343 nm飞秒激光制备微孔阵列以增强聚氨酯合成革透湿性

为了提高聚氨酯(PU)合成革透湿性,分别使用343 nm飞秒激光和作为对比的1030 nm飞秒激光及1064 nm纳秒激光制备微孔阵列。采用扫描电镜(SEM)和3D激光扫描显微镜对比研究了微孔形貌。结果表明,343 nm飞秒激光可以制备出效果最佳的微孔。此外,分析了3种激光与PU涂层的作用机理,揭示了343 nm飞秒激光合成革微钻孔过程仅表现为光化学烧蚀,光化学和光热烧蚀同时发生于1030 nm飞秒激光钻孔过程,而1064 nm纳秒激光只显示了光热烧蚀。激光合成革表面钻孔后,测量其透湿性和抗张力。结果显示: 微孔密度越大,皮革透湿性(WVP)越大而抗张力越低,脉冲重叠的增加会导致WVP的增加和抗张力的下降;同时,随着脉冲重叠从91.7%降到50%,微孔直径从45 μm降低到30 μm,而微孔锥度从0.7°增加到12.1°;当脉冲重叠率为91.7%,微孔密度为2550/cm²时,最大的WVP增长率为306%。     

A novel fiber optic ring-down interferometer for sensing

A ring-down interferometer (RDI) based on a modified Mach–Zehnder structure by incorporating a pair of mirrors with very high reflectivity into each of its two arms, respectively is proposed in this paper. Launching a coherent light pulse into the interferometer, in each arm, pulse ring-down occurs between its two mirrors and outputs a chain of pulses. The two chains of pulses from the two arms combine and interfere pulse by pulse at the detector and the difference of the light phase between the two arms will be enlarged linearly in proportion to the times of ring-down.     

A Note on Resistance of NPT to Mixture of Separable States

We study the stability of NPT property of an arbitrary pure entangled state under the mixture of arbitrary pure separable states. For bipartite pure states with Schmidt number n (n>1) which is NPT, we show that this state is still NPT when it is mixed with no more than $\frac {n(n-1)}{2}-1$ arbitrary pure separable states. This result is generalized to multipartite case.     

微波辐照活性炭床同时脱除SO2和NOx实验研究

论文进行了微波辐照活性炭同时脱硫脱硝实验,研究了烟气中不同组分对脱硫脱硝效率的影响。结果表明,高浓度SO₂对脱硝有轻微抑制。NO对脱硫有一定程度的促进;烟气中O₂的加入对脱硫脱硝均有促进作用;而含湿量的增加首先会使脱硫脱硝效果提高,当含湿量增至9.1%时,脱硫脱硝效率均有下降趋势;烟气中加入CO₂后,脱硫脱硝效率均下降,在氧含量为10%时,脱硫效率下降6%,脱硝效率下降7%。BET测试表明,微波辐照活性炭后其表面积与基炭相比有少量下降。     

亚10 μm线宽的投影光刻物镜设计及其成像性能的实验测定

 采用Zemax软件设计出6镜片、数值孔径为0.06、2倍缩小、以405 nm半导体激光器为光源、分辨精度达5 μm、视场12 mm×12 mm 内波像差小于1/4波长、畸变小于0.005%的双远心投影光刻物镜的设计方法。将设计的物镜实物化,并对其光学传递函数(MTF)作精确的实验测定,利用所提出的MTF标准实验测量法,得到该投影物镜的成像性能达亚10 μm线宽。     

Investigation of laminar plasma remelting/cladding processing

Investigation of remelting and cladding processing with laminar plasma jets on several metals has been conducted looking for possible development of a new surface modification technique. The remelting tests illustrated that the new method could evidently improve the material microstructure and properties of cast iron. The cladding was done with Al₂O₃ ceramic powder on stainless steel. The energy dispersive spectra (EDS) analysis was used to determine the distribution of the major cladding element in the plasma-processed layers, for which the microstructure observations and hardness measurements were also performed.     

塑料光纤拉丝塔控制系统设计

为减小塑料光纤纤芯直径波动造成的非固有散射损耗,设计了一种新型光纤拉丝塔控制系统,详细阐述了其工作原理及软硬件实现过程。采用单片机作为核心处理部件,合理设计传感器测温电路、加热炉温度控制电路、直径测量和控制电路以及友好的人机界面。实验表明系统拉丝芯径范围宽(0.2～3mm),拉制光纤直径均匀,精度可控制在15μm以内。整个系统成本低,实用价值高,满足塑料光纤实验室研究需要,可供实际生产参考。     

Characteristics of Entanglement Wave in Two Parallel Spin Chains

Based on the solvable spin-1/2 Heisenberg chain we demonstrate how two many-body systems are entangled due to their partial entanglement. The entanglement wave in the two spin chains displays a damped oscillation if the spin number is N 〉 3, and only propagates with a certain velocity depending on the coupling constant J. Moreover, the entanglement wave will be reflected on the other ends of the two spin chains. A simple scheme for transferring some special two-qubit states to other two distant qubits is also proposed.     

Hydrothermal Preparation of Photoluminescent Graphene Quantum Dots Characterized Excitation‐Independent Emission and its Application as a Bioimaging Reagent

Zero‐dimensional photoluminescent (PL) graphene quantum dots (GQDs) that can be used as the cell‐imaging reagent are prepared by a hydrothermal route using the graphene oxide (GO) as the carbon source. Under the optimized hydrothermal conditions, an initial hydrogen peroxide concentration of 0.5 mg mL^?1 at 180 °C for 120 min, the GO sheets can be cut into nanocrystals with lateral dimensions in the range of 1.5–5.5 nm and an average thickness of around 1.1 nm. The as‐prepared GQDs exhibit an abundance of hydrophilic hydroxy and carboxyl groups and emit bright blue luminescence with up‐conversion properties in a water solution at neutral pH. Most interestingly, they indicate excitation‐independent emission characteristics, and the surface state is demonstrated to have a key role in the PL properties. The fluorescence quantum yield of the GQDs is tested to be around 6.99% using quinine sulfate as a standard. In addition, the as‐prepared GQDs can enter into HeLa cells easily as a fluorescent imaging reagent without any further functionalization, indicating they are aqueous stability, biocompatibility, and promising for potential applications in biolabeling and solution state optoelectronics.     

Temperature anomaly of the Cd hyperfine field in a trivacancy complex in Ni

The temperature dependence of the Cd hyperfine field in a trivacancy complex in Ni between 25 and300 K is reported. It was found that, unlike the Cd substitutional field in Ni which follows the temperature dependence of the magnetization, the Cd hyperfine field in a trivacancy complex is essentially temperature independent. This temperature anomaly is compared with other temperature anomaly of impurity hyperfine fields in ferromagnetic hosts.