates are formed when the temperature values are above their LCSTs. These thermoresponsive polymers POSS-P(MEO₂MA-co-OEGMA) with self-assembly behavior and tunable tempetature-responsive property have the potential applications in material science and biotechnology.     

Aggregation behavior of pH- and thermo-responsive block copolymer protected gold nanoparticles

Two distinctive block copolymers protected gold nanoparticles (AuNPs) were prepared with poly(methylacrylic acid)-block-poly(N-isopropylacrylamide) (SH-PMAA₆₄-b-PNIPAM₃₅) and poly (N-isopropylacrylamide)-block-poly(methylacrylic acid) (SH-PNIPAM₄₀-b- PMAA₆₀) through strong gold-sulfur bonding. The hybrid NPs have a pH-responsive inner shell (or corona) and a thermo-responsive corona (or inner shell) due to different location relations of the PNIPAM and PMAA on the surface of AuNPs. Then, the aggregation behaviors, as well as the changes of optical properties, of two hybrid NPs were compared in response to both stimuli. The results showed the obvious inter-particle aggregation caused by the phase transition for hydrophobic coronal polymer. However, the particles of hydrophilic corona layer retained good dispersion and the pH-responsive or thermo-responsive characteristics of shell layer made relatively minor changes.     

Weak acid–base interaction induced assembly for the formation of rambutan-like poly(styrene-alt-maleic anhydride)/silica composite microspheres

To investigate the effect of surface functionality on the morphology of polymer/silica composite, poly(styrene-alt-maleic anhydride) (SMA) spheres prepared via precipitation polymerization method was employed. In water/ethanol solution, diethanolamine (DEA) was used to catalyze the hydrolysis reaction of tetraethoxysilane (TEOS), and rambutan-like poly(styrene-alt-maleic anhydride)/silica (SMA/SiO₂) microspheres were synthesized through in situ sol–gel process. The obtained structure and morphology were characterized by FTIR, NMR, TEM, SEM, and TGA. The results showed that the hydrolyzed SMA chains on the surface was crucial to the nucleation and growth of silica, and the morphologies of SMA/SiO₂ composite microspheres can be controlled by the amount of DEA and the ratio of SMA/TEOS. In addition, the SMA/SiO₂ microspheres were used to prepare hierarchical structure of SMA/SiO₂/Ag particles, which were utilized for the construction of surface-enhanced Raman scattering substrate (SERS).     

纤连蛋白在石墨烯修饰二氧化钛表面吸附的计算机模拟

采用全原子分子动力学模拟方法研究了纤连蛋白(FN)在金红石表面、23%石墨烯覆盖率的金红石表面、92%石墨烯覆盖率的金红石表面、石墨表面的吸附行为.模拟结果表明:FN在金红石表面吸附不稳定.通过石墨烯修饰二氧化钛表面可降低金红石表面的亲水性;当表面含有石墨烯层时,FN都将稳定地吸附在表面上.在23%石墨烯覆盖率的金红石表面上,FN的特异性识别位点朝向溶液而有利于整合素识别.DSSP分析结果显示在40 ns的分子动力学模拟过程中,FN的七个β-折叠结构在所有体系中均没有发生太大变化.由于有石墨烯层存在,表面附近水分子层密度减小.FN的表面吸附能随着表面石墨烯覆盖率的增加而增大.石墨烯修饰能加强二氧化钛表面对蛋白质的吸附.本工作可以为移植体修饰生物材料设计与开发提供参考.     

Three dimension Liesegang rings of calcium hydrophosphate in gelatin

Three dimensional Liesegang spherical layers of CaHPO₄ in gelatin ball were performed by employing CaCl₂ and Na₂HPO₄ as the inner and outer electrolyte, respectively. Effects of concentrations of inner and outer electrolyte as well as pH on the morphologies of Liesegang rings (LRs) were investigated. As a result, it was observed that the time law, spacing law and width law found in 1D/2D gel systems were obeyed in this 3D gelatin system. The interaction of Ca²⁺ and HPO₄ ^2? with gelatin matrix played a key role to the formation of LRs due to the existence of carboxylic groups on the gelatin chains. Using Ca²⁺ as the inner electrolyte, LRs were prepared. However, employing HPO₄ ^2? as inner electrolyte, LRs were not obtained. Moreover, pH of gelatin solution greatly impacted on the formation of LRs. The number of LRs increased with the decrease of pH, whereas the width inversely decreased. pH 4.40 was a turn point, from which the spacing coefficient abruptly increased as pH increased. All these results indicated that the network was created by the interaction of Ca²⁺ and –COO^? of gelatin chains, which dominated the formation of CaHPO₄ LRs in gelatin.