Monitoring of NO2 in the ambient air with passive samplers before and after a road reconstruction event

Nitrogen dioxide (NO₂) concentrations were used to evaluate the air quality before and after the infrastructural change of an important traffic artery in Mortsel, Antwerp (Belgium). During the reconstruction works two pairs of traffic lanes were reduced to one in each direction. Two sampling campaigns were conducted: the first one before the works in 2003 and the second one in 2005, after the road works were finished. Sampling was performed on a weekly base with the use of passive diffusion tubes on the streets, and also indoors in nearby houses. The samples were analyzed by ion chromatography, from which data the NO₂ concentrations in air could be calculated. These results were compared with NO₂ values from the air monitoring station 42R801 of the Flemish Environment Agency in Borgerhout, Antwerp. On the base of different NO₂ concentrations, correlated well with the traffic density, sampling locations were classified into three groups as follows: 1) ‘heavily polluted’ (heavy traffic); 2) ‘moderately polluted’ (medium traffic); or 3) ‘less polluted’ (low traffic density). Sampling sites located further from the road works, enclosed to the group ‘less polluted’, showed the lowest NO₂ concentrations. The highest NO₂ level was found for the locations close to reconstruction works, which belonged to the group ‘heavily polluted’. The contribution of NO₂ was at the same level before and after the road works. During the first campaign it ranged from 30 ± 7 µg/m³ to 71 ± 11 µg/m³ and during the second sampling it was between 36 ± 17 µg/m³ and 73 ± 17 µg/m³. These modernization works had no impact on preventing the traffic-related pollutant as NO₂ and as a consequence no significant effect on the air quality in the studied region. It has been proven that the impact of traffic on the air quality is unmistakably high and simply reduction of the number of the traffic lanes, intended to discourage the traffic flow, had apparently no environmentally advantageous effect.     

Spectroscopic characterization of molybdenum dinitrogen complexes containing a combination of di- and triphosphine coligands: 31P NMR analysis of five-spin systems

The three molybdenum-N2 complexes [Mo(N2)(dpepp)(depe)] (1), [Mo(N2)(dpepp)(dppe)] (2), and [Mo(N2)(dpepp)(1,2-dppp)] (3), all of which contain a combination of a bi- and a tridentate phosphine ligand, were prepared and investigated by vibrational and (31)P NMR spectroscopy. As a tridentate ligand bis(2-diphenylphosphinoethyl)phenylphosphine (dpepp) has been employed. The three different bidentate ligands are 1,2-bis(diethylphosphino)ethane (depe), 1,2-bis(diphenylphosphino)ethane (dppe), and R-(+)-1,2-bis(diphenylphosphino)propane (1,2-dppp). N-N as well as metal-N vibrations of 1-3 are identified and interpreted in terms of the geometric and electronic structures of the complexes. (31)P NMR spectra are recorded and fully analyzed. Moreover, correlation spectroscopy (COSY)-45 measurements are performed to determine the relative signs of coupling constants. Special attention is directed to a detection of different isomers and their (31)P NMR, as well as vibrational spectroscopic properties. The implications of the results for the area of synthetic nitrogen fixation with phosphine complexes are discussed.     

Pd(II) phthalocyanine-sensitized triplet-triplet annihilation from rubrene

Upconverted yellow singlet fluorescence from rubrene (5,6,11,12-tetraphenylnapthacene) was generated from selective excitation (lambdaex = 725 nm) of the red light absorbing triplet sensitizer palladium(II) octabutoxyphthalocyanine, PdPc(OBu)8, in vacuum degassed toluene solutions using a Nd:YAG/OPO laser system in concert with gated iCCD detection. The data are consistent with upconversion proceeding from triplet-triplet annihilation (TTA) of rubrene acceptor molecules. The TTA process was confirmed by the quadratic dependence of the upconverted delayed fluorescence intensity with respect to incident light, measured by integrating the corresponding kinetic traces as a function of the incident excitation power. In vacuum degassed toluene solutions, the red-to-yellow upconversion process is stable under continuous long wavelength irradiation and is readily visualized by the naked eye even at modest laser fluence (0.6 mJ/pulse). In aerated solutions, however, selective excitation of the phthalocyanine sensitizer leads to rapid decomposition of rubrene into its corresponding endoperoxide as evidenced by UV-vis (in toluene), 1H NMR (in d6-benzene), and MALDI-TOF mass spectrometry, consistent with the established reactivity of rubrene with singlet dioxygen. The upconversion process in this triplet sensitizer/acceptor-annihilator combination was preliminarily investigated in solid polymer films composed of a 50:50 mixture of an ethyleneoxide/epichlorohydrin copolymer, P(EO/EP). Films that were prepared under an argon atmosphere and maintained under this inert environment successfully achieve the anticipated quadratic incident power dependence, whereas air exposure causes the film to deviate somewhat from this dependence. To the best of our knowledge, the current study represents the first example of photon upconversion using a phthalocyanine triplet sensitizer, furthering the notion that anti-Stokes light-producing sensitized TTA appears to be a general phenomenon as long as proper energy criteria are met.     

