RS和GIS技术在新疆地质和矿产资源评价中的应用

发展宏观、快速、高效地资源管理及评价方法是开展现代地质找矿工作的需要，“3S”技术由于具有上述特点而在地质找矿领域得到越来越广泛的应用。本文针对新疆地质找矿现状，通过对“3S”技术特点的介绍，在以往新疆地质找矿工作的基础之上，系统的提出了在新疆运用RS和GIS技术建立遥感本底数据库及进行矿产资源评价、地质灾害预测的主要内容、方法，同时指出了存在的问题和发展前景。     

氮化铝结构的高温Raman光谱分析

本文测量了氮化铝在不同温度下的Raman光谱 ,并确定了氮化铝的光学声子模E2 1、A1(TO)、E2 2 、E1(TO)、A1(LO)和E1(LO)Raman散射峰的频率 ,它们分别为 2 5 2cm- 1、6 1 4cm- 1、6 5 8cm- 1、6 72cm- 1、894cm- 1和 91 2cm- 1,其中光学声子模A1(TO)、E2 2 的Raman散射峰比较明显。随着温度的升高 ,A1(TO)、E2 2 散射峰的频率向低波数方向变化 ,表明氮化铝粉末压制体中存在的压应力逐渐减小 ;这两个散射峰的半高宽逐渐增大 ,说明随着温度的升高 ,存在氮原子和铝原子的扩散使得氮化铝粉末压制体中晶体结构逐渐发生变化。由于氮化铝粉末本身在空气中易与水蒸气发生反应 ,生成的Al(OH) 3 或AlOOH在加热过程会发生分解 ,干扰样品高温Raman光谱测量。     

应用模糊综合评判方法优选非均质油藏调剖井和层

通过注水保持油层压力的方法开发非均质油藏,不可避免会造成油井含水或部分油井水淹.注入水窜入油井时,不管低渗透层是否受到开发,大部分注入水进入到高渗透层,因而使低渗透层在开发过程中采油速度很慢,或是基本未投入生产.为了降低产水量,保持或提高采油量,必须对已开发的非均质油藏实施相应的堵水调剖措施,防止注入水沿高渗透带水锥突进到油井,影响水驱采收率.本文建立了应用模糊综合评判方法优选非均质油藏调剖井和层的数学模型,通过实例分析表明,运用综合评判方法优选调剖井和层是一种客观有效的方法,该评价方法计算方便,易于操作和推广.     

Design and exploration of 5-nitro-3-trinitromethyl-1H-1,2,4-triazole and its derivatives as energetic materials

Molecular Diversity - According to the fact that 5-nitro-3-trinitromethyl-1H-1,2,4 triazole (NTNMT) is a successful, good explosive, energetic groups such as –CH3, –NH2, –NHNO2,...     

Simultaneous determination of aurantio‐obtusin,chrysoobtusin, obtusin and 1‐desmethylobtusin in rat plasma by UHPLC‐MS/MS

A sensitive and reliable ultra‐high‐performance liquid chromatography–electrospray ionization–tandem mass spectrometry (UHPLC‐MS/MS) method was developed and validated for the simultaneous determination of four active components of Semen Cassiae extract (aurantio‐obtusin, chrysoobtusin, obtusin and 1‐desmethylobtusin) in rat plasma after oral administration. Chromatographic separation was achieved on an Agilent Poroshell 120 C₁₈ column with gradient elution using a mobile phase that consisted of acetonitrile‐ammonium acetate in water (30 mm ) at a flow rate of 0.4 mL/min. Detection was performed by a triple‐quadrupole tandem mass spectrometer in multiple reaction monitoring mode. The calibration curve was linear over a range of 3.24–1296 ng/mL for aurantio‐obtusin, 0.77–618 ng/mL for chrysoobtusin, 34.55–1818 ng/mL for obtusin and 1.86–1485 ng/mL for 1‐desmethylobtusin. Inter‐ and intra‐day assay variation was <15%. All analytes were shown to be stable during all sample storage and analysis procedures. Copyright © 2013 John Wiley & Sons, Ltd.     

