Microstructure of laser melted Al18B4O33w/2024Al composite

The microstructure of a laser treated Al₁₈B₄O₃₃w/2024Al composite has been investigated using transmission electron microscope (TEM), low-angle (glancing angle) X-ray diffraction (XRD) techniques. Various surface microstructures were observed in the laser treated composite. The Al₁₈B₄O₃₃ whisker on the surface of the composite was decomposed during laser surface melting, various decomposition products were studied in the laser treated composite. Eutectic phases and the precipitation in the matrix of the composite with laser-treated were observed. The main phases detected in the molten zone were aluminum and decomposition products Al₂O₃. The effect of laser treatment on the hardness of the composite was also examined. A surface hardness of 400 Hv was noted.     

森林发展系统的一个非线性半离散模型

本文建立了森林发展系统的一类非线性林龄面积结构的半离散模型 ,并讨论了半离散系统解的存在唯一性 ,给出了线性半离散系统稳定的一些充分条件     

Interior point cutting plane method for optimal power flow

In this paper, an interior point cutting plane method (IPCPM)is applied to solve optimal power flow (OPF) problems. Comparedwith the simplex cutting plane method (SCPM), the IPCPM is simpler,and efficient because of its polynomial-time characteristic.Issues in implementing IPCPM for OPF problems are addressed,including (1) how to generate cutting planes without using thesimplex tableau, (2) how to identify the basis variables inIPCPM, and (3) how to generate mixed integer cutting planes.The calculation speed of the proposed algorithm is further enhancedby utilizing the sparsity features of the OPF formulation. Numericalsimulations on IEEE 14-300-bus test systems have shown thatthe proposed method is effective.     

Study on deactivation and regeneration of Pd/Al2O3 catalyst in hydrogen peroxide production by the anthraquinone process

Deactivated palladium catalysts in the hydrogenation of anthraquinione were regenerated with ethanol, nitric acid, hydrogen peroxide, boiling water and steam, respectively. The deactivated and regenerated catalysts were characterized by XPS, ICP, TG, FTIR, TPD, XRD, etc., and studied in the hydrogenation of anthraquinone. The results showed that the main cause of catalyst deactivation is the coverage of the active component by deposits. The treatments by hydrogen peroxide and boiling water can effectively regenerate the deactivated catalysts. This revised version was published online in August 2006 with corrections to the Cover Date.     

神光Ⅱ上柱形黑腔辐射驱动冲击波

利用神光Ⅱ的八路三倍频激光装置，驱动柱形黑腔产生的x 射线作辐射源驱动台阶铝样品产生冲击波，获得了清晰的冲击波图像，通过冲击波过台阶样 品的时间差获得冲击波速度和压力分别为31.2km/s和17.5×10⁵MPa.采用软x射线能谱 仪通过激光注入孔测量的辐射温度与采用冲击波法测量辐射温度的结果一致. 关键词： 冲击波 辐射驱动 辐射温度     

用改进嵌入原子法计算Cu晶体的表面能

用改进嵌入原子法(MEAM)计算了Cu晶体12个晶面的表面能.结果表明，密排面(111)的表面能最小.其他晶面的表面能随其晶面与(111)晶面夹角的增加而增加，据此可以粗略地估计各晶面表面能的相对大小.给出的几何结构因子的确定方法及结果可以直接用于计算其他面心立方晶体的表面能及其他特性.在Cu,Ag等面心立方薄膜中出现(111)择优取向或织构的机理是表面能的最小化. 关键词： 改进嵌入原子法 铜 表面能 计算     

某些类氖离子和类镍离子等离子体状态对应关系的研究

利用一维拉格朗日流体动力学程序Med103详细研究了产生类镍Ag,Cd,In,Sn, Sb离子和类氖Fe,Co,Ni,Cu,Zn离子的等离子体状态.通过对电子温度、离子丰度、离子数密度等状态参量的分析比较，得到了这两类等离子体状态之间的对应关系.即类镍银的等离子体状态与类氖铁 的相近，类镍镉的与类氖钴的相近，依次类推.利用这一对应关系可以方便地由类氖机理x射线激光的等离子体状态来对相应元素的类镍x射线激光的等离子体状态进行判断. 关键词： 类氖 类镍 等离子体状态 x射线激光     

质子化丙酮分子团簇的结构和振动光谱

用密度泛函B3LYP/ 6 3 1G(d)方法 ,对质子化丙酮分子团簇 (CH3COCH3) nH+ (n =1～ 7)弱相互作用体系进行了全自由度能量梯度优化 ,得到了该系列团簇的稳定结构及其对应的体系能量 .通过对构型的分析得出了质子化丙酮分子团簇 (CH3COCH3) nH+ (n =1～ 7)的生长规律 .计算了中性丙酮分子团簇体系的质子亲合能并总结出其变化趋势 .分析讨论了质子化团簇的红外振动光谱 ,发现质子化团簇的振动光谱普遍较中性环型团簇的振动光谱复杂 ,最强的振动峰来源于质子在溶剂壳中两个氧原子之间的振动 ,而且随着团簇尺寸的增加羰基的伸缩振动峰的数目也随之增多     

吡罗红为底物的辣根过氧化物酶催化荧光反应测定葡萄糖

吡罗红在辣根过氧化物酶催化下可被过氧化氢氧化而使其荧光猝灭。在pH 7.2中性介质中,稳态催化速率由酶和底物浓度决定,催化体系服从Michaelis-Menten方程,用Lineweaver-Burk作图法求得米氏常数、最大反应速度、催化常数分别为2.4×10~(-5)mol·L-1,2.5×10~(-6)mol·L-1s-1,75.8 s-1。在最佳反应条件下,荧光F0/F的猝灭程度与过氧化氢浓度在0-3.6×10~(-7)mol·L-1范围内成线性关系,检测限为6.3×10~(-9)mol·L-1;当与葡萄糖氧化酶联用时,可定量检测葡萄糖,线性关系为0-8.0×10~(-7)mol·L-1,检测限为3.4×10~(-8)mol·L-1。方法用于分析人血清中葡萄糖含量,分析结果与苯酚-4-氨基安替比林法基本一致。     

A new regioselective synthesis and bioactivity of 1H‐pyrazolo[3,4‐d]pyrimidin‐4(5H)‐one derivatives

A series of new 1H‐pyrazolo[3,4‐d]pyrimidin‐4(5H)‐one Derivatives 5 has been designed and regio‐selectively synthesized via a tandem aza‐Wittig reaction. The structures of all compounds prepared have been confirmed by ¹H NMR, IR, EI‐MS spectroscopy and elemental analyses. The results of preliminary bioassay indicate that most compounds 5 possess an inhibition effect against Botrytis cinereapers and Pyricularia oryzae at the concentration of 50 mg/L.