Janus 粒子在环境检测领域中的应用

Janus 粒子,也称为阴阳结构粒子或两面性非对称粒子,是指表面上具有两种或两种以上不同化学组成或性质的不对称粒子。目前,Janus 粒子因其独特的结构和功能已经逐渐成为生物医药、催化、材料以及防污等领域中的新型功能材料。在环境检测领域,Janus材料亦因其特殊的光学、磁学及电学性能,为提高检测灵敏度、选择性和稳定性等提供了新的研究方向。基于此,本文主要讨论了Janus材料在环境检测方面的特点、优势和相关应用。最后,本文基于本课题组的研究经验以及工作中所面临的问题,对本领域的发展和未来的研究方向提出了展望,以期对本领域的未来发展提供指导。     

大孔高镍LiNi0.8Co0.1Mn0.1O2正极材料的制备及其电化学性能研究

本工作以聚甲基丙烯酸甲酯(PMMA)微球组装成的胶晶模板作为铸模,溶胶-凝胶法辅助获得大孔LiNi0.8Co0.1Mn0.1O2 (NCM811)正极材料.结果 表明,利用PMMA作为造孔剂,形成了由100nm的颗粒堆积而成的大孔结构,这种结构有效地提高了材料的倍率性能和循环稳定性.大孔NCM811在0.1C的首次放电...     

Online Column Extraction Coupled with Double-Trap Column System for HPLC Determination of Valproic Acid in Human Plasma Without Derivatization

Chromatographia - An automated online column extraction coupled with high-performance liquid chromatography (HPLC) and equipped with a double-trap column system was developed to determine valproic...     

ZIF-derived mesoporous carbon materials prepared by activation via Na2SiO3 for supercapacitor

Metal organic frameworks (MOFs) derived carbonaceous materials have a wide range of applications in the fields of energy storage, catalysis, adsorption and separation, etc. Especially, zeolitic imidazolate framework-8 (ZIF-8) is an excellent candidate to synthesize porous carbon due to the large surface area and high nitrogen content. However, the dominated microporous structure of ZIF-8-derived carbon significantly hinders ionic mass transfer, limiting the improvement of performance. Herein, MOF-derived mesoporous carbon was prepared using ZIF-8 as carbon precursor and cheap sodium silicate (Na₂SiO₃) as activator. The introduction of Na₂SiO₃ created rich mesoporous structure and increased specific surface area, as well as the effects of pyrolysis temperature and Na₂SiO₃ dosage on performance was also investigated. The obtained ZIF-derived porous carbon exhibits good electrochemical performance with specific capacitance of 263 F/g at 1 A/g and excellent cycle life (96.07% after 10,000 GCD cycles) in supercapacitor. The use of cheap Na₂SiO₃ activator provides a new orientation for the preparation of MOF-derived carbons with rich pores, high surface area, and facilitates the large-scale application of MOF-derived carbons.     

顶空气相色谱法测定瑞替加滨原料药中残留溶剂

建立了测定瑞替加滨原料药中残留溶剂乙醇、正己烷、四氢呋喃、三乙胺的顶空气相色谱方法。采用氢火焰离子化检测器,以N,N-二甲基甲酰胺为样品溶剂,通过对色谱条件优化,建立了以DB-624为分析柱、110℃为平衡温度、15 min为平衡时间的残留溶剂测定方法。经方法学验证,上述4种溶剂的方法检出限依次为0.007 5%、0.000 48%、0.002 4%、0.01%;峰面积的相对标准偏差均小于2.1%;平均回收率为100%～102%;4种溶剂的线性系数均大于0.995。结果表明,该方法的检测灵敏度高、精密度好、准确度高、线性关系良好,能够满足对瑞替加滨质量的控制要求。将该方法应用于3批瑞替加滨原料药的残留溶剂检测,均只检出乙醇和正己烷,且乙醇和正己烷的最高残留量分别为0.149%和0.022%,均未超出限量规定。     

Mechanism studies of thermolysis process in copolyamide 66 containing triaryl phosphine oxide

Thermolysis behavior of flame-retardant copolyamide 66 (FR-PA66) in the presence of triaryl phosphine oxide (TPO) has been studied using different techniques such as differential scanning calorimetry, thermal gravimetric analysis, Fourier transform-infrared spectroscopy, and gas chromatography–mass spectrometry. The results indicate that TPO extends the thermolysis time of FR-PA66, and improves the thermolysis temperature. A three-stage mechanism for the decomposition of FR-PA66 has been proposed in this article. In the first stage, cleavage of P–C bond takes place in FR-PA66, while in the second stage, cleavage of polyamide chain occurs mainly. In the third stage, formation of cyclic compounds proceeds along with the formation of carbonized protective layer on the degraded polymer.     

一种交联聚合物薄膜的表面引发聚合制备及其摩擦磨损性能

采用活性可控的表面引发原子转移自由基聚合方法,在硅片表面制备了聚3-(三甲氧基硅)丙基甲基丙烯酸酯聚合物刷,其中产物侧链的三甲氧基硅基团提供相邻分子间相互交联的位点而形成聚合物薄膜;采用衰减全反射红外光谱仪和原子力显微镜分析了薄膜的化学结构和微观形貌,利用椭圆偏光测厚仪和接触角测量仪测定了其厚度和水接触角,并利用微观和宏观摩擦磨损测试装置评价了薄膜的摩擦磨损性能.结果表明,所制备的薄膜具有聚合物的结构特征以及良好的减摩抗磨特性,且其抗磨能力随着厚度增加而增强.     

8-羟基喹啉-7-醛缩酰肼席夫碱的绿色合成及抗肿瘤活性研究

以水为反应介质,微波辐射促进8-羟基-7-喹啉甲醛与取代芳酰肼的缩合反应,制备了15种喹啉酰腙席夫碱化合物。反应在15～30min内完成,收率较高、后处理操作简便。化合物结构经1H NMR、13CNMR、IR和高分辨质谱确证。初步抗肿瘤活性测试结果表明,在20μg/mL浓度下,部分化合物对细胞周期分裂蛋白25B(CDC 25B)抑制率达到90%以上,具有潜在的抗肿瘤活性。     

高分子模板调控不同形貌氧化亚铜的仿生合成

采用聚丙烯酰胺(PAM)为软模板,在CuSO4、Na2SO3体系中调控合成了片状、海胆状、一维线、针状聚集体氧化亚铜晶体。研究了不同浓度Cu2+、不同PAM含量及不同温度对晶体生长的影响。结果表明,PAM促使氧化亚铜异相成核,氧化亚铜形貌随PAM质量分数的变化而变化:当c(Cu2+)=0.5mol.L-1时,PAM质量分数为3.0%(常温引入体系),产物主要为片状晶体;PAM质量分数为1.0%、3.0%时(高温引入体系),分别获得一维线状、海胆状晶体;当Cu2+浓度为0.1 mol.L-1时,体系中高温引入质量分数3.0%的PAM,得到片层状晶体;当Cu2+浓度为0.3、0.4 mol.L-1时,得到针状聚集体氧化亚铜晶体。分别用X射线粉末衍射、冷场发射扫描电子显微镜和激光粒度仪对所制备的产品进行了表征。