Excited-state absorption properties of platinum(II) terpyridyl acetylides

A comprehensive photophysical study is presented which compares the ground- and excited-state properties of four platinum(II) terpyridyl acetylide compounds of the general formula [Pt(tBu3tpy)(CCR)]+, where tBu3tpy is 4,4',4' '-tri-tert-butyl-2,2':6',2' '-terpyridine and R is an alkyl or aryl group. [Ru(tBu3tpy)3]2+ and the pivotal synthetic precursor [Pt(tBu3tpy)Cl]+ were also investigated in the current work. The latter two complexes possess short excited-state lifetimes and were investigated using ultrafast spectrometry while the other four compounds were evaluated using conventional nanosecond transient-absorption spectroscopy. The original intention of this study was to comprehend the nature of the impressive excited-state absorptions that emanate from this class of transition-metal chromophores. Transient-absorbance-difference spectra across the series contain the same salient features, which are modulated only slightly in wavelength and markedly in intensity as a function of the appended acetylide ligand. More intense absorption transients are observed in the arylacetylide structures relative to those bearing an alkylacetylide, consistent with transitions coupled to the pi system of the ancillary ligand. Reductive spectroelectrochemical measurements successfully generated the electronic spectrum of the tBu3tpy radical anion in all six complexes at room temperature. These measurements confirm that electronic absorptions associated with the tBu3tpy radical anion simply do not account for the intense optical transitions observed in the excited state of the Pt(II) chromophores. Transient-trapping experiments using the spectroscopically silent reductive quencher DABCO clearly demonstrate the loss of most transient-absorption features in the acetylide complexes throughout the UV, visible, and near-IR regions following bimolecular excited-state electron transfer, suggesting that these features are strongly tied to the photogenerated hole which is delocalized across the Pt center and the ancillary acetylide ligand.     

Elemental distribution and thermoelectric properties of layered tellurides 39R-M(0.067)Sb(0.667)Te(0.266) (M=Ge, Sn)

The isostructural phases 39R‐Ge_0.067Sb_0.667Te_0.266 (R$\bar 3The isostructural phases 39R-Ge(0.067)Sb(0.667)Te(0.266) (R3m, a=4.2649(1), c=75.061(2) ?) and 39R-Sn(0.067)Sb(0.667)Te(0.266) (R3m, a=4.2959(1), c=75.392(2) ?) were prepared by quenching stoichiometric melts of the pure elements and subsequent annealing at moderate temperatures. Their structures are comparable to "superlattices" synthesized by layer-by-layer deposition onto a substrate. These structures show no stacking disorder by electron microscopy. The structure of the metastable layered phases are similar to that of 39R-Sb(10)Te(3) (equivalent to Sb(0.769)Te(0.231)), which contains four A7 gray-arsenic-type layers of antimony alternating with Sb(2)Te(3) slabs. Joint refinements on single-crystal diffraction data using synchrotron radiation at several K edges were performed to enhance the scattering contrast. These refinements show that the elemental distributions at some atom positions are disordered whereas otherwise the structures are long-range ordered. The variation of the elemental concentration correlates with the variation in interatomic distance. Z-contrast scanning transmission electron microscopy (HAADF-STEM) on 39R-Ge(0.067)Sb(0.667)Te(0.266) confirms the presence of concentration gradients. The carrier-type of the isostructural metal (A7-type lamellae)-semiconductor heterostructures (Ge/Sn-doped Sb(2)Te(3) slabs) varies from n-type (Ge(0.067)Sb(0.667)Te(0.266)) to p-type (Sn(0.067)Sb(0.667)Te(0.266)). Although the absolute values of the Seebeck coefficient reached about 50-70 μV/K and the electrical conductivity is relatively high, the two isotypic phases exhibit a maximal thermoelectric figure of merit (ZT) of 0.06 at 400 °C as their thermal conductivity (κ≈8-9.5 W/mK at 400 °C) lies interestingly in between that of antimony and pure Sb(2)Te(3).     

