Thermo‐oxidative degradation of HDPE as a function of its crystalline content

The composition, the thermal properties, and the kinetics of the thermo‐oxidative degradation of high‐density polyethylene (HDPE) were studied as a function of the increasing crystalline fraction, which resulted from the selective extraction of the amorphous part, through digestion by immersion in fuming nitric acid (HNO₃) for different periods of time. The chemical and thermodynamic changes in HDPE, brought about by digestion in nitric acid for different periods of time, are discussed. Changes in the chemistry and microstructure of the HDPE, as a function of acid treatment for different periods of time, were studied using infra‐red spectroscopy (FTIR), gel permeation chromatography (GPC), and thermal analysis (DSC and TGA), as well as scanning electron microscopy (SEM). These studies were carried out as a function of the extracted amorphous fraction of HDPE samples via digestion in HNO₃. These studies showed that in the first stages of the acid chemical attack, the amorphous part first undergoes a chemical modification and then dissolves into the strong acid medium. The total crystalline fraction apparently decreases during the first stages of the chemical attack and then increases as the amorphous part is extracted. TGA results show that as the selective extraction of the amorphous part occurs, there is a displacement of the thermo‐oxidative degradation toward higher temperatures. The kinetics of the thermo‐oxidative degradation as a function of the extraction of the amorphous part was followed according to the Horowitz‐Metzger method, and it was found that as the concentration of the crystalline fraction increases, the activation energy for the thermo‐oxidative degradation increases. SEM studies show that the extraction of the amorphous part does not affect the size of the crystalline lamellar thickness of HDPE. © 2009 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 47: 1906–1915, 2009     

Quantum electronic transport: Linear and nonlinear conductance from the Keldysh approach

This is a review of the derivation of the Landauer conductance using the Keldysh non-equilibrium Green's function (NEGF) formalism and the equations-of-motion (EOM) method. We consider the elastic quantum electronic transport through a multi-lead device and treat the conductor in the mean-field approximation. This is suitable for open quantum dots as well as for several molecular systems where charging effects are negligible. The focus of the presentation is to unveil the technical issues involved in the formalism. We show how the Landauer conductance emerges as a linear term in the current-voltage I-V characteristics and indicate how to go beyond this regime. We address the connection of the NEGF approach to recent developments in molecular transport and discuss the problems that arise when one tries to include interaction effects beyond the mean field.     

4-Trichloroacetyl-1,2,3-triazoles: A versatile building block for rapid assessment of carbohydrazides and rufinamide derivatives

This work reports the synthesis of a series of (1H-1,2,3-triazol-4-yl)carbohydrazides (2), which were obtained from 4-trichloroacetyl-1H-1,2,3-triazoles (1). Triazoles 1 were synthesized by 1,3-dipolar cycloaddition reaction, starting from 4-alkoxy-1,1,1-trichloroalk-3-en-2-ones and benzyl azides and easily (15 min) converted to 2 by reaction with hydrazine hydrate (73–82% yield). Carbohydrazides 2 proved to be a versatile building block for constructing a series of fluorinated heterocycles analogous to rufinamide, i.e., 1H-1,2,3-triazol-4-yl-1,3,4-oxadiazoles, a pyrrole derivative, and a 2-pyrazoline, through [4+1]–, [1+4]–, and [3+2]–cyclocondensation reactions, respectively. Finally, and according to the Lipinski’s rule of five, 2,6-difluorobenzylated 1,2,3-triazoles can be considered as potential candidates for further biological activity assays.     

Addition of Surfactants and Non-Hydrolytic Proteins and Their Influence on Enzymatic Hydrolysis of Pretreated Sugarcane Bagasse

Poly(ethylene glycol) (PEG 4000) and bovine serum albumin (BSA) were investigated with the purpose of evaluating their influence on enzymatic hydrolysis of sugarcane bagasse. Effects of these supplements were assayed for different enzymatic cocktails (Trichoderma harzianum and Penicillium funiculosum) that acted on lignocellulosic material submitted to different pretreatment methods with varying solid (25 and 100 g/L) and protein (7.5 and 20 mg/g cellulose) loadings. The highest levels of glucose release were achieved using partially delignified cellulignin as substrate, along with the T. harzianum cocktail: increases of 14 and 18 % for 25 g/L solid loadings and of 33 and 43 % for 100 g/L solid loadings were reached for BSA and PEG supplementation, respectively. Addition of these supplements could maintain hydrolysis yield even for higher solid loadings, but for higher enzymatic cocktail protein loadings, increases in glucose release were not observed. Results indicate that synergism might occur among these additives and cellulase and xylanases. The use of these supplements, besides depending on factors such as pretreatment method of sugarcane bagasse, enzymatic cocktails composition, and solid and protein loadings, may not always lead to positive effects on the hydrolysis of lignocellulosic material, making it necessary further statistical studies, according to process conditions.     

Synthesis,crystal structure and magnetic properties of the helical oxalate-bridged copper(II) chain {[(CH3)4N]2[Cu(C2O4)2] · H2O}n

The preparation, crystal structure and magnetic properties of a new oxalate-containing copper(II) chain of formula {[(CH₃)₄N]₂[Cu(C₂O₄)₂] · H₂O}_n (1) [(CH₃)₄N⁺ = tetramethylammonium cation] are reported. The structure of 1 consists of anionic oxalate-bridged copper(II) chains, tetramethylammoniun cations and crystallization water molecules. Each copper(II) ion in 1 is surrounded by three oxalate ligands, one being bidentate and the other two exhibiting bis-bidenate coordination modes. Although all the tris-chelated copper(II) units from a given chain exhibit the same helicity, adjacent chains have opposite helicities and then an achiral structure results. Variable-temperature magnetic susceptibility measurements of 1 show the occurrence of a weak ferromagnetic interaction through the oxalate bridge [J = +1.14(1) cm⁻¹, the Hamiltonian being defined as H = –J ∑_nmS_i · S_j]. This value is analyzed and discussed in the light of available magneto-structural data for oxalate-bridged copper(II) complexes with the same out-of-plane exchange pathway.     

