Rheology and microstructure of gluten and soya-based o/w emulsions

Highly concentrated oil-in-water (o/w) emulsion stabilised by means of gluten and soya protein isolate (SPI) at low pH have been characterized by means of linear dynamic viscoelasticity and droplet size distribution analysis (DSD). The microstructure of these emulsions has been characterized at a colloidal level by using confocal laser scanning microscopy (CLSM) and light microscopy (LM). These emulsions always exhibited a behaviour characteristic of highly flocculated emulsions with a mechanical spectrum showing a well-developed plateau region. DSD results generally showed log normal bimodal profiles. Microstructure images revealed occurrence of a close packing of droplets with a broad distribution of sizes participating in the formation of a three dimensional flocculated network. The Mason model of elasticity of compressed emulsions has been used to correlate viscoelastic and microstructural parameters giving adequate fitting but underestimating the elastic properties obtained for the highest concentration of gluten. These deviations may be explained in terms of an enhancement of the elastic network formed in the aqueous phase in which the glutenin fraction must play an important role. Paper presented at the Annual European Rheology Conference (AERC) 2005, April 21-23, Grenoble, France.     

Quantitative colorimetric-imaging analysis of nickel in iron meteorites

A quantitative analytical imaging approach for determining the nickel content of metallic meteorites is proposed. The approach uses a digital image of a series of standard solutions of the nickel-dimethylglyoxime coloured chelate and a meteorite sample solution subjected to the same treatment as the nickel standards for quantitation. The image is processed with suitable software to assign a colour-dependent numerical value (analytical signal) to each standard. Such a value is directly proportional to the analyte concentration, which facilitates construction of a calibration graph where the value for the unknown sample can be interpolated to calculate the nickel content of the meteorite. The results thus obtained were validated by comparison with the official, ISO-endorsed spectrophotometric method for nickel.The proposed method is fairly simple and inexpensive; in fact, it uses a commercially available digital camera as measuring instrument and the images it provides are processed with highly user-friendly public domain software (specifically, ImageJ, developed by the National Institutes of Health and freely available for download on the Internet).In a scenario dominated by increasingly sophisticated and expensive equipment, the proposed method provides a cost-effective alternative based on simple, robust hardware that is affordable and can be readily accessed worldwide. This can be especially advantageous for countries were available resources for analytical equipment investments are scant. The proposed method is essentially an adaptation of classical chemical analysis to current, straightforward, robust, cost-effective instrumentation.     

Intriguing Differences in the Gas-Phase Dissociation Behavior of Protonated and Deprotonated Gonyautoxin Epimers

The aim of this study was to investigate the unusual gas-phase dissociation behavior of two epimer pairs of protonated gonyautoxins (GTX) following electrospray ionization in comparison to their deprotonated counterparts. The chemical structures of the investigated GTX1-4 variants vary in their substitution pattern at N-1 and the stereochemical orientation of the hydroxysulfate group at C-11 (11α for GTX1/2 versus 11β for GTX3/4). The direct comparison of mass spectra in positive and negative ion modes illustrated two distinct features: first, an intriguing difference between protonated 11α and 11β species, where 11α conformations exhibited almost complete dissociation of [M + H]⁺ ions via facile SO₃ elimination, while 11β species remained mostly intact as [M + H]⁺; and second, the lack of such differences for the deprotonated counterparts. In this study, we propose an acid-catalyzed elimination mechanism from density functional theory calculations, initiated by a proton transfer of a guanidinium proton to the hydroxysulfate group with simultaneous SO₃ release, which is only possible for the 11α conformation based on intramolecular distances. The same mechanism explains the lack of a comparable SO₃ loss in the negative ion mode. CID experiments supported this proposed mechanism for GTX1 and GTX2. Computational modeling of product ions seen in the CID spectra of GTX3 and GTX4 established that the lowest energy dissociation pathway for the 11β epimers is elimination of water with the possibility for further SO₃ release from the intermediate product. Experimental data for structurally analogous decarbamoyl gonyautoxins confirmed the evidence for the GTX compounds as well as the proposed elimination mechanisms.     

Kinetic, DFT and TD-DFT studies on the mechanism of stabilization of pyramidal H3PO3 at the [Mo3M'S4(H2O)10]4+ clusters (M' = Pd, Ni)

The kinetics of reaction between the [Mo(3)M'S(4)(H(2)O)(10)](4+) clusters (M' = Pd, Ni) and H(3)PO(3) has been studied in 4.0 M Hpts/Lipts (pts(-) = p-toluenesulfonate). For both complexes there is an initial kinetic step with small absorbance changes that corresponds to substitution of the water coordinated to Pd by a molecule of tetrahedral H(3)PO(3). For the Pd complex, tautomerization of H(3)PO(3) occurs in a slower kinetic step with much larger absorbance changes; it leads to formation of [Mo(3)Pd(pyr-H(3)PO(3))S(4)(H(2)O)(9)](4+) in which H(3)PO(3) adopts a pyramidal structure, but the process is not as favored as for H(3)PO(2). The kinetics of this second step is independent of the concentration of H(3)PO(3) but dependent on the concentration of Hpts on the supporting electrolyte. For the Ni complex, the second step is severely hindered and its kinetics could not be studied. DFT calculations indicate that tautomerization of H(3)PO(3) is expected to be less favoured than that of H(3)PO(2), both processes being less favored at the Ni cluster than at its Pd analogue. With regard to the tautomerization mechanism, the calculations indicate that the mechanism previously proposed for H(3)PO(2) can be the same for H(3)PO(3), although the initial H-shift can also occur through a protonation-deprotonation sequence with participation of external protons instead of a second molecule of the phosphorus acid. TD-DFT studies have been also carried out to understand the similarity between the spectra of the starting complex and the reaction intermediate formed in the first kinetic step as well as the large spectral changes associated to the tautomerization process. Although it contains contributions from several transitions, the intense band observed for clusters containing coordinated pyr-H(3)PO(3) involves essentially ligand-to-metal charge-transfer (LMCT) transitions.     