Molecular structure and properties of click hydrogels with controlled dangling end defect

In this study, controlled amount of dangling ends is introduced to the two series of poly(ethylene glycol)‐based hydrogel networks with three and four crosslinking functionality by using click chemistry. The structure of the gels with regulated defect percentage is confirmed by comparing the results of low‐field NMR characterization and Monte Carlo simulation. The mechanical properties of these gels were characterized by tensile stress–strain behaviors of the gels, and the results are analyzed by Gent model and Mooney–Rivlin model. The shear modulus of the swollen gels is found to be dependent on the functionality of the network, and decreases with the defect percentage. Furthermore, the value of shear modulus well obeys the Phantom model for all the gels with varied percentage of the defects. The maximum extension ratio, obtained from the fitting of Gent model, is also found to be dependent on the functionality of the network, and does not change with the defect percentage, except at very high defect percentage. The value of the maximum extension ratio is between that predicted from Phantom model and the Affine model. This indicates that at the large deformation, the fluctuation of the crosslinking points is suppressed for some extend but still exists. Polymer volume fractions at various defect percentages obtained from prediction of Flory–Rehner model are found to be in well agreement with the swelling experiment. All these results indicate that click chemistry is a powerful method to regulate the network structure and mechanical properties of the gels. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2016 , 54, 1227–1236     

表面增强拉曼光谱技术在食品安全检测中的应用研究进展

表面增强拉曼光谱(SERS)是一种新型的快速检测技术,具有信息含量丰富、灵敏度高、操作简便、可无损检测等优点,在食品安全领域有很大的实际应用价值。该文介绍了表面增强拉曼光谱技术的发展历程、增强机理、基底的分类与应用以及检测模式,综述了表面增强拉曼光谱技术在食品有害小分子物质、食源性致病菌、重金属污染和真菌毒素等方面快速检测的最新研究进展,并提出了亟待解决的问题和发展趋势。     

溴代阻燃剂与甲状腺素运载蛋白相互作用的非变性电喷雾质谱研究

该文采用非变性电喷雾质谱法(Native electrospray ionization mass spectrometry,ESI-MS)与分子对接模拟计算(MD)分别研究了1种溴代阻燃剂和2种羟基化代谢物,即3,5,3',5'-四溴-4,4'-二羟基基二苯砜(TBS)、4-羟基-2,2',3,4',5,5',6-八溴联苯醚(4-OH-BDE-187)、6-羟基-2,2',3,4,4',5,5'-八溴联苯醚(6-OH-BDE-180)与甲状腺素运载蛋白(TTR)的相互作用情况。ESI-MS结果表明,在37℃及生理pH值条件下的醋酸铵缓冲溶液中,TBS与TTR蛋白可形成稳定的化学计量比为1∶1的复合物,4-OH-BDE-187、6-OH-BDE-180可与TTR蛋白分别形成稳定的化学计量比为1∶1和2∶1的复合物。通过分子对接模拟计算方法推测了上述3种配体与TTR可能的结合模型,发现3种配体与TTR的结合位点位于ASP-74残基附近。研究结果可为进一步了解溴代阻燃剂及其羟基化代谢产物体内的生物过程及毒性机制提供实验基础。     

高效毛细管电泳法测定泳池中尿液指示物乙酰磺胺酸钾

建立了高效毛细管电泳测定游泳池水中新型尿液指示物乙酰磺胺酸钾含量的新方法。采用内壁无涂层熔融石英毛细管(60.2 cm×75μm,有效长度50 cm)进行分离,缓冲液为10 mmol/L硼砂溶液(pH 9.3),分离电压为24 k V,进样时间为20 s,检测波长为226 nm。取游泳池水样过滤,经固相萃取小柱浓缩富集后直接进样分析。结果显示:在优化条件下,乙酰磺胺酸钾在0.2~100.0 mg/L质量浓度范围内线性良好(r=0.999 8),检出限为50.0μg/L,迁移时间和峰高的相对标准偏差(RSD)分别为0.73%和1.8%,加标回收率为96.0%~103.6%。该方法简单快速、准确可靠,适用于游泳池水中乙酰磺胺酸钾的检测。