New multifunctional porous materials based on inorganic-organic hybrid single-walled carbon nanotubes: gas storage and high-sensitive detection of pesticides

Single-walled carbon nanotubes (SWNTs) that are covalently functionalized with benzoic acid (SWNT-PhCOOH) can be integrated with transition-metal ions to form 3D porous inorganic-organic hybrid frameworks (SWNT-Zn). In particular, N(2) -adsorption analysis shows that the BET surface area increases notably from 645.3 to 1209.9?m(2) g(-1) for SWNTs and SWNT-Zn, respectively. This remarkable enhancement in the surface area of SWNT-Zn is presumably due to the microporous motifs from benzoates coordinated to intercalated zinc ions between the functionalized SWNTs; this assignment was also corroborated by NLDFT pore-size distributions. In addition, the excess-H(2) -uptake maximum of SWNT-Zn reaches about 3.1?wt.?% (12?bar, 77?K), which is almost three times that of the original SWNTs (1.2?wt.?% at 12?bar, 77?K). Owing to its inherent conductivity and pore structure, as well as good dispersibility, SWNT-Zn is an effective candidate as a sensitive electrochemical stripping voltammetric sensor for organophosphate pesticides (OPs): By using solid-phase extraction (SPE) with SWNT-Zn-modified glassy carbon electrode, the detection limit of methyl parathion (MP) is 2.3?ng?mL(-1) .     

Effect of hydrocarbon structure of the headgroup on the thermodynamic properties of micellization of cationic gemini surfactants: an electrical conductivity study

A series of cationic gemini surfactants butanediyl-1,4-bis(dodecyldialkylammonium bromide), C(12)H(25)N(+)(C(m)H(2)(m)(+1))(2)C(4)H(8)N(+)(C(m)H(2)(m)(+1))(2)C(12)H(25)·2Br(-), where m=1, 2, 3, 4, referred to as C(12)C(4)C(12)(Me), C(12)C(4)C(12)(Et), C(12)C(4)C(12)(Pr), and C(12)C(4)C(12)(Bu), respectively, were synthesized, and their thermodynamic properties of micellization were studied by electrical conductivity measurements. There existed a minimum critical micelle concentration (cmc) in the curve of cmc versus temperature, and the temperature of the minimum of cmc (T(min)) increased with increasing the headgroup alkyl chain length. The values of log (cmc) depended linearly on carbon number of the alkyl chains, but that was not true for the carbon number of the headgroup substituents. The temperature dependence of cmc and degree of counterion association (β) were used to calculate the Gibbs free energy (Δ(mic)G°), enthalpies (Δ(mic)H°) and entropies (Δ(mic)S°) of micelle formation for these gemini surfactants, and well correlated enthalpy-entropy compensation was observed. The analyses showed C(12)C(4)C(12)(Me) and C(12)C(4)C(12)(Et) behaved similarly in terms of thermodynamics of micellization, but they behaved differently from C(12)C(4)C(12)(Pr) and C(12)C(4)C(12)(Bu), which could be ascribed to the hydrophobicity and the location of the headgroup alkyl chains in the aggregates. These initial results indicate the headgroup alkyl chain plays an important role in influencing the thermodynamic properties of gemini surfactants.     

Aryne [3 + 2] cycloaddition with N-sulfonylpyridinium imides and in situ generated N-sulfonylisoquinolinium imides: a potential route to pyrido[1,2-b]indazoles and indazolo[3,2-a]isoquinolines

The aryne [3 + 2] cycloaddition process with pyridinium imides breaks the aromaticity of the pyridine ring. By equipping the imide nitrogen with a sulfonyl group, the intermediate readily eliminates a sulfinate anion to restore the aromaticity, leading to the formation of pyrido[1,2-b]indazoles. The scope and limitation of this reaction are discussed. As an extension of this chemistry, N-tosylisoquinolinium imides, generated in situ from N'-(2-alkynylbenzylidene)-tosylhydrazides via an AgOTf-catalyzed 6-endo-dig electrophilic cyclization, readily undergo aryne [3 + 2] cycloaddition to afford indazolo[3,2-a]-isoquinolines in the same pot, offering a highly efficient route to these potential anticancer agents.     

