Influence of carrier gas pressure and flow rate on atomic layer deposition of HfO2 and ZrO2 thin films

Influence of the carrier gas on HfCl₄-H₂O and ZrCl₄-H₂O atomic layer processes was investigated. The growth rates of HfO₂ and ZrO₂ decreased with increasing flow rate and pressure of the N₂ carrier gas. Data of real-time quartz crystal microbalance measurements demonstrated that the effect observed was mainly due to influence of carrier gas on surface reactions and the role of overlapping the precursor pulses was negligible. At the same increase of the carrier gas mass flow, the increase of the linear flow rate led to more significant changes of thin-film properties than the increase of the carrier gas pressure did. Thin films with higher density, higher refractive index and, particularly, lower concentration of residual chlorine were obtained at higher carrier gas flow rates. Increase of the carrier gas flow rate also resulted in a higher concentration of a metastable phase in HfO₂ thin films deposited at 300 °C.     

Influence of vehicle color on loudness judgments

This experiment investigates the effect of images of differently colored sports cars on the loudness of a simultaneously perceived car sound. Still images of a sports car, colored in red, light green, blue, and dark green, were displayed to subjects during a magnitude estimation task. The sound of an accelerating sports car was used as a stimulus. Statistical analysis suggests that the color of the visual stimulus may have a small influence on loudness judgments. The observed loudness differences are generally equivalent to a change in sound level of about 1 dB, with maximum individual differences of up to 3 dB.     

Development and application of electrochemical sensor of boron-doped diamond (BDD) modified by drop casting with tin hexacyanoferrate

Journal of Solid State Electrochemistry - This work presents the development and characterization of an electrochemical sensor of tin hexacyanoferrate (SnHCF), produced from the modification by...     

On Transfer Operators for Continued Fractions with Restricted Digits

For any non-empty subset I of the natural numbers, let _I denotethose numbers in the unit interval whose continued fractiondigits all lie in I. Define the corresponding transfer operator for , where Re (rß) = _I is the abscissa of convergence of the series . When acting on a certain Hilbert space H_I, rß, weshow that the operator L_I, rß is conjugate to an integraloperator K_I, rß. If furthermore rß is real,then K_I, rß is selfadjoint, so that L_I, rß: H_I, rß H_I, rß has purely real spectrum.It is proved that L_I, rß also has purely real spectrumwhen acting on various Hilbert or Banach spaces of holomorphicfunctions, on the nuclear space C [0, 1], and on the Fréchetspace C [0, 1]. The analytic properties of the map rß L_I, rßare investigated. For certain alphabets I of an arithmetic nature(for example, I = primes, I = squares, I an arithmetic progression,I the set of sums of two squares it is shown that rß L_I, rß admits an analytic continuation beyond thehalf-plane Re rß > _I. 2000 Mathematics SubjectClassification 37D35, 37D20, 30B70.     

Hetero-Diels-Alder Cycloadditions of α,β-Unsaturated Acyl Cyanides,Part 4 , Substituent Effects in Reactions with p-Substituted Styrenes

Cycloadditions of α,β-unsaturated acyl cyanides (=2-oxonitriles) 1 – 6 to styrene and its p-substituted derivatives 7a – f , h are of inverse electron demand and provide, under mild conditions, regio- and stereoselectively 2-aryl-3,4-dihydro-2H-pyran-6-carbonitriles 8 – 13 , generally in good yield. Rates for the cycloaddition of acryloyl cyanide 1 to p-substituted styrenes, determined in competition reactions of substrate pairs relative to that of styrene, increase in the order of electron-donating ability NO₂<Cl<H<AcO<Me<AcNH<MeO of the p-substituent. Linear correlation of log (k_X/k_H), and σ_p⁺ substituent constants (a Hammett-type plot), gives a reaction constant ρ_p⁺ of −1.47±0.17, supporting a concerted mechanism.     

Van der waals-like isotherms in a confined electrolyte by spherical and cylindrical nanopores

Electrolytes confined by spherical, cylindrical, and slit-like charged nanopores are studied. Results for ionic distribution profiles, pressures of the confined fluid, and absorption isotherms are obtained through the hypernetted chain/mean spherical approximation (HNC/MSA) integral equations theory. In spherical and cylindrical geometries, an inward, non-monotonic behavior of the pressure is found as confinement increases, implying a negative compressibility. The pressure vs volume isotherms resemble liquid-vapor van der Waals-like phase transition diagrams. This effect is correlated with a charge separation inside a spherical pore previously reported (Phys. Rev. Lett., 79, 3656, 1997). Here, the mechanism of charge separation and negative compressibility are explored in detail. When compared with the slit-like pore pressure, important qualitative differences are found.     

