Evaluation of Phoma sp. Biomass as an Endophytic Fungus for Synthesis of Extracellular Gold Nanoparticles with Antibacterial and Antifungal Properties

The aim of our study was to examine the different concentrations of AuNPs as a new antimicrobial substance to control the pathogenic activity. The extracellular synthesis of AuNPs performed by using Phoma sp. as an endophytic fungus. Endophytic fungus was isolated from vascular tissue of peach trees (Prunus persica) from Baft, located in Kerman province, Iran. The UltraViolet-Visible Spectroscopy (UV–Vis spectroscopy) and Fourier transform infrared spectroscopy provided the absorbance peak at 526 nm, while the X-ray diffraction and transmission electron microscopy images released the formation of spherical AuNPs with sizes in the range of 10–100 nm. The findings of inhibition zone test of Au nanoparticles (AuNPs) showed a desirable antifungal and antibacterial activity against phytopathogens including Rhizoctonia solani AG1-IA (AG1-IA has been identified as the dominant anastomosis group) and Xanthomonas oryzae pv. oryzae. The highest inhibition level against sclerotia formation was 93% for AuNPs at a concentration of 80 μg/mL. Application of endophytic fungus biomass for synthesis of AuNPs is relatively inexpensive, single step and environmentally friendly. In vitro study of the antifungal activity of AuNPs at concentrations of 10, 20, 40 and 80 μg/mL was conducted against rice fungal pathogen R. solani to reduce sclerotia formation. The experimental data revealed that the Inhibition rate (RH) for sclerotia formation was (15, 33, 74 and 93%), respectively, for their corresponding AuNPs concentrations (10, 20, 40 and 80 μg/mL). Our findings obviously indicated that the RH strongly depend on AuNPs rates, and enhance upon an increase in AuNPs rates. The application of endophytic fungi biomass for green synthesis is our future goal.     

A comparison on efficiency of virgin and sulfurized agro-based adsorbents for mercury removal from aqueous systems

Mercury adsorption by sulfur impregnated adsorbents seems to be one of the most efficient ways for removal of this toxic metal ion from wastewater and atmosphere. The aim of this work was to develop a method for preparation of low-cost sulfurized adsorbent from agricultural wastes; this approach combines two stages of (i) chemical activation with phosphoric acid and (ii) impregnation with powdered sulfur, in one step only. The physico-chemical properties of sulfurized adsorbent (AC-S) were determined with BET, FT-IR, Eschka method and pH_PZC measurements, and compared with those of the virgin sample (AC). It was found that sulfurization according to this method can introduce about 8 wt.% sulfur into the structure of adsorbent, in the forms of C–S, S–H, S–S and S=O functional groups. Although during the sulfur introduction processes, a decrease in surface area and micropore volume of the sulfurized adsorbent is to be expected, not only such decrease did not occur in this work, but a large increase in microporosity was seen. Thereupon, both the sulfur functionalities and extended microporosity of AC-S lead to higher capability of this sample for mercury adsorption rather than AC. Finally, the kinetics and equilibrium of mercury adsorption from aqueous solutions were studied for AC and AC-S.     

Cu1.5PMo12O40 as an efficient, mild and heterogeneous catalyst for the condensation of indole with carbonyl compounds

Bis(indoyl)methanes have been synthesized in excellent yields in the presence of catalytic amount of Cu_1.5PMo₁₂O₄₀ in molten tetraethylammonium chloride as an ionic liquid. The catalyst is recovered and recycled.     

