Selective solid-phase microextraction of polycyclic aromatic hydrocarbons in water based on oriented phosphorus-containing titanium oxide nanofibers grown on titanium support prior to high-performance liquid chromatography with ultraviolet detection

A novel solid-phase microextraction coating of phosphorous-containing titanium oxide composite was developed using titanium fiber as a support and a titanium source by hydrothermal oxidation in a phosphoric acid solution containing hydrogen peroxide. The morphology of the fiber coatings was controlled by the conditions of the hydrothermal oxidation reaction. The oriented nanofiber coating was employed to extract several types of representative aromatic analytes. The experimental results demonstrated that the as-prepared fiber exhibited excellent extraction efficiency toward polycyclic aromatic hydrocarbons. Combined with high-performance liquid chromatography with ultraviolet detection, main extraction conditions were optimized, including pH, ionic strength, extraction temperature, stirring rate, extraction time and desorption time. The established method presented good linearity from 0.05 to 200 μg/L with limit of detection ranging from 0.012 to 0.126 μg/L. This convenient and green procedure was suitable for the selective extraction and determination of typical polycyclic aromatic hydrocarbons in environmental water samples. The relative recoveries of 85.8–112% were obtained for the determination of target polycyclic aromatic hydrocarbons in water samples spiked with 5.0 and 15.0 μg/L. Moreover, the as-prepared fiber showed at least 210 extraction/desorption cycles due to its high mechanical and chemical stability.     

Redox targeting of energy materials

The redox-mediated electrochemical–chemical process, when it involves the redox-targeting reaction with energy materials, has shown intriguing potential for various energy-related applications. This review starts with a brief discussion on the evolution of redox-targeting reactions for high-energy redox-flow batteries and the critical future studies for large-scale energy storage. Then, with spatially decoupled water electrolysis as an example, the merits of redox-targeting reaction by liberating the catalyst from electrode surface are highlighted, followed by an introduction of redox targeting–based thermal-to-electrical conversion. We have also featured various redox-targeting processes in other fields of study, such as electrochromic window, redox catalysis, and spent battery material recycling. Overall, this review attempts to demonstrate the incredible versatility and prospects of redox-targeting process for energy-related applications.     

基于电磁拓扑的多腔体屏蔽效能快速算法

提出基于电磁拓扑理论计算开孔多腔体屏蔽效能的快速方法.首先给出双腔体等效电路和电磁拓扑信号流图,并推导孔缝节点处的散射矩阵,给出拓扑网络的散射矩阵方程和传输矩阵方程,获得双腔体的广义Baum-Liu-Tesche(BLT)方程.在此基础上研究了开孔三腔体,包括串型级联三腔体和串并型混合级联三腔体的广义BLT方程.对于串型级联三腔体,其电磁拓扑网络和广义BLT方程在双腔体基础上直接扩展即可获得.而对于串并型混合级联三腔体,通过将位于三腔体公共面上的孔缝等效为三端口网络节点,并根据三端口网络散射参数定义推导获得该节点的散射矩阵,最终得到串并型混合级联三腔体的广义BLT方程.本文方法对双腔体的计算结果与文献结果和实验结果相符合,对3组不同类型和尺寸开孔腔的屏蔽效能的计算结果与时域有限差分法计算结果符合较好.该算法不仅效率高,通过对所有计算结果和实验结果的误差统计分析,表明该算法具有较高的计算准确度.     

Distributed Bragg reflector laser(1.8 μm) with 10 nm wavelength tuning range

We report a 1.8 μm two-section distributed Bragg reflector laser using butt-jointed In Ga As P bulk material as the waveguide core layer. The threshold current is 17 m A and the output power is 8 m W on average. The threshold current, output power, and emitting wavelength dependences on temperature are measured. The obtained wavelength tuning range is 10 nm. This device has potential applications in simultaneous multiple-gas detection.     