Three‐Component Langmuir–Blodgett Films Consisting of Surfactant,Clay Mineral,and Lysozyme: Construction and Characterization

The Langmuir–Blodgett (L–B) technique has been employed for the construction of hybrid films consisting of three components: surfactant, clay, and lysozyme (Lys). The surfactants are octadecylammonium chloride (ODAH) and octadecyl ester of rhodamine B (RhB18). The clays include saponite and laponite. Surface pressure versus area isotherms indicate that lysozyme is adsorbed by the surfactant–clay L–B film at the air–water interface without phase transition. The UV‐visible spectra of the hybrid film ODAH–saponite–Lys show that the amount of immobilized lysozyme in the hybrid film is (1.3±0.2) ng mm^?2. The average surface area (Ω) per molecule of lysozyme is approximately 18.2 nm² in the saponite layer. For the multilayer film (ODAH–saponite–Lys)_n, the average amount of lysozyme per layer is (1.0±0.1) ng mm^?2. The amount of lysozyme found in the hybrid films of ODAH–laponite–Lys is at the detection limit of about 0.4 ng mm^?2. Attenuated total reflectance (ATR) FTIR spectra give evidence for clay layers, ODAH, lysozyme, and water in the hybrid film. The octadecylammonium cations are partially oxidized to the corresponding carbamate. A weak 1620 cm^?1 band of lysozyme in the hybrid films is reminiscent of the presence of lysozyme aggregates. AFM reveals evidence of randomly oriented saponite layers of various sizes and shapes. Individual lysozyme molecules are not resolved, but aggregates of about 20 nm in diameter are clearly seen. Some aggregates are in contact with the clay mineral layers, others are not. These aggregates are aligned in films deposited at a surface pressure of 20 mN m^?1.     

Boron‐Containing Probes for Non‐optical High‐Resolution Imaging of Biological Samples

Boron has been employed in materials science as a marker for imaging specific structures by electron energy loss spectroscopy (EELS) or secondary ion mass spectrometry (SIMS). It has a strong potential in biological analyses as well; however, the specific coupling of a sufficient number of boron atoms to a biological structure has proven challenging. Herein, we synthesize tags containing closo‐1,2‐dicarbadodecaborane, coupled to soluble peptides, which were integrated in specific proteins by click chemistry in mammalian cells and were also coupled to nanobodies for use in immunocytochemistry experiments. The tags were fully functional in biological samples, as demonstrated by nanoSIMS imaging of cell cultures. The boron signal revealed the protein of interest, while other SIMS channels were used for imaging different positive ions, such as the cellular metal ions. This allows, for the first time, the simultaneous imaging of such ions with a protein of interest and will enable new biological applications in the SIMS field.     

Intriguing Differences in the Gas-Phase Dissociation Behavior of Protonated and Deprotonated Gonyautoxin Epimers

The aim of this study was to investigate the unusual gas-phase dissociation behavior of two epimer pairs of protonated gonyautoxins (GTX) following electrospray ionization in comparison to their deprotonated counterparts. The chemical structures of the investigated GTX1-4 variants vary in their substitution pattern at N-1 and the stereochemical orientation of the hydroxysulfate group at C-11 (11α for GTX1/2 versus 11β for GTX3/4). The direct comparison of mass spectra in positive and negative ion modes illustrated two distinct features: first, an intriguing difference between protonated 11α and 11β species, where 11α conformations exhibited almost complete dissociation of [M + H]⁺ ions via facile SO₃ elimination, while 11β species remained mostly intact as [M + H]⁺; and second, the lack of such differences for the deprotonated counterparts. In this study, we propose an acid-catalyzed elimination mechanism from density functional theory calculations, initiated by a proton transfer of a guanidinium proton to the hydroxysulfate group with simultaneous SO₃ release, which is only possible for the 11α conformation based on intramolecular distances. The same mechanism explains the lack of a comparable SO₃ loss in the negative ion mode. CID experiments supported this proposed mechanism for GTX1 and GTX2. Computational modeling of product ions seen in the CID spectra of GTX3 and GTX4 established that the lowest energy dissociation pathway for the 11β epimers is elimination of water with the possibility for further SO₃ release from the intermediate product. Experimental data for structurally analogous decarbamoyl gonyautoxins confirmed the evidence for the GTX compounds as well as the proposed elimination mechanisms.