A non-autonomous strongly damped wave equation: Existence and continuity of the pullback attractor

In this paper we consider the strongly damped wave equation with time-dependent terms

u_tt−Δu−γ(t)Δu_t+β_ε(t)u_t=f(u),     

Synthesis and application of imprinted polyvinylimidazole-silica hybrid copolymer for Pb determination by flow-injection thermospray flame furnace atomic absorption spectrometry

A novel ion imprinted polyvinylimidazole-silica hybrid copolymer (IIHC) was synthesized and used as a selective solid sorbent for Pb²⁺ ions preconcentration using an on-line solid phase extraction (SPE) system coupled to TS-FF-AAS. The ionic hybrid sorbent was prepared using 1-vinylimidazole and 3-(trimethoxysilyl)propylmethacrylate as monomers, Pb²⁺ ions as template, tetraethoxysilane as reticulating agent and 2,2′-azobis-isobutyronitrile as initiator. The best on-line SPE conditions concerning sorption behavior, including sample pH (6.46), buffer concentration (9.0 mmol L⁻¹), eluent (HNO₃) concentration (0.5 mol L⁻¹) and preconcentration flow rate (4.0 mL min⁻¹), were optimized by means of full factorial design and Doehlert matrix. The analytical curve ranged from 2.5 to 65.0 μg L⁻¹ (r = 0.999) with limit of detection of 0.75 μg L⁻¹; the precision (repeatability) calculated as relative standard deviation (n = 10) was 5.0 and 3.6% for Pb²⁺ concentration of 10.0 and 60.0 μg L⁻¹, respectively. From on-line breakthrough curve, column capacity was 3.5 mg g⁻¹. Preconcentration factor (PF), consumptive index (CI) and concentration efficiency (CE) were 128.0, 0.16 mL and 25.6 min⁻¹, respectively. The selective performance of the sorbent, based on relative selectivity coefficient, was compared to NIC (non imprinted copolymer) for the binary mixture Pb²⁺/Cd²⁺, Pb²⁺/Cu²⁺ and Pb²⁺/Zn²⁺. The results showed that ion imprinted polyvinylimidazole-silica hybrid polymer had higher selectivity for Pb²⁺ than NIC at 64.9, 16.0 and 8.8 folds. The developed method was successfully applied for highly sensitive and selective Pb²⁺ determination in different kinds of water samples, parenteral solutions and urine. Accuracy was also assessed by analyzing certified reference fish protein (DORM-3) and marine sediment (MESS-3 and PACS-2) with satisfactory results.     

Hydrogen-bond-mediated self-assembly of 26-membered diaza tetraester crowns of 3,5-disubstituted 1H-pyrazole. Dimerization study in the solid state and in CDCl3 solution

By using an improved synthetic method reported earlier, the cyclic stannoxanes obtained from RN-diethanolamine (R = Me, Bu) and dibutyltin oxide have been reacted with 1H-pyrazole-3,5-dicarbonyl dichloride to afford 26-membered diaza tetraester crowns (1, R = Me; 3, R = Bu) and 39-membered triaza hexaester crowns (2, R = Me; 4, R = Bu). The new structures were identified from their analytical and spectroscopic ((1)H and (13)C NMR, FAB-MS, and/or ESI-MS) data. Both diaza tetraester crowns (1 and 3), containing two 1H-pyrazole units, self-assemble into dimeric species through the formation of four hydrogen bonds involving the two NH pyrazole groups and the two tertiary amine groups of both crowns, as proved by X-ray crystallography and NMR analysis. Preliminary NMR, ESI-MS, MALDI-TOF-MS, and molecular modeling studies suggest that, in CDCl(3) solution, 1 interacts with ethyleneurea (ETU), affording 1:1, 2:1, and 2:2 1-ETU complexes.     

Confinement of halide ions within homologous inverse coordination hosts; modification of halide-ion selectivity

The structures of a series of spherical host-guest complexes [{MeE(PPh)(3)Li(4)·3thf}(4)(μ(4)-X)](-) (E = Al, [1X](-); E = Ga, [2X](-); E = In, [3X](-)) reveal that changing the halide ions (X = Cl, Br, or I) within their central tetrahedral Li(4) sites has negligible effect on the structural parameters.     

Time resolved spectroscopy of 2-(dimethylamine)fluorene. Solvent effects and photophysical behavior

The effect of different solvents on the fluorescent properties of 2-(dimethylamine)fluorene (DAF) were studied. In aprotic solvents we detected a strongly emissive intramolecular charge transfer (ICT) state that decayed by intersystem crossing to triplet. In proton-accepting solvents DAF exhibits in the excited state an intramolecular proton transfer. An ionized species is postulated, which simultaneously twists to a rotated conformation in the excited state. Thus, the specific solvent interactions supplement but do not replace the twist mechanism and accompany the charge transfer accepted as the prerequisite for twisted intramolecular charged transfer (TICT) state formation.