Extrudate swell behavior of PS and LLDPE melts in a dual die with mixed circular/slit flow channels in an extrusion rheometer

Extrudate swell behaviors of polystyrene (PS) and linear low‐density polyethylene (LLDPE) melts in a dual channel die, having mixed circular/slit flow channels, in a constant shear rate rheometer were examined. The extrudate swell ratio for PS melt was observed to be higher than that for LLDPE melt for all cases, this being associated with the differences in molecular structures that could be described in terms of power law indexes and secondary flows near the die entrance. In single channel die, the extrudate swell of both PS and LLDPE melts in circular flow channel die was greater than that in slit flow channel, whereas, in dual channel die the slit channel exhibited a higher extrudate swell ratio, the results being explained by revealing the flow patterns of the melt in the barrel and die of the rheometer. It was found that the dimensionless size of the vortex flows near the entrance, and the extent of disentanglement of molecular chains on entering the die were the important factors for the differences in the extrudate swell ratios of the melts at the die exit influenced by the die designs used. Copyright © 2003 John Wiley & Sons, Ltd.     

Catalysis by methyltrioxorhenium(VII): reduction of hydronium ions by europium(II) and reduction of perchlorate ions by europium(II) and chromium(II)

The title reactions occur stepwise, the first and fastest being MeReO3 + Eu2+ --> Re(VI) + Eu3+ (k298 = 2.7 x 10(4) L mol(-1) s(-1)), followed by rapid reduction of Re(VI) by Eu2+ to MeReO2. The latter species is reduced by a third Eu2+ to Re(IV), a metastable species characterized by an intense charge transfer band, epsilon410 = 910 L mol(-1) cm(-1) at pH 1; the rate constant for its formation is 61.3 L mol(-1) s(-1), independent of [H+]. Yet another reduction step occurs, during which hydrogen is evolved at a rate v = k[Re(IV)][Eu2+][H+](-1), with k = 2.56 s(-1) at mu = 0.33 mol L(-1). The 410 nm Re(IV) species bears no ionic charge on the basis of the kinetic salt effect. We attribute hydrogen evolution to a reaction between H-ReVO and H3O+, where the hydrido complex arises from the unimolecular rearrangement of Re(III)-OH in a reaction that cannot be detected directly. Chromium(II) ions do not evolve H2, despite E(Cr) degrees approximately E(EU) degrees. We attribute this lack of reactivity to the Re(IV) intermediate being captured as [Re(IV)-O-Cr(III)]2+, with both metals having substitutionally inert d3 electronic configurations. Hydrogen evolution occurs in chloride or triflate media; with perchlorate present, MeReO2 reduces perchlorate to chloride, as reported previously [Abu-Omar, M. M.; Espenson, J. H. Inorg. Chem. 1995, 34, 6239-6240].     

Electrochemical and surfaced-enhanced Raman spectroscopic investigation of CO and SCN- adsorbed on Au(core)-Pt(shell) nanoparticles supported on GC electrodes

Core-shell Au-Pt nanoparticles were synthesized by using a seed growth method and characterized by transmission electron microscopy, X-ray diffraction, and UV-vis spectroscopy. Au(core)-Pt(shell)/GC electrodes were prepared by drop-coating the nanoparticles on clean glassy carbon (GC) surfaces, and their electrochemical behavior in 0.5 M H2SO4 revealed that coating of the Au core by the Pt shell is complete. The electrooxidation of carbon monoxide and methanol on the Au(core)-Pt(shell)/GC was also examined, and the results are similar to those obtained on a bulk Pt electrode. High quality surface-enhanced Raman scattering (SERS) spectra of both adsorbed CO and thiocyanate were observed on the Au(core)-Pt(shell)/GC electrodes. The potential-dependent SERS features resemble those obtained on electrochemically roughened bulk Pt or Pt thin films deposited on roughened Au electrodes. For thiocyanate, the C-N stretching frequency increases with the applied potential, yielding two distinctly different dnu(CN)/dE. From -0.8 to -0.2 V, the dnu(CN)/dE is ca. 50 cm(-1)/V, whereas it is 90 cm(-1)/V above 0 V. The bandwidth along with the band intensity increases sharply above 0 V. At the low-frequency region, Pt-NCS stretching mode at 350 cm(-1) was observed at the potentials from -0.8 to 0 V, whereas the Pt-SCN mode at 280 cm(-1) was largely absent until around 0 V and became dominant at more positive potentials. These potential-dependent spectral transitions were attributed to the adsorption orientation switch from N-bound dominant at the negative potential region to S-bound at more positive potentials. The origin of the SERS activity of the particles is briefly discussed. The study demonstrates a new method of obtaining high quality SERS on Pt-group transition metals, with the possibility of tuning SERS activity by varying the core size and the shell thickness.     

