Surface-Modified Sb2S3 Nanoparticles and Their Tribological Behaviors in Liquid Paraffin

Sb₂S₃ nanoparticles surface-modified with S-tetradecyl N, N-dihydroxyethyl dithiocarbamate (C₁₄DTC-Sb₂S₃) have been synthesized via extraction of Sb₂S₃ colloidal particles from ethylene glycol into toluene in the presence of C₁₄DTC. The obtained products were characterized by high-resolution transmission electron microscope (HRTEM) and Fourier transformation infrared (FTIR), and their tribological behaviors as an additive in liquid paraffin were investigated using a four-ball tribometer. The results show that C₁₄DTC-Sb₂S₃ nanoparticles can significantly improve the friction reduction, anti-wear, and load-carrying properties of base oils. The preliminary lubrication mechanism was discussed based on the SEM and XPS investigation of the rubbed surfaces.     

Sedimentation rate in the Sungai Linggi estuary using excess 210Pb and 137Cs

The purpose of this study was to estimate the sedimentation rate in the Sungai Linggi estuary using the constant initial concentration of unsupported or excess ²¹⁰Pb model and verified with ¹³⁷Cs method. Five sediment cores were collected on 25 January 2011 using gravity corer with the inner tube of 50 cm length and 7.5 cm diameter. The total ²¹⁰Pb activities in the sediment cores profile at all sampling stations were varied and upper than those obtained for supported ²¹⁰Pb i.e. ²²⁶Ra, indicated disequilibrium among ²¹⁰Pb and its grandparents in the ²³⁸U decay series. Meanwhile, the lower ¹³⁷Cs activities were observed at all sampling stations due to no significant sources of ¹³⁷Cs releases were transferred into Malaysian marine. The estimation of sedimentation rate indicated the agreement of ²¹⁰Pb and ¹³⁷Cs method with a general presence of deep mixing in the Sungai Linggi estuary. Therefore, the apparent sedimentation rates calculated from ²¹⁰Pb profiles generally reflect the true value with the range from 0.70 to 1.97 cmyr^?1. High sedimentation rate was observed at some sampling stations which are located in river channel, estuary and closer to mainland. This suggested that land-use development, agriculture activities, channelization etc. introduced a large amount of sediment loaded into those areas.     

Synthesis and mesomorphism of 4,4'-bis(omega-hydroxyalkoxy)-alpha-methylstilbenes

A homologous series of 4,4'-bis(omega-hydroxyalkoxy)-alpha-methylstilbenes, denoted HAMS-n, has been synthesized. Here n is the carbon atom length of the peripheral n-alkyl chain; in this work n = 2 to 8 and 11. The composition, microstructure, thermal properties, and mesomorphism of the homologues were determined using elemental analysis, ¹H NMR, FTIR, DSC, wide angle X-ray diffraction, and polarizing optical microscopy with a heating stage. The influence of the length and the even/odd numbers of methylene units of the peripheral chains on the variants of mesomorphism and the stability of mesophases, as well as on their transition temperatures, are discussed. The homologues with n = 8 and 11 were enantiotropic monomorphic, CrG (or CrH). The odd homologues showed monotropic trimorphism on cooling, while the even homologues exhibited enantiotropic trimorphism. A pronounced even/odd effect on the melting temperatures was observed.     

Naphthalene and benzene levels in microenvironments associated with potential exposure: new and old apartments with moth repellents,and cabins of passenger cars

