等离子体发射光谱法测定碳化硅中的游离总硅含量

针对分光光度法测定游离总硅含量受干扰因素多、测试数据不稳定的缺点,探讨了采用ICP-AES法测定碳化硅中游离总硅含量。采用行星球磨仪对碳化硅样品进行研磨,以硝酸钠、硝酸、氢氟酸作溶剂,采用微波消解法处理样品。选择212．412nm特征谱线并以其强度U）与对应的硅浓度（c）建立校准曲线,硅的质量浓度在10-100μg／mL范围内与特征谱线强度呈良好的线性关系,线性方程为I=233．76c＋86．94,线性相关系数间．997,检出限为0．027μg／mL。测定结果的相对标准偏差为1．35％～2．79%（n=6）。加标回收率为97．6％～108．0％。该法测定碳化硅中游离总硅含量是可行的。     

基于半刚性二羧酸配体的两个三维镉（Ⅱ）配位聚合物

通过引入2个不同的氮杂环配体,得到了2个Cd（Ⅱ）配位聚合物[Cd（m-phda）（btbb）_0.5]_n（1）和[Cd（m-phda）（hbmb）_0.5]_n（2）（m-H₂phda=间苯二乙酸）,并对它们的结构进行了表征。结构分析表明配合物1是一个6-连接的pcu拓扑网络,拓扑符号为4¹²·6³。配合物2是一个5-连接的sqp拓扑网络,拓扑符号为（4⁴·6⁶）。另外,配合物1和2表现出较好的热稳定性和不同的荧光行为。     

Zinc Porphyrins with a Pyridine‐Ring‐Anchoring Group for Dye‐Sensitized Solar Cells

Anchoring groups are extremely important in controlling the performance of dye‐sensitized solar cells (DSCs). The design and characterization of sensitizers with new anchoring groups, in particular non‐carboxylic acid groups, has become a recent focus of DSC research. Herein, new donor? π? acceptor zinc? porphyrin dyes with a pyridine ring as an anchoring group have been designed and synthesized for applications in DSCs. Photophysical and electrochemical investigations demonstrated that the pyridine ring worked effectively as an anchoring group for the porphyrin sensitizers. DSCs that were based on these new porphyrins showed an overall power‐conversion efficiency of about 4.0 % under full sunlight (AM 1.5G, 100 mW cm^?2).     

Diketopyrrolopyrrole?Thiophene‐Based Acceptor–Donor–Acceptor Conjugated Materials for High‐Performance Field‐Effect Transistors

We report the synthesis, morphology, and field‐effect‐transistor (FET) characteristics of new acceptor–donor–acceptor conjugated materials that consist of diketopyrrolopyrrole (DPP) acceptor groups and one of four different thiophene moieties, that is, dithiophene (2T), thieno[3,2‐b]‐thiophene (TT), dithieno[3,2‐b:2′,3′‐d]‐thiophene (DTT), and 5,5′′′‐di‐(2‐ethylhexyl)‐[2,3′;5′,2′′;4′′,2′′′]quaterthiophene (4T). The optical band gaps of the as‐prepared materials are smaller than 1.7 eV, which is attributed to the strong intramolecular charge transfer and the backbone coplanarity of the thiophene moieties. The order of both crystallinity and FET mobility (×10^?2–×10^?4 cm² V^?1 s^?1) is TT2DPP > 4T2DPP > 2T2DPP >DTT2DP, which differ in the structure of the π‐conjugated cores and core symmetry. Well‐ordered intermolecular chain packing was confirmed by the GIXD and AFM results. In particular, the FET hole mobility of TT2DPP was further improved to 0.1 cm² V^?1 s^?1, which was attributed to the well‐interconnected structure through solution‐shearing. These experimental results suggest the potential applications of the new DPP? thiophene? DPP conjugated materials for organic electronic devices.     

水在HfO2(111)和(110)表面的吸附与解离

运用广义梯度近似密度泛函理论方法(GGA-PW91)结合周期平板模型, 研究水分子在二氧化铪(111)和(110)表面不同吸附位置在不同覆盖度下的吸附行为. 通过比较不同吸附位的吸附能和几何构型参数发现:(111)和(110)表面铪原子(top 位)是活性吸附位. 水分子与表面的吸附能值随覆盖度的变化影响较小. 在(111)和(110)表面, 水分子都倾向以氧端与表面铪原子相互作用. 同时也计算了羟基、氧和氢在表面的吸附, Mulliken 电荷布居, 态密度及部分频率. 结果表明, 在两种表面羟基以氧端与表面铪相互作用, 氧原子与表面铪和氧原子同时成键, 而氢原子直接与表面氧原子相互作用形成羟基. 通过过渡态搜索, 水分子在(111)和(110)表面发生解离, 反应能垒分别为9.7和17.3 kJ·mol^-1, 且放热为59.9和47.6 kJ·mol^-1.     