Phenanthrene-fused azo-ene-ynes: synthesis of dibenzo[f,h]cinnoline and dibenzo[e,g]isoindazole derivatives

The cyclization reactions of a phenanthreno-fused azo-ene-yne compound have been studied both experimentally and computationally. Experimental results show that this system is prone to dimerization, more so than previously studied naphthalene- and benzene-based analogues. Calculations reveal that pyrazoles and arene-fused pyrazoles strongly stabilize carbenes in the 5-position through "coarctate conjugation", suggesting a stationary concentration of the carbenes/carbenoids during cyclization that is high enough for dimerization.     

New Homoleptic Rare‐Earth Metal Complexes Comprising the Unsymmetrically Substituted Amidinate Ligand [MeC(NEt)(NtBu)]–

New homoleptic complexes of selected rare‐earth elements containing the unsymmetrically substituted amidinate ligand [MeC(NEt)(NtBu)]^– [= (L)^–] were synthesized and fully characterized. Treatment of in situ‐prepared Li(L) ( 1 ) with anhydrous lanthanide(III) chlorides, LnCl₃ (Ln = Sc, La, Ce, Ho), afforded three different types of amidinate complexes depending on the ionic radius of the central metal atom. The large La³⁺ formed the octa‐coordinate DME solvate La(L)₃(DME) ( 2 ). Using Ce³⁺, the octa‐coordinate “ate” complex Li(THF)[Ce(L)₄] ( 3 ) was formed. Depending on the crystallization conditions, compound 3 could be crystallized in two modifications differing in the coordination environment around Li. In the case of the smaller Sc³⁺ and Ho³⁺ ions, six‐coordinate homoleptic Sc(L)₃ ( 4 ) and Ho(L)₃ ( 5 ) were isolated. The title compounds were fully characterized by spectroscopic and analytical methods as well as single‐crystal X‐ray diffraction. With Ln = La and Ce, several by‐products incorporating lithium, chlorine and/or oxygen were also isolated and structurally characterized.     

What is the role of acid–acid interactions in asymmetric phosphoric acid organocatalysis? A detailed mechanistic study using interlocked and non-interlocked catalysts

Organocatalysis has revolutionized asymmetric synthesis. However, the supramolecular interactions of organocatalysts in solution are often neglected, although the formation of catalyst aggregates can have a strong impact on the catalytic reaction. For phosphoric acid based organocatalysts, we have now established that catalyst–catalyst interactions can be suppressed by using macrocyclic catalysts, which react predominantly in a monomeric fashion, while they can be favored by integration into a bifunctional catenane, which reacts mainly as phosphoric acid dimers. For acyclic phosphoric acids, we found a strongly concentration dependent behavior, involving both monomeric and dimeric catalytic pathways. Based on a detailed experimental analysis, DFT-calculations and direct NMR-based observation of the catalyst aggregates, we could demonstrate that intermolecular acid–acid interactions have a drastic influence on the reaction rate and stereoselectivity of asymmetric transfer-hydrogenation catalyzed by chiral phosphoric acids.

Supramolecular acid–acid interactions lead to competing monomeric and dimeric pathways in phosphoric acid catalysis – so that stereoselectivities depend on catalyst concentration.     

Chalcogen–chalcogen-bond activation by an ambiphilic,doubly reduced organoborane

The 9,10-dimethyl-9,10-dihydro-9,10-diboraanthracene dianion salt Li₂[1] instantaneously reacts with the dichalcogens O₂(tBu)₂, S₂Me₂, S₂(pTol)₂, Se₂Ph₂, and Te₂Ph₂ under reductive cleavage of the chalcogen–chalcogen bonds to give lithium chalcogenides and neutral 1. In solution, the products are involved in rapid association/dissociation equilibria. In the crystalline state, 1 and Li[O(tBu)] form a diadduct, whereas Li[SMe] gives a B?B-bridged monoadduct. In the three remaining cases, the crystal lattices contain monoadducts of 1 with one tri- and one tetracoordinate boron atom.