Improved rapid assay of plasma uric acid by short-end injection capillary zone electrophoresis

A rapid and simple short-end injection capillary zone electrophoresis method was developed for the quantification of plasma uric acid. The separation was performed in an uncoated fused-silica capillary (50 μm ID, 60 cm total length, 10.2 cm effective length) by using as a background electrolyte a 75 mmol/L glycylglycine solution titrated with NaOH 5 mol/L to pH 9.0, a voltage of 28 kV, a cartridge temperature of 15 °C, and direct UV detection at 292 nm. Under optimized conditions, uric acid was determinate in little more than 1 min (1.076 minutes). In order to verify the accuracy of the analysis, urate levels were measured in 543 apparently healthy volunteers by the new assay and our previous method, and the obtained data were compared by Passing–Bablock regression, Bland–Altman test, and a new regression-based approach, which showed a good agreement between two methods.     

Enrichment from activated sludges of aerobic mixed cultures capable to degrade vinyl chloride (VC) as the sole carbon source

Two microbial cultures able to degrade high concentrations of VC as the sole carbon source have been obtained by enrichment from activated sludge. The cultures began consuming VC (0.02 mmol l(-1)) only after a long initial acclimation period (1-2 months). After then the concentration of VC was gradually increased (from 0.02 to 0.8 mmol l(-1)) and the cultures were able to maintain VC degrading ability for long time (over 500 days). VC-degrading biomass in the two cultures was characterized by low specific maximum growth rates (0.19-0.21 d(-1)) compared to heterotrophic organisms typically present in activated sludge processes. Monod half-saturation constant was rather low (0.7-1.6 mg VC l(-1)) indicating that it is possible to effectively remove VC to low residual concentrations. The cultures were highly sensitive to even short periods of VC lack (with quick decrease of VC degradation rates) whereas they were not to sudden load increases (up to 3.4 mmol l(-1)). After being cultured with only ethene as the sole carbon and energy source, the cultures kept the ability of degrading VC. Possibility of maintaining the mixed cultures on non-toxic ethene, without loosing VC degradation ability, is very promising for bioaugmentation treatments.     

Growth and fire resistance of colloidal silica-polyelectrolyte thin film assemblies

Thin films of colloidal silica were deposited on cotton fibers via layer-by-layer (LbL) assembly in an effort to reduce the flammability of cotton fabric. Negatively charged silica nanoparticles of two different sizes (8 and 27 nm) were paired with either positively charged silica (12 nm) or cationic polyethylenimine (PEI). PEI/silica films were thicker due to better (more uniform) deposition of silica particles that contributed to more than 90% of the film weight. Each coating was evaluated at 10 and 20 bilayers (BL). All coated fabrics retained their weave structure after being exposed to a vertical flame test, while uncoated cotton was completely destroyed. Micro combustion calorimetry confirmed that coated fabrics exhibited a reduced peak heat release rate, by as much as 20% relative to the uncoated control. The 10 BL PEI-8 nm silica recipe was the most effective because the coating is relatively thick and uniform relative to the other systems. Soaking cotton in basic water (pH 10) prior to deposition resulted in better assembly adhesion and flame-retardant behavior. These results demonstrate that LbL assembly is a useful technique for imparting flame retardant properties through conformal coating of complex substrates like cotton fabric.     

Probing the Roughness of Porphyrin Thin Films with X-ray Photoelectron Spectroscopy

Thin-film growth of molecular systems is of interest for many applications, such as for instance organic electronics. In this study, we demonstrate how X-ray photoelectron spectroscopy (XPS) can be used to study the growth behavior of such molecular systems. In XPS, coverages are often calculated assuming a uniform thickness across a surface. This results in an error for rough films, and the magnitude of this error depends on the kinetic energy of the photoelectrons analyzed. We have used this kinetic-energy dependency to estimate the roughnesses of thin porphyrin films grown on rutile TiO₂(110). We used two different molecules: cobalt (II) monocarboxyphenyl-10,15,20-triphenylporphyrin (CoMCTPP), with carboxylic-acid anchor groups, and cobalt (II) tetraphenylporphyrin (CoTPP), without anchor groups. We find CoMCTPP to grow as rough films at room temperature across the studied coverage range, whereas for CoTPP the first two layers remain smooth and even; depositing additional CoTPP results in rough films. Although, XPS is not a common technique for measuring roughness, it is fast and provides information of both roughness and thickness in one measurement.     

Epidemics and chaotic synchronization in recombining monogamous populations

We analyze the critical transitions (a) to endemic states in an SIS epidemiological model, and (b) to full synchronization in an ensemble of coupled chaotic maps, on networks where, at any given time, each node is connected to just one neighbour. In these “monogamous” populations, the lack of connectivity in the instantaneous interaction pattern—that would prevent both the propagation of an infection and the collective entrainment into synchronization—is compensated by occasional random reconnections which recombine interacting couples by exchanging their partners. The transitions to endemic states and to synchronization are recovered if the recombination rate is sufficiently large, thus giving rise to a bifurcation as this rate varies. We study this new critical phenomenon both analytically and numerically.     

Bovine lactoferrin purification from whey using Yellow HE‐4R as the chromatographic affinity ligand

The worldwide production of whey increases by around 186 million tons each year and it is generally considered as a waste, even when several whey proteins have important economic relevance. For its valorization, inexpensive ligands and integrated chromatography methods need to be developed for specific and low‐cost protein purification. Here, we describe a novel affinity process with the dye Yellow HE‐4R immobilized on Sepharose for bovine lactoferrin purification. This approach based on a low‐cost ligand showed an efficient performance for the recovery and purification of bovine lactoferrin directly from whey, with a yield of 71% and a purification factor of 61.     

Homogenization of magneto-electro-elastic multilaminated materials

In this work, based on the periodic unfolding homogenizationtechnique, the limiting equations modelling the behaviour ofthree-dimensional magneto-electro-elastic periodic structuresare rigorously established. The local problems and the correspondinghomogenized coefficients of the elastic, dielectric, magneticpermittivity, piezoelectric, piezomagnetic and magneto-electric(ME) tensors are explicitly described. The homogenization modelis exemplified for laminated composites and a unified generalformula for all effective properties of periodic multilaminatedmagneto-electro-elastic composites is obtained. This formulais applied to investigate the global behaviour for the importantcase of transversely isotropic constituents and any finite numberof layers in each periodic cell. Examples that provide theoreticalevidence of the presence of both a product property and theME effect are given.     

On continuation of inviscid vortex patches

This investigation concerns solutions of the steady-state Euler equations in two dimensions featuring finite area regions with constant vorticity embedded in a potential flow. Using elementary methods of the functional analysis we derive precise conditions under which such solutions can be uniquely continued with respect to their parameters, valid also in the presence of the Kutta condition concerning a fixed separation point. Our approach is based on the Implicit Function Theorem and perturbation equations derived using shape-differentiation methods. These theoretical results are illustrated with careful numerical computations carried out using the Steklov–Poincaré method which show the existence of a global manifold of solutions connecting the point vortex and the Prandtl–Batchelor solution, each of which satisfies the Kutta condition.