A lesser degree of information is available with respect to microenvironments associated with potential exposure to naphthalene, in comparison with other volatile organic compounds. The current study investigated the levels of benzene as well as naphthalene, both in the indoor and outdoor air of apartments and in the cabins of passenger cars. Two groups of 20 apartment buildings (20 new and 20 old) were chosen on the basis of the selection criteria (apartment location and size). In addition, 10 actual commuters were recruited for this study. The equal number of drivers was recruited for the study for comparison of two types of fuels for vehicles (five drivers of gasoline-fuelled and five drivers of diesel-fuelled passenger cars). Indoor naphthalene concentrations were similar between old and new apartments, while the benzene concentrations in new apartments were significantly higher than those of old apartments. The naphthalene concentrations in bedrooms, where wardrobes with moth repellent (MRs) were placed, were significantly higher than those for living rooms where no MRs were present. In turn, these indoor concentrations were significantly higher than outdoor levels. It is noteworthy that the mean and median values of naphthalene measured in the bedrooms exceeded the USEPA RfC (inhalation reference concentration) of 3?µg?m^?3, and the living room values were close to the RfC, while the residential benzene levels exceeded the European benzene limit of 5?µg?m^?3. In contrast, the maximum outdoor levels were well below that of the RfC. The use of passenger cars appeared to be a significant daily activity for both naphthalene and benzene exposure. The naphthalene-to-benzene ratios varied with the type of microenvironments. Both the indoor naphthalene and benzene concentrations in the present study were much higher than those of other studies.     

Hydrogen production by steam reforming of glycerol over Ni/Ce/Cu hydroxyapatite-supported catalysts

Hydroxyapatite-supported Ni-Ce-Cu catalysts were synthesised and tested to study their potential for use in the steam reforming of glycerol to produce hydrogen. The catalysts were prepared by the deposition-precipitation method with variable nickel, cerium, and copper loadings. The performance of the catalysts was evaluated in terms of hydrogen yield at 600°C in a tubular fixed-bed microreactor. All catalysts were characterised by the BET surface area, XRD, TPR, TEM, and FE-SEM techniques. The reaction time was 240 min in a fixed-bed reactor at 600°C and atmospheric pressure with a water-to-glycerol feed molar ratio of 8: 1. It was found that the Ni-Ce-Cu (3 mass %-7.5 mass %-7.5 mass %) hydroxyapatite-supported catalyst afforded the highest hydrogen yield (57.5 %), with a glycerol conversion rate of 97.3 %. The results indicate that Ni/Ce/Cu/hydroxyapatite has great potential as a catalyst for hydrogen production by steam reforming of glycerol.     

Polarization-controlled leakage current and photovoltaic effect in highly preferentially oriented BiFeO3 film

Highly preferentially oriented polycrystalline BiFeO₃ thin film was grown on FTO/glass substrate by a sol–gel method annealed at 500 °C. XRD result showed that the film adopts highly (100) preferential orientation. SEM results indicate that the film is composed of large grains of 40–200 nm and the thickness is about 320 nm. Room temperature saturated polarization and large Pr ~55 μC/cm² were obtained. Leakage current was substantially reduced by the controlling of ferroelectric polarization. Polarization-modulated conduction mechanism was studied. Moreover, substantial photovoltaic effect was observed.     

Exploring the Reactivity of Multicomponent Photocatalysts: Insight into the Complex Valence Band of BiOBr

The band structure of multicomponent semiconductor photocatalysts, as well as their reactivity distinction under different wavelengths of light, is still unclear. BiOBr, which is a typical multicomponent semiconductor, may have two possible valence‐band structures, that is, two discrete valence bands constructed respectively from O 2p and Br 4p orbitals, or one valence band derived from the hybridization of these orbitals. In this work, aqueous photocatalytic hydroxylation is applied as the probe reaction to investigate the nature and reactions of photogenerated holes in BiOBr. Three organic compounds (microcystin‐LR, aniline, and benzoic acid) with different oxidation potentials were selected as substrates. Isotope labeling (H₂¹⁸O as the solvent) was used to determine the source of the O atom in the hydroxyl group of the products, which distinguishes the contribution of different hydroxylation pathways. Furthermore, a spin‐trapping ESR method was used to quantify the reactive oxygen species (^.OH and ^.OOH) formed in the reaction system. The different isotope abundances of the hydroxyl O atom of the products formed, as well as the reverse trend of the ^.OH/^.OOH ratio with the oxidative resistance of the substrate under UV and visible irradiation, reveal that BiOBr has two separate valence bands, which have different oxidation ability and respond to UV and visible light, respectively. This study shows that the band structure of semiconductor photocatalysts can be reliably analyzed with an isotope labeling method.     