Numerical analysis and computational testing of a high accuracy Leray‐deconvolution model of turbulence

We study a computationally attractive algorithm (based on an extrapolated Crank‐Nicolson method) for a recently proposed family of high accuracy turbulence models, the Leray‐deconvolution family. First we prove convergence of the algorithm to the solution of the Navier‐Stokes equations and delineate its (optimal) accuracy. Numerical experiments are presented which confirm the convergence theory. Our 3d experiments also give a careful comparison of various related approaches. They show the combination of the Leray‐deconvolution regularization with the extrapolated Crank‐Nicolson method can be more accurate at higher Reynolds number that the classical extrapolated trapezoidal method of Baker (Report, Harvard University, 1976). We also show the higher order Leray‐deconvolution models (e.g. N = 1,2,3) have greater accuracy than the N = 0 case of the Leray‐α model. Numerical experiments for the 2d step problem are also successfully investigated. Around the critical Reynolds number, the low order models inhibit vortex shedding behind the step. The higher order models, correctly, do not. To estimate the complexity of using Leray‐deconvolution models for turbulent flow simulations we estimate the models' microscale.© 2007 Wiley Periodicals, Inc. Numer Methods Partial Differential Eq, 2008     

The effect of the chemical composition and the volume of coated carbonate calcium on epoxy paint properties

Russian Journal of Applied Chemistry - Titanium dioxide (TiO2) is widely used in the paint industry as a white pigment. To reduce the high cost of TiO2, mineral fillers such as different calcites...     

Microwave‐Assisted Catalyst Free Three Component Synthesis of Mono and Bis Spiro Pyrazolopyridines in Solvent Free Reaction

Multicomponent synthesis of mono and bis‐spiro pyrazolopyridines from isatin derivatives, indanedione, and 3‐methyl‐5‐aminopyrazole under microwave irradiation in the absence of any catalyst or solvent with high yield and short reaction time is reported.     

Synthesis of new dyes containing double tetrazole groups for sensitization of TiO<Subscript>2</Subscript> nanoparticles in dye-sensitized solar cells

Di(1H-tetrazol-5-yl)methane is employed as a new electron acceptor group in the synthesis of two metal-free organic dyes containing triphenylamine donor group. Dye-sensitized nanocrystalline TiO₂ solar cell (DSSC) applying these novel dyes is constructed for consideration of their photovoltaic properties. The electronic properties of the dyes are also considered with the aid of theoretical calculations. The DSSC constructed from 4-(2,2-di(1H-tetrazol-5-yl)vinyl)-N,N-diphenylaniline (T1) shows a short-circuit photocurrent density of 13.38 mA cm^?2, an open circuit voltage of 578 mV, and a fill factor of 0.54, with a resulted solar energy-to-electricity conversion efficiency of 4.18% under simulated 1 sun irradiation (100 mW cm^?2). This result reveals that the dye with the di(1H-tetrazol-5-yl)methane anchoring group injects more electrons to the conduction band of TiO₂ in comparison with its analogs with single tetrazole ring in their anchoring group. It is found that in spite of a red-shift of the absorption spectrum resulted from the lengthening of the molecule, the dye with two di(1H-tetrazol-5-yl)methane groups gives lower performance than the dye with a single electron acceptor.     

Phenethyl Ester of Gallic Acid Ameliorates Experimental Autoimmune Encephalomyelitis

Gallic acid is a phenolic acid present in various plants, nuts, and fruits. It is well known for its anti-oxidative and anti-inflammatory properties. The phenethyl ester of gallic acid (PEGA) was synthesized with the aim of increasing the bioavailability of gallic acid, and thus its pharmacological potential. Here, the effects of PEGA on encephalitogenic cells were examined, and PEGA was found to modulate the inflammatory activities of T cells and macrophages/microglia. Specifically, PEGA reduced the release of interleukin (IL)-17 and interferon (IFN)-γ from T cells, as well as NO, and IL-6 from macrophages/microglia. Importantly, PEGA ameliorated experimental autoimmune encephalomyelitis, an animal model of chronic inflammatory disease of the central nervous system (CNS)—multiple sclerosis. Thus, PEGA is a potent anti-inflammatory compound with a perspective to be further explored in the context of CNS autoimmunity and other chronic inflammatory disorders.