Kinetic investigation of the textile bleaching process

Volumetric H₂-uptake measurements on an Mo₂N (79 m²g^–1) sample reduced at 673 K have been carried out and the uptake isotherms in the temperature range of 308–623 K have been determined. Both the total and reversible hydrogen uptake increased with the uptake temperature. The irreversible hydrogen uptake increased abruptly when the uptake temperature was raised up to 423 K. The maximum of irreversible hydrogen uptake was measured at 473 K. The H_IR/Mo ratio calculated from the uptakes obtained in the temperature range of 308–623 K varies in the range of 0.0010–0.0202. One possible mechanism for hydrogen adsorption is proposed to be heterolytic dissociation on Mo-N paris, in which the molybdenum atoms are in unsaturated coordination.     

The research on the high quality TiO2, MoO3-doped WO3 electrochromic film

The high quality TiO2, MoO3-doped WO3 electrochromic film was prepared by the sol–gel method for the first time. The sol, which has hydrogen peroxide (H2O2) and oxalic acid (H2C2O4), was very stable at room temperature and quite suitable for the deposition of films. The WO3 electrochromic film prepared from this doped sol had excellent performance, such as short response time, no cracks, good adhesion to the substrate, high coloring efficiency and longevity of service.     

有机锗（Ge—132）对交警健康作用的研究

初步观察了给交警服用Ｇｅ－１３２的效果，表明Ｇｅ－１３２有一定保健作用。     

聚氯乙烯—丁腈橡胶—氯丁橡胶三元共混物的研究

测定了聚氯乙烯（ＰＶＣ）－丁脯橡胶（ＮＢＲ－２９）－氯丁橡胶（ＣＲ）三元共混物的冲击性能和应力－应变行为，用动态力分析、扫描电和透射电镜研究了共混物的相容性和形态结构。结果表明，ＮＢＲ－２９对ＰＶＣ，ＣＲ有良好的增容作用，三元共混物是部分相容的二相体系，具有良好的抗冲击性能。     

N—乙基—α—甲基—间（三氟甲基）苯乙胺的合成

本文报道了一种新的简便的合成Ｎ－乙基α－甲基－间苯乙胺的方法。方法以三氟甲苯为原料，经氯甲基化，Ｇｉｇｎａｒｄ及Ｌｅｕｃｋａｒｔ反应后得目标物，具有原料价廉易得，毒性较小，反应条件温和，工艺流程较短等特点。     

Parallel solution combustion synthesis for combinatorial materials studies

A parallel solution combustion synthesis technique was developed for combinatorial materials studies. The vigorous combustion reactions were successfully limited in the microreactors by using a substrate-net-mask microreactor system and the lowest adoptable furnace temperature. Using this technique, a luminescent materials library of Y3Al5O12/Tb(chi) was synthesized with the aid of an ink-jet delivery system. Structure and luminescence characterizations were implemented using X-ray diffraction and UV/X-ray spectroscopies, respectively. The results show that this technique is reliable and applicable to combinatorial study of powder materials with high synthesis temperature.     

二氧化碳同环氧丙烷交替共聚用催化剂的研究

探讨了有机金属催化剂的组成及其对二氧化碳同环氧丙烷交替共聚产物结构的影响,发现二乙基锌—助剂体系的催化活性按如次顺序递降:二乙基锌—连苯三酚>二乙基锌—间苯二酚>二乙基锌—对苯二胺>二乙基锌—亚乙基脲。若用三异丁基铝代替二乙基锌同连苯三酚构成催化剂,则失去对二氧化碳同环氧丙烷交替共聚反应的活性同时,著者发现二乙基锌—二元芳胺催化体系与二乙基锌—二元酚催化体系的催化活性规律完全不同。     

互通多孔碳/二氧化锰纳米复合材料的原位水热合成及电化学性能

以互通多孔碳（IPC）为载体，水热条件下在碳表面原位反应生成纳米结构的二氧化锰（MnO₂），制备互通多孔碳/二氧化锰纳米（IPC/MnO₂）复合电极材料. 采用扫描电镜（SEM），透射电镜（TEM），X射线衍射（XRD），热重分析（TGA）对其结构进行表征；采用循环伏安法、恒流充放电和交流阻抗对其电化学性能进行研究. 结果表明：生成的MnO₂均匀地负载在碳的表面，形成多层次结构，并且随着温度的升高IPC表面负载的MnO₂由纳米颗粒变为纳米片状结构；MnO₂纳米片具有典型的K-Birnessite 型晶体结构；复合物中MnO₂的含量约为34%（w）. 在100 ℃制备的IPC/MnO₂复合材料在三电极系统中最高比电容达到了411 F·g^-1；随着反应温度的升高,比容量先增长后基本保持不变. 以IPC/MnO₂为正极，活性炭（AC）为负极，1 mol·L^-1 Na₂SO₄溶液为电解液组装成IPC/MnO₂//AC 混合超级电容器，发现IPC/MnO₂电极的电容器其电位窗口从1 V扩展到1.8 V，容量可达86F·g^-1，且表现出良好的电容特性和大电流放电性能.     

First principles study of small palladium cluster growth and isomerization

Structures and physical properties of small palladium clusters Pd_n up to n = 15 and several selected larger clusters were studied using density functional theory under the generalized gradient approximation. It was found that small Pd_n clusters begin to grow 3‐dimensionally at n = 4 and evolve into symmetric geometric configurations, such as icosahedral and fcc‐like, near n = 15. Several isomers with nearly degenerate average binding energies were found to coexist and the physical properties of these clusters were calculated. For several selected isomers, relatively moderate energy barriers for structural interchange for a given cluster size were found, implying that isomerization could readily occur under ambient conditions. © 2007 Wiley Periodicals, Inc. Int J Quantum Chem, 2007     

Anodic oxidation of hydrazine at carbon nanotube powder microelectrode and its detection

Carbon nanotube powder microelectrodes (CNTPMEs) were used to study the anodic oxidation of hydrazine at Carbon nanotube (CNT)-the novel carbon material. It was found that the electrochemical behaviours were greatly improved at CNTs, indicating that the anodic oxidation could be catalyzed at CNTs. The kinetics parameters of this process were calculated, the heterogeneous electron transfer rate constant k was 0.0019 cm s(-1), (1-alpha)n(alpha) was 0.22. The CNTPMEs were also found with high sensitivity for hydrazine detection, could be used as hydrazine sensors.