Synthesis and photovoltaic properties of organic sensitizers incorporating a thieno[3,4-c]pyrrole-4,6-dione moiety

Novel organic sensitizers containing a thieno[3,4-c]pyrrole-4,6-dione (TPD) moiety with triphenylamine or julolidine as the electron donor have been designed and synthesized for quasi-solid-state dye-sensitized solar cells (DSSCs). For comparison, two organic dyes based on a terthiophene spacer have also been synthesized. The absorption, electrochemical and photovoltaic properties of all sensitizers have been systematically investigated. We found that the incorporation of TPD is highly beneficial to broaden the absorption spectra of the organic sensitizers and prevent the intermolecular interaction. Therefore, the charge recombination possibility is reduced, which is revealed by the controlled intensity modulated photovoltage spectroscopy. A quasi-solid-state DSSC based on sensitizer FNE38 with TPD and triphenylamine moieties demonstrates a solar energy conversion efficiency of 4.71% under standard AM 1.5G sunlight without the use of coadsorbant agents.     

Synthesis of symmetric 1,4-diamino-2-butynes via a Cu(I)-catalyzed one-pot A3-coupling/decarboxylative coupling of a propiolic acid, an aldehyde, and an amine

A novel microwave-assisted approach for the one-pot Cu(I)-catalyzed A(3)-coupling/decarboxylative coupling (PA(2)-coupling) of a propiolic acid, an aldehyde, and an amine, resulting in the formation of diversely substituted 1,4-diamino-2-butynes,is described. It is noteworthy that this new multicomponent coupling provides an efficient access to introduce alkyl and aryl group at the 1,4-position of the 1,4-diamino-2-butynes.     

Tunable helical assemblies of L-alanine methyl ester-containing polyphenylacetylene

The self-assemblying behaviors of L-alanine methyl ester-containing polyphenylacetylene (PPA-Ala, in Chart 1 ) were investigated upon the evaporation of its solvent on mica and on air/water interfaces. The introduction of chiral amino acid attachments to the polyphenylacetylene backbone induced a helical conformation of the backbone, which was stabilized by various noncovalent interactions, especially hydrophobic effect and hydrogen bonds. The helicity of the polymer was further amplified in its higher-order self-assemblies as the formation of helical fibers on the surface of mica upon natural evaporation of its THF solution. By LB technique, the polymer chains were guided to form ordered parallel ridges and highly aligned, with their helical conformation still remaining. The reorganization of the chiral polymer chains on air/water interface was associated with the additional hydrophobic effect of PPA-Ala on an air/water interface. The polymer backbones had to adopt different arrangements to minimize their contact with water, and this adjustment led to the formation of aligned polymer ridges under proper surface pressure.     

Transition metal surface passivation induced graphene edge reconstruction

In vacuum, the bare zigzag (zz) edge of graphene is reconstructed into a line of pentagon-heptagon pairs, while the pristine armchair (ac) edge is retained. Our first-principle explorations of graphene edges on three metal surfaces [Cu(111), Co(111), and Ni(111)] indicate an opposite tendency, that is, the pristine zz edge is energetically favorable and the reconstructed ac edge with dangling C atoms is highly stable on Co(111) and Ni(111) surfaces. Insightful analysis shows that passivation of the graphene edge by metal surfaces is responsible for the dramatic differences. Beyond this, the unique edge configuration has a significant impact on the graphene CVD growth behavior.     