Infrared (1.2-1.6 microm) luminescence in Cr4+:Yb3Al5O12 single crystal with 940 nm diode pumping

Infrared (1.2-1.6 microm) luminescence in a ytterbium aluminium garnet (YbAG) crystal, doped with Cr (0.05at.%) ions, was investigated under CW laser diode pumping (lambda=940 nm). The Cr4+ emission band was observed with its peak at 1.34 microm and measured to be about 1.3 times with respect to Yb3+ IR luminescence (lambda=1.03 microm). We demonstrate that for the excitation wavelength of 940 nm Yb3+ ions act as sensitizers of the 3B2(3T2)-3B1(3A2) emission of Cr4+ ions. This crystal is promising as a high-efficient system for tunable laser (1.2-1.6 microm) output.     

The Structure of Bis[N‐6‐aminopyridyl‐N‐(1S)‐(+)‐10‐camphorsulfonylamino]palladium in the Solid State and in Solution

The complex, bis[N‐6‐aminopyridyl‐N‐(1S)‐(+)‐10‐camphorsulfonylamino]palladium, Pd[(S)‐APCS]₂, 1 , was prepared by reaction of 2‐[(1S)‐(+)‐10‐camphorsulfonamino]‐6‐aminopyridine with PdCl₂ in THF. Complex 1 has been characterized by spectroscopic methods and its structure has been determined by X‐ray crystallography. Crystal data: space group C2, a= 16.082 (2), b = 17.104 (2), c = 13.051 (2)Å, β = 99.95 (1)°, V = 3535.9 (8) ų, Z = 2 with final residuals R1 = 0.0491 and wR2 = 0.0944. Two independent molecules, (S,S)‐Pd[(S)‐APCS]2, 1a , and (R,R)‐Pd[(S)‐APCS]2, 1b , were found in each asymmetric unit, which exchange to each other via a series of nitrogen inversion and C‐C bond rotation. The inversion energy (ΔGc₁^≠) and the energy barrier (δGc₂^≠) were 11.5 ± 0.1 Kcal mol^?1 at 246 K and 9.8 ± 0.1 Kcal mol^?1 at 199 K, respectively, calculated by dynamic NMR data.     

Synthesis of New Spiropyrans With a Polyaromatic or Heteroaromatic Pendant and Their Photochromic Bedhaviors

A series of spiropyrans with a polyaromatic or heteroaromatic pendant was synthesized conveniently.Their photochromic behaviors were investigated with the aid of absorption spectral measurements.The results indicated that the compounds with the same parent spiropyran but different aromatic pendant show significantly different photochromic properties.This may be due to the π-π orbital interaction between the polyaromatic pendant and the open photomerocyanine form of spiropyran.The results obtained are very useful in the molecule design area.     

Synthesis and properties of organosoluble poly(amide imide imide)s based on tetraimide dicarboxylic acid condensed from 4,4′‐(hexafluoroisopropylidene)diphthalic anhydride, 4,4′‐oxydianiline,and trimellitic anhydride and various aromatic diamines

A novel tetraimide dicarboxylic acid was synthesized with the ring‐opening addition of 4,4′‐(hexafluoroisopropylidene)diphthalic anhydride, 4,4′‐oxydianiline, and trimellitic anhydride in a 1/2/2 molar ratio in N‐methyl‐2‐pyrrolidone followed by azeotropic condensation to tetraimide dicarboxylic acid. A series of poly(amide imide imide)s (PAIIs) with inherent viscosities of 0.8–1.1 dL/g were prepared from tetraimide dicarboxylic acid with various aromatic diamines by direct polycondensation. Most of the PAIIs were readily soluble in a variety of amide polar solvents and even in less polar m‐cresol and pyridine. Solvent‐cast films had tensile strengths ranging from 99 to 106 MPa, elongations at break ranging from 8 to 13%, and initial moduli ranging from 2.0 to 2.3 GPa. The glass‐transition temperatures of these PAIIs were recorded at 244–276 °C. They had 10% weight losses at temperatures above 520 °C in air or nitrogen atmospheres. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 1092–1102, 2002     

Total Synthesis of (+)‐β‐Himachalene

An enantioselective synthesis of (+)‐β‐himachalene ( 2 ) was accomplished starting from (1S,2R)‐1,2‐epoxy‐p‐menth‐8‐ene ( 3 ) in 15 or 16 steps with an overall yield of ca. 6% (Schemes 3, 5, and 6). Key transformations include an Ireland–Claisen rearrangement, a Corey oxidative cyclization, and a ring expansion.     