反相悬浮聚合法制备球状卡波树脂的研究

以偶氮二异丁脒盐酸盐(V50)作为引发剂,失水山梨醇硬脂酸酯(Span60)和聚二甲基硅氧烷PEG-7磷酸酯为复合分散剂,蔗糖烯丙基醚和三甲基丙基聚氧乙烯(15)醚三丙烯酸酯为复合交联剂,丙烯酸为单体,正已烷为反应介质,采用反相悬浮聚合方法制备了球状卡波树脂.用光学显微镜和扫描电镜分别对聚合反应的成粒过程和产物的形貌进行了研究.结果表明,聚合体系呈现典型的悬浮聚合相态特征,并获得了堆积密度较高(0.65 g/cm3)的球状卡波树脂.聚合反应动力学研究结果表明,该反相悬浮聚合的聚合速率对单体浓度和引发剂浓度的反应级数分别约为1.36和0.70;聚合反应的表观活化能为78.0 kJ/mol.交联剂对卡波树脂的性能有重要的影响,通过适度交联可提高产物的增稠效率及其抗剪切性能.     

Sensitive chemiluminescence aptasensor based on exonuclease-assisted recycling amplification

We report herein an exonuclease-assisted aptamer-based target recycling amplification strategy for sensitive and selective chemiluminescence (CL) determination of adenosine. This aptasensor is based on target-induced release of aptamers from capture probes immobilized on the 96-well plate surface, and thus leading to a decreased hybridization with gold nanoparticle-functionalized reporter sequences followed by a CL signal. The introduction of exonuclease III catalyzes the stepwise removal of mononucleotides from 3′-hydroxyl termini of duplex DNAs of aptamers, liberating the adenosine. Therefore, a single copy of target adenosine can lead to the release and digestion of numerous aptamer strands from the 96-well plates and ultimately an enhanced sensitivity is achieved. Experimental results revealed that the exonuclease-assisted recycling strategy enabled the monitoring of adenosine with wide working ranges and low detection limits (LOD: 0.5 nM). This new CL strategy might create a novel technology for the detection of various targets and could find wide applications in the environmental and biomedical fields.     

蒸汽活化生物质焦吸附模拟烟气中SO2和NO的研究

以麦秆和稻壳生物质为研究对象,在不同的热解温度、热解速率以及蒸汽活化温度条件下制备了生物质焦,采用比表面积与孔隙度分析仪测定生物质焦的比表面积和孔隙结构参数。利用固定床吸附装置,研究了热解温度、热解速率、活化温度和模拟烟气中SO₂和NO浓度等因素对生物质焦吸附SO₂和NO性能的影响。结果表明,蒸汽活化可以显著提高生物质焦的BET比表面积、D-R比表面积、D-R微孔容积和总孔容,降低其平均孔径,并显著增加蒸汽活化生物质焦对SO₂与NO吸附的起始穿透时间和吸附量。快速热解下制得的蒸汽活化焦对SO₂和NO的吸附效果优于慢速热解,热解温度为873 K的蒸汽活化焦的吸附性能明显好于热解温度为673与1 073 K的蒸汽活化焦。在973~1 173 K下,随着蒸汽活化温度的提高,蒸汽活化生物质焦对SO₂和NO的吸附量呈现先上升后下降的趋势。随着模拟烟气中SO₂与NO浓度的降低,蒸汽活化生物质焦对SO₂与NO吸附的起始穿透时间延长,但相应的SO₂和NO吸附量下降。在873 K、快速热解和1 073 K条件下制得的蒸汽活化麦秆焦对SO₂和NO吸附量最大,其值分别为109.02和21.77 mg/g。     

Determination of the reaction heat and studies of thermodynamic functions

The hydrolytic polymerization of Cr³⁺ at relatively high concentrations was studied by microcalorimetry. The thermal curves were determined with a 2277 thermal activity monitor. From the curves, the identified reaction heats (δrH _m ^σ ), hydrolysis constants (K) and thermodynamic functions (δrS _m ^σ ,δrH _m ^σ ) were calculated at different temperatures.     

抚州秀谷茶场茶叶中微量元素分析

对抚州地区秀茶场产的茶叶进行了微量元素测定，提供了五种茶的微量元素谱，同时还对比了秀谷茶场产茶和英德红茶中的微量元素含量的差异。