Practical and Highly Selective C?H Functionalization of Structurally Diverse Ethers

A trityl ion mediated C H functionalization of ethers with a wide range of nucleophiles at ambient temperature has been developed. The reaction displays high chemoselectivity and good functional group tolerance. The protocol also exhibits excellent regio‐ and diastereoselectivities for the unsymmetric ethers, thus stereoselectively generating highly functionalized disubstituted 2,5‐trans tetrahydrofurans (THF), 2,6‐trans tetrahydropyrans (THP), 2,6‐trans dihydropyrans (DHP), and 1,3‐trans isochromans, and highlighting the capacity of the protocol in complex molecule synthesis.     

Anti-Inflammatory Activity and Mechanism of Isookanin,Isolated by Bioassay-Guided Fractionation from Bidens pilosa L.

Bidens pilosa L. (Asteraceae) has been used historically in traditional Asian medicine and is known to have a variety of biological effects. However, the specific active compounds responsible for the individual pharmacological effects of Bidens pilosa L. (B. pilosa) extract have not yet been made clear. This study aimed to investigate the anti-inflammatory phytochemicals obtained from B. pilosa. We isolated a flavonoids-type phytochemical, isookanin, from B. pilosa through bioassay-guided fractionation based on its capacity to inhibit inflammation. Some of isookanin’s biological properties have been reported; however, the anti-inflammatory mechanism of isookanin has not yet been studied. In the present study, we evaluated the anti-inflammatory activities of isookanin using lipopolysaccharide (LPS)-stimulated RAW 264.7 macrophages. We have shown that isookanin reduces the production of proinflammatory mediators (nitric oxide, prostaglandin E₂) by inhibiting the expression of inducible nitric oxide synthase (iNOS) and cyclooxygenase-2 (COX-2) in LPS-stimulated macrophages. Isookanin also inhibited the expression of activator protein 1 (AP-1) and downregulated the LPS-induced phosphorylation of p38 mitogen-activated protein kinase (MAPK) and c-jun NH₂-terminal kinase (JNK) in the MAPK signaling pathway. Additionally, isookanin inhibited proinflammatory cytokines (tumor necrosis factor-a (TNF-α), interleukin-6 (IL-6), interleukin-8 (IL-8), and interleukin-1β (IL-1β)) in LPS-induced THP-1 cells. These results demonstrate that isookanin could be a potential therapeutic candidate for inflammatory disease.     

Mycomedicine: A Unique Class of Natural Products with Potent Anti-tumour Bioactivities

Mycomedicine is a unique class of natural medicine that has been widely used in Asian countries for thousands of years. Modern mycomedicine consists of fruiting bodies, spores, or other tissues of medicinal fungi, as well as bioactive components extracted from them, including polysaccharides and, triterpenoids, etc. Since the discovery of the famous fungal extract, penicillin, by Alexander Fleming in the late 19th century, researchers have realised the significant antibiotic and other medicinal values of fungal extracts. As medicinal fungi and fungal metabolites can induce apoptosis or autophagy, enhance the immune response, and reduce metastatic potential, several types of mushrooms, such as Ganoderma lucidum and Grifola frondosa, have been extensively investigated, and anti-cancer drugs have been developed from their extracts. Although some studies have highlighted the anti-cancer properties of a single, specific mushroom, only limited reviews have summarised diverse medicinal fungi as mycomedicine. In this review, we not only list the structures and functions of pharmaceutically active components isolated from mycomedicine, but also summarise the mechanisms underlying the potent bioactivities of several representative mushrooms in the Kingdom Fungi against various types of tumour.