Studies of iron(II) and iron(III) complexes with fac-N2O, cis-N2O2 and N2O3 donor ligands: models for the 2-His 1-carboxylate motif of non-heme iron monooxygenases

Enzymes in the oxygen-activating class of mononuclear non-heme iron oxygenases (MNOs) contain a highly conserved iron center facially ligated by two histidine nitrogen atoms and one carboxylate oxygen atom that leave one face of the metal center (three binding sites) open for coordination to cofactor, substrate, and/or dioxygen. A comparative family of [Fe(II/III)(N(2)O(n))(L)(4-n))](±x), n = 1-3, L = solvent or Cl(-), model complexes, based on a ligand series that supports a facially ligated N,N,O core that is then modified to contain either one or two additional carboxylate chelate arms, has been structurally and spectroscopically characterized. EPR studies demonstrate that the high-spin d(5) Fe(III)g = 4.3 signal becomes more symmetrical as the number of carboxylate ligands decreases across the series Fe(N(2)O(3)), Fe(N(2)O(2)), and Fe(N(2)O(1)), reflecting an increase in the E/D strain of these complexes as the number of exchangeable/solvent coordination sites increases, paralleling the enhanced distribution of electronic structures that contribute to the spectral line shape. The observed systematic variations in the Fe(II)-Fe(III) oxidation-reduction potentials illustrate the fundamental influence of differential carboxylate ligation. The trend towards lower reduction potential for the iron center across the [Fe(III)(N(2)O(1))Cl(3)](-), [Fe(III)(N(2)O(2))Cl(2)](-) and [Fe(III)(N(2)O(3))Cl](-) series is consistent with replacement of the chloride anions with the more strongly donating anionic O-donor carboxylate ligands that are expected to stabilize the oxidized ferric state. This electrochemical trend parallels the observed dioxygen sensitivity of the three ferrous complexes (Fe(II)(N(2)O(1)) < Fe(II)(N(2)O(2)) < Fe(II)(N(2)O(3))), which form μ-oxo bridged ferric species upon exposure to air or oxygen atom donor (OAD) molecules. The observed oxygen sensitivity is particularly interesting and discussed in the context of α-ketoglutarate-dependent MNO enzyme mechanisms.     

Optical Stark spectroscopy of the 2(0)(6) Ã1A'-X̃1A' band of chloro-methylene, HCCl

The laser induced fluorescence spectra of the 2(0)(6)A?(1)A(')-X?(1)A(') band of a rotationally cold (<20 K) molecular beam sample of chloro-methylene, HCCl, has been recorded, field-free and in the presence of a static electric field. The field-free spectrum has been analyzed to produce an improved set of spectroscopic parameters for the A?(1)A(') (060) vibronic state. The magnitude of the a-component of the permanent electric dipole moment, μ(a), for the X?(1)A(') (000) vibronic state has been determined to be 0.501(1) D from the analysis of the observed electric field induced shifts. Comparisons with theoretical predictions and flouro-methylene, HCF, are presented.     

Development of a sensitive liquid chromatography/tandem mass spectrometry method for the determination of fenofibric acid in rat plasma

A rapid and sensitive LC‐MS/MS method for the quantification of fenofibric acid in rat plasma was developed and validated. Plasma samples were prepared by liquid–liquid extraction with a mixture of N‐hexane–dichloromethane–isopropanol (100:50:5, v/v/v). Isocratic chromatographic separation was performed on a reversed‐phase Discovery C₁₈ column (2.1 × 50 mm, 5 µm). The mobile phase was methanol–water–formic (75:25:0.25, v/v/v). Detection of fenofibric acid and the internal standard (IS) diclofenac acid was achieved by ESI MS/MS in the negative ion mode using m/z 317 → m/z 213 and m/z 294 → m/z 250 transitions, respectively. The method was linear from 0.005 to 1.250 µg/mL when 100 μL plasma was analyzed. The lower limit of quantification was 0.005 µg/mL. The intra‐ and inter‐day precision values were below 8.2%, and accuracy ranged from ?0.9 to 2.1% in all quality control samples. The recovery was 90.3–94.7% and 83.3% for fenofibric acid and IS, respectively. Total run time for each sample analysis was 2.5 min. The validated method was successfully applied to a pharmacokinetic study in six rats after oral administration of fenofibrate, the ester prodrug of fenofibric acid (equivalent to fenofibric acid 5 mg/kg). The method permits laboratory scientists with access to the appropriate instrumentation to perform rapid fenofibric acid determination. Copyright © 2011 John Wiley & Sons, Ltd.