Synthese und Charakterisierung neuer intramolekular stickstoffstabilisierter Organoaluminium‐ und Organogalliumalkoxide

Synthesis and Characterization of New Intramolecularly Nitrogen‐stabilized Organoaluminium‐ and Organogallium Alkoxides The intramolecularly nitrogen stabilized organoaluminium alkoxides [Me₂Al{μ‐O(CH₂)₃NMe₂}]₂ ( 1a ), Me₂AlOC₆H₂(CH₂NMe₂)₃‐2,4,6 ( 2a ), [(S)‐Me₂Al{μ‐OCH₂CH(i‐Pr)NH‐i‐Pr}]₂ ( 3a ) and [(S)‐Me₂Al{μ‐OCH₂CH(i‐Pr)NHCH₂Ph}]₂ ( 4 ) are formed by reacting equimolar amounts of AlMe₃ and Me₂N(CH₂)₃OH, C₆H₂[(CH₂NMe₂)₃‐2,4,6]OH, (S)‐i‐PrNHCH(i‐Pr)CH₂OH, or (S)‐PhCH₂NHCH(i‐Pr)CH₂OH, respectively. An excess of AlMe₃ reacts with Me₂N(CH₂)₂OH, Me₂N(CH₂)₃OH, C₆H₂[(CH₂NMe₂)₃‐2,4,6]OH, and (S)‐i‐PrNHCH(i‐Pr)CH₂OH producing the “pick‐a‐back” complexes [Me₂AlO(CH₂)₂NMe₂](AlMe₃) ( 5 ), [Me₂AlO(CH₂)₃NMe₂](AlMe₃) ( 1b ), [Me₂AlOC₆H₂(CH₂NMe₂)₃‐2,4,6](AlMe₃)₂ ( 2b ), and [(S)‐Me₂AlOCH₂CH(i‐Pr)NH‐i‐Pr](AlMe₃) ( 3b ), respectively. The mixed alkyl‐ or alkenylchloroaluminium alkoxides [Me(Cl)Al{μ‐O(CH₂)₂NMe₂}]₂ ( 6 ) and [{CH₂=C(CH₃)}(Cl)Al{μ‐O(CH₂)₂NMe₂}]₂ ( 8 ) are to obtain from Me₂AlCl and Me₂N(CH₂)₂OH and from [Cl₂Al{μ‐O(CH₂)₂NMe₂}]₂ ( 7 ) and CH₂=C(CH₃)MgBr, respectively. The analogous dimethylgallium alkoxides [Me₂Ga{μ‐O(CH₂)₃NMe₂}]₂ ( 9 ), [(S)‐Me₂Ga{μ‐OCH₂CH(i‐Pr)NH‐i‐Pr}]_n ( 10 ), [(S)‐Me₂Ga{μ‐OCH₂CH(i‐Pr)NHCH₂Ph}]_n ( 11 ), [(S)‐Me₂Ga{μ‐OCH₂CH(i‐Pr)N(Me)CH₂Ph}]_n ( 12 ) and [(S)‐Me₂Ga{μ‐OCH₂(C₄H₇NHCH₂Ph)}]_n ( 13 ) result from the equimolar reactions of GaMe₃ with the corresponding alcohols. The new compounds were characterized by elemental analyses, ¹H‐, ¹³C‐ and ²⁷Al‐NMR spectroscopy, and mass spectrometry. Additionally, the structures of 1a , 1b , 2a , 2b , 3a , 5 , 6 and 8 were determined by single crystal X‐ray diffraction.     

Electrochemically Enabled Intramolecular Aminooxygenation of Alkynes via Amidyl Radical Cyclization

An electrochemical synthesis of oxazol‐2‐ones and imidazol‐2‐ones has been developed via 5‐exo‐dig cyclization of propargylic carbamates‐ and ureas‐derived amidyl radicals. The electrosynthesis relies on the dual function of 2,2,6,6‐tetramethylpiperidin‐ 1‐yl)oxyl (TEMPO) as a redox mediator for amidyl radical formation and an oxygen atom donor. The reactions are conducted under mild conditions using a simple setup and provide convenient access to functionalized oxazol‐2‐ones and imidazol‐2‐ones from readily available materials.