Band structure studies on crystalline C60, Ca3C60, and Ca5C60

The three-dimensional EHMO crystal orbital calculations for crystalline C₆₀, Ca₃C₆₀, and Ca₅C₆₀ are reported. The ground states of both undoped solid C₆₀ and partially doped Ca₃C₆₀ are found to be insulating with an indirect energy gap of 1.2 and 0.5 eV, respectively. In contrast, Ca₅C₆₀ forms a metallic conducting phase with a set of three half-filled bands crossing the Fermi level, which is found to be located close to a peak of the density of state. The character of crystal orbitals near the Fermi level for both Ca₃C₆₀ and Ca₅C₆₀ is completely carbonlike. In both cases, the Ca atoms are almost fully ionized and C₆₀ molecules form a stable negative charge state with six to 10 additional electrons. © 1995 John Wiley & Sons, Inc.     

The Adsorption of NOx on Magnesium Aluminium Hydrotalcite

Magnesium aluminium hydrotalcite (Mg-Al-HT) with molar ratio of Mg-to-Al of 3 to 1 was prepared and characterized by X-ray diffraction (XRD) and infrared spectra (IR). The performances of Mg-Al-HT for the adsorption and desorption of NOx were studied. The results indicated that the adsorption capacity of the hydrotalcite for NOx was 1398.2mg/g, and it was higher than the acticarbon‘s. The adsorption capacities depended on adsorption time and temperature.Mg-Al-HT could be regenerated by thermal decomposition, and the adsorption efficiency had not changed markedly after three cycles.     

Kinetic investigation of the textile bleaching process

Volumetric H₂-uptake measurements on an Mo₂N (79 m²g^–1) sample reduced at 673 K have been carried out and the uptake isotherms in the temperature range of 308–623 K have been determined. Both the total and reversible hydrogen uptake increased with the uptake temperature. The irreversible hydrogen uptake increased abruptly when the uptake temperature was raised up to 423 K. The maximum of irreversible hydrogen uptake was measured at 473 K. The H_IR/Mo ratio calculated from the uptakes obtained in the temperature range of 308–623 K varies in the range of 0.0010–0.0202. One possible mechanism for hydrogen adsorption is proposed to be heterolytic dissociation on Mo-N paris, in which the molybdenum atoms are in unsaturated coordination.     

铁矿粉化学热加工中亚铁含量的测定

提出了一种铁矿粉热加工生产工艺中亚铁含量测定的新方法。在氮气保护下，用盐酸溶出样中的亚铁，在硫磷混酸介质中以重铬酸钾标准溶液滴定，并对溶样条件进行了研究。该方法简单、快速、准确，已成功地应用于氧化催化法生产氧化铁中亚铁的控制分析和成品鉴定。     

互通多孔碳/二氧化锰纳米复合材料的原位水热合成及电化学性能

以互通多孔碳（IPC）为载体，水热条件下在碳表面原位反应生成纳米结构的二氧化锰（MnO₂），制备互通多孔碳/二氧化锰纳米（IPC/MnO₂）复合电极材料. 采用扫描电镜（SEM），透射电镜（TEM），X射线衍射（XRD），热重分析（TGA）对其结构进行表征；采用循环伏安法、恒流充放电和交流阻抗对其电化学性能进行研究. 结果表明：生成的MnO₂均匀地负载在碳的表面，形成多层次结构，并且随着温度的升高IPC表面负载的MnO₂由纳米颗粒变为纳米片状结构；MnO₂纳米片具有典型的K-Birnessite 型晶体结构；复合物中MnO₂的含量约为34%（w）. 在100 ℃制备的IPC/MnO₂复合材料在三电极系统中最高比电容达到了411 F·g^-1；随着反应温度的升高,比容量先增长后基本保持不变. 以IPC/MnO₂为正极，活性炭（AC）为负极，1 mol·L^-1 Na₂SO₄溶液为电解液组装成IPC/MnO₂//AC 混合超级电容器，发现IPC/MnO₂电极的电容器其电位窗口从1 V扩展到1.8 V，容量可达86F·g^-1，且表现出良好的电容特性和大电流放电性能.     

The Self-catalytic Esterification Reaction of O-Phosphoryl Serine Derivative

O-Phosphoryl serine derivative can perform serf-catalytic esterification reaction in the mixture of CH3OH and CHCl3 at the room temperature. The phosphoryl group participation was the key step of the esterification. This type of reactions were proposed through an intermediate of mixed phosphoric-carboxylic anhydride that might provide a clue to the function of the phosphoryl group in the phosphorylated enzymes and in the prebiotic synthesis of protein.     