Colour diversification in octocorals based on conjugated polyenes: A Raman spectroscopic view

Polyenic pigments in octocorals have been investigated by Raman spectroscopy using laser excitation at 532, 785 and 1064 nm. The spectral features suggest the structural nature of carotenoids from Phyllogorgia dilatata, Leptogorgia punicea, Muricea atlantica, Carijoa riisei and conjugated polyenals from L. punicea, L. setacea, Muricea flamma and Renilla muelleri. The observed vibrational bands at ca. 1540–1520 ν₁(C=C), 1159 ν₂(C–C) and 1005 cm⁻¹ ρ₃(C–CH₃) were assigned to carotenoids, whereas the identification of non‐methylated conjugated polyenals have been proposed due to two major Raman bands at ca. 1500 and 1120 cm^‐1, assigned to ν(C=C) and ν(C–C), respectively. Copyright © 2012 John Wiley & Sons, Ltd.     

Hydrogen bonding in 2‐(2‐oxothiazolidin‐3‐yl)‐4,5‐dihydrothiazolium hydrogen sulfate monohydrate

The asymmetric unit of the title compound, C₆H₉N₂OS₂⁺·HSO₄⁻·H₂O, contains a heterocyclic cation, a hydrogen sulfate anion and a water molecule. There are strong hydrogen bonds between the hydrogen sulfate anions and water molecules, forming an infinite chain along the [010] direction, from which the cations are pendent. The steric, electronic and geometric features are compared with those of similar compounds. In this way, structural relationships are stated in terms of the influence of the sulfate group on the protonation of the heterocycle and on the tautomeric equilibrium in the solid state.     

CO2 Capture by Hydroxylated Azine-Based Covalent Organic Frameworks

Covalent organic frameworks (COFs) RIO-13, RIO-12, RIO-11, and RIO-11m were investigated towards their CO₂ capture properties by thermogravimetric analysis at 1 atm and 40 °C. These microporous COFs bear in common the azine backbone composed of hydroxy-benzene moieties but differ in the relative number of hydroxyl groups present in each material. Thus, their sorption capacities were studied as a function of their textural and chemical properties. Their maximum CO₂ uptake values showed a strong correlation with an increasing specific surface area, but that property alone could not fully explain the CO₂ uptake data. Hence, the specific CO₂ uptake, combined with DFT calculations, indicated that the relative number of hydroxyl groups in the COF backbone acts as an adsorption threshold, as the hydroxyl groups were indeed identified as relevant adsorption sites in all the studied COFs. Additionally, the best performing COF was thoroughly investigated, experimentally and theoretically, for its CO₂ capture properties in a variety of CO₂ concentrations and temperatures, and showed excellent isothermal recyclability up to 3 cycles.     

Spiro-Carbon: A Metallic Carbon Allotrope Predicted from First Principles Calculations

A structurally stable microporous metallic carbon allotrope, poly(spiro[2.2]penta-1,4-diyne) or, for short, spiro-carbon, with I4₁/amd (D_4h) symmetry is predicted by first-principles calculations using density functional theory (DFT). The calculations of electronic, vibrational, and structural properties show that spiro-carbon has lower relative energy than other elusive carbon allotropes such as T-Carbon and 1-diamondyne (Y-Carbon). Its structure can be pictured as a set of trans-cisoid-polyacetylene chains tangled and interconnected together by sp³ carbon atoms. Calculations reveal a metallic electronic structure arising from an “intrinsic doping” of trans-cisoid-polyacetylene chains with sp³ carbon atoms. Possible synthetic routes and various simulated spectra (XRD, NMR, and IR absorption) are provided in order to guide future efforts to synthesize this novel material.     

Self-assembly of ligands designed for the building of a new type of [2 x 2] metallic grid. anion encapsulation and diffusion NMR spectroscopy

The ligands 4,6-bis(pyrazol-1-yl)pyrimidine (bpzpm), 4,6-bis(3,5-dimethylpyrazol-1-yl)pyrimidine (bpz(*)pm), 4,6-bis(4-methylpyrazol-1-yl)pyrimidine (Mebpzpm), and 3,6-bis(3,5-dimethylpyrazol-1-yl)pyridazine (ppdMe) were synthesized and were made to react with Cu(I) centers in the presence of different counteranions. Different [2 x 2] metallic grids were obtained. With ligands bpzpm, bpz*pm, and Mebpzpm, a new type of grid was obtained where the facing ligands were divergent and two counteranions (BF(4-) or PF(6-)) were hosted in the resulting cavities and exhibit C-H...F and anion...pi interactions in the solid state. The presence of methyl groups on the pyrazolyl rings induced several distortions in the structure. In complexes with the ligand ppdMe, there were found two groups of parallel ligands in the grid, and the cavities generated were smaller. The counteranions were situated outside the grid, and the facing ligands exhibited aromatic pi-pi stacking interactions. Anion-pi interactions involving the pyridazine ring were found. The behavior in solution of the new derivatives with a special emphasis on the cation-anion interactions was studied by UV-vis and NMR spectroscopy. Diffusion NMR experiments performed for some complexes allowed us to conclude that weak cation-anion interactions exist in solution, with the counteranions undergoing fast exchange on the diffusion time scale between the free and ion-paired states.