Hydrophilic–oleophobic coatings on cellulosic materials by plasma assisted polymerization in liquid phase and fluorosurfactant complexation

Materials with hydrophilic–oleophobic properties are of relevance due to their application to different fields such as self-cleaning coatings, liquid–liquid separation membranes and functional textiles for different technical applications. In this work, hydrophilic–oleophobic coatings have been deposited on cellulosic materials (filter paper and bleached cotton) by means of plasma assisted polymerization of acrylic acid solutions in water followed by cationic fluorosurfactant complexation. Chemical composition of the coatings on cellulosic materials was characterized by means of FTIR–ATR and XPS whereas their morphology was studied by SEM. Hydrophilic–oleophobic behavior was characterized by means of contact angle and wetting time. Additionally wetting properties of cationic, anionic and non-ionic surfactant solutions on the hydrophilic–oleophobic coatings were used to characterize the polyelectrolyte electrostatic forces upon the functionalized layer.     

Palladium‐Catalyzed Decarboxylative Cycloaddition of Vinylethylene Carbonates with Formaldehyde: Enantioselective Construction of Tertiary Vinylglycols

An efficient method for the enantioselective construction of tertiary vinylglycols through a palladium‐catalyzed asymmetric decarboxylative cycloaddition of vinylethylene carbonates with formaldehyde was developed. By using a palladium complex generated in situ from [Pd₂(dba)₃]?CHCl₃ and a phosphoramidite ligand as a catalyst under mild reaction conditions, the process allows conversion of racemic 4‐substituted 4‐vinyl‐1,3‐dioxolan‐2‐ones into the corresponding 1,3‐dioxolanes, as methylene acetal protected tertiary vinylglycols, in high yields with good to excellent enantioselectivities.     

Effect of temperature on the morphologies and electrochemical properties of polyaniline-gold fibrillar nanocomposites

The polyaniline-gold (PANI-AuNPs) fibrillar nanocomposites were prepared via a simple one-pot synthesis route in ethylene glycol (EG) medium. The morphology of PANI-AuNPs was characterized by transmission electron microscopy (TEM), and their electrochemical properties were studied by CV, TAF and EIS measurement using an electrochemical workstation. The results show that the morphology of nanocomposites can be controlled by changing the temperature. The diameter of PANI-AuNPs composite nanofiber reduce from about 80 to 30 nm, and the size of AuNP also reduce from about 20 to 4 nm, with the rise of synthesized temperature. When the synthesized temperature is 10°C, the distribution of AuNPs is the best, and the amount of AuNPs dispersed in PANI is the most, as well as the electrochemical performance of PANI-AuNPs is the most excellent.     

Ring Opening of N‐Sulfonyl Aziridines by Amines in Silica‐Water

Ring opening reactions of N‐sulfonyl aziridines by primary and secondary amines in silica gel (SG)‐water system were achieved, which provided a mild, practical and environmentally benign method to synthesize mono‐ and bis‐sulfonyl substituted amines. When primary and secondary amines were used in excess, they reacted with N‐sulfonyl aziridines smoothly at room temperature, mainly affording 1:1 ring opening products. Reactions of primary amines with 2 equiv. of aziridines produced 2:1 ring opening products. Some 1:1 products can be cyclized with CS₂ to synthesize N‐sulfonyl cyclothioureas also in water.     

Three dimension Liesegang rings of calcium hydrophosphate in gelatin

Three dimensional Liesegang spherical layers of CaHPO₄ in gelatin ball were performed by employing CaCl₂ and Na₂HPO₄ as the inner and outer electrolyte, respectively. Effects of concentrations of inner and outer electrolyte as well as pH on the morphologies of Liesegang rings (LRs) were investigated. As a result, it was observed that the time law, spacing law and width law found in 1D/2D gel systems were obeyed in this 3D gelatin system. The interaction of Ca²⁺ and HPO₄ ^2? with gelatin matrix played a key role to the formation of LRs due to the existence of carboxylic groups on the gelatin chains. Using Ca²⁺ as the inner electrolyte, LRs were prepared. However, employing HPO₄ ^2? as inner electrolyte, LRs were not obtained. Moreover, pH of gelatin solution greatly impacted on the formation of LRs. The number of LRs increased with the decrease of pH, whereas the width inversely decreased. pH 4.40 was a turn point, from which the spacing coefficient abruptly increased as pH increased. All these results indicated that the network was created by the interaction of Ca²⁺ and –COO^? of gelatin chains, which dominated the formation of CaHPO₄ LRs in gelatin.