Micro-sized Sb2O3 octahedra fabricated via a PEG-1000 polymer-assisted hydrothermal route

The micro-sized Sb₂O₃ octahedra can be synthesized on a large scale via a simple PEG-1000 polymer-assisted hydrothermal route (PAHR) in the temperature range of 160-180 °C for 10-14 h. The structures, compositions, and morphologies of the as-synthesized products are derived from X-ray power diffraction pattern, X-ray photoelectron spectra, and field emission scanning electronic microscope. Meanwhile, the optical properties of the micro-sized Sb₂O₃ octahedra are studied by their photoluminescene spectroscopy and Raman spectrum. Furthermore, the possible growth mechanism of the micro-metered Sb₂O₃ octahedra is discussed on the basis of a series of supplementary experiments. And it has been found that PEG-1000, sodium tartrate, the reaction temperature, and the reaction time have considerable effects on the final morphology of Sb₂O₃, while the pH value has an influence on the formation of the Sb₂O₃ crystals.     

互通多孔碳/二氧化锰纳米复合材料的原位水热合成及电化学性能

以互通多孔碳（IPC）为载体，水热条件下在碳表面原位反应生成纳米结构的二氧化锰（MnO₂），制备互通多孔碳/二氧化锰纳米（IPC/MnO₂）复合电极材料. 采用扫描电镜（SEM），透射电镜（TEM），X射线衍射（XRD），热重分析（TGA）对其结构进行表征；采用循环伏安法、恒流充放电和交流阻抗对其电化学性能进行研究. 结果表明：生成的MnO₂均匀地负载在碳的表面，形成多层次结构，并且随着温度的升高IPC表面负载的MnO₂由纳米颗粒变为纳米片状结构；MnO₂纳米片具有典型的K-Birnessite 型晶体结构；复合物中MnO₂的含量约为34%（w）. 在100 ℃制备的IPC/MnO₂复合材料在三电极系统中最高比电容达到了411 F·g^-1；随着反应温度的升高,比容量先增长后基本保持不变. 以IPC/MnO₂为正极，活性炭（AC）为负极，1 mol·L^-1 Na₂SO₄溶液为电解液组装成IPC/MnO₂//AC 混合超级电容器，发现IPC/MnO₂电极的电容器其电位窗口从1 V扩展到1.8 V，容量可达86F·g^-1，且表现出良好的电容特性和大电流放电性能.     

互通多孔碳/二氧化锰纳米复合材料的原位水热合成及电化学性能

以互通多孔碳（IPC）为载体，水热条件下在碳表面原位反应生成纳米结构的二氧化锰（MnO₂），制备互通多孔碳/二氧化锰纳米（IPC/MnO₂）复合电极材料. 采用扫描电镜（SEM），透射电镜（TEM），X射线衍射（XRD），热重分析（TGA）对其结构进行表征；采用循环伏安法、恒流充放电和交流阻抗对其电化学性能进行研究. 结果表明：生成的MnO₂均匀地负载在碳的表面，形成多层次结构，并且随着温度的升高IPC表面负载的MnO₂由纳米颗粒变为纳米片状结构；MnO₂纳米片具有典型的K-Birnessite 型晶体结构；复合物中MnO₂的含量约为34%（w）. 在100 ℃制备的IPC/MnO₂复合材料在三电极系统中最高比电容达到了411 F·g^-1；随着反应温度的升高,比容量先增长后基本保持不变. 以IPC/MnO₂为正极，活性炭（AC）为负极，1 mol·L^-1 Na₂SO₄溶液为电解液组装成IPC/MnO₂//AC 混合超级电容器，发现IPC/MnO₂电极的电容器其电位窗口从1 V扩展到1.8 V，容量可达86F·g^-1，且表现出良好的电容特性和大电流放电性能.     

桑色素修饰碳糊电极吸附溶出伏安法测定人尿中痕量铅

制作了用桑色素作修饰剂的碳糊修饰电极 ,利用该电极为工作电极 ,建立了测定痕量铅的新方法。在甲酸钠 盐酸缓冲溶液 (pH 4 .9)中 ,在 - 0 .10V(vs .SCE)下搅拌富集 ,铅 (Ⅱ )与化学修饰碳糊电极表面的桑色素形成电活性络合物而吸附富集于电极表面 ,经 - 0 .85V(vs.SCE)静止还原后 ,阳极化线性扫描 ,在 - 0 .4 3V(vs .SCE)获得一灵敏的二次导数溶出峰。在最佳条件下分别富集 360s和 180s ,其二次导数峰电流与铅 (Ⅱ )浓度分别在 5 .0× 10 - 9～ 1.0× 10 - 7mol·L- 1和 2 0×10 - 8～ 1.0× 10 - 6 mol·L- 1两个范围内呈良好的线性关系 ,富集 6min ,检出限可达 1.0× 10 - 9mol·L- 1(S/N =3)。同时 ,探讨了电极反应机理。方法应用于尿铅测定 ,获得满意的结果