Indication of reactor ν(e) disappearance in the Double Chooz experiment

The Double Chooz experiment presents an indication of reactor electron antineutrino disappearance consistent with neutrino oscillations. An observed-to-predicted ratio of events of 0.944±0.016(stat)±0.040(syst) was obtained in 101 days of running at the Chooz nuclear power plant in France, with two 4.25 GW(th) reactors. The results were obtained from a single 10 m(3) fiducial volume detector located 1050 m from the two reactor cores. The reactor antineutrino flux prediction used the Bugey4 flux measurement after correction for differences in core composition. The deficit can be interpreted as an indication of a nonzero value of the still unmeasured neutrino mixing parameter sin(2)2θ(13). Analyzing both the rate of the prompt positrons and their energy spectrum, we find sin(2)2θ(13)=0.086±0.041(stat)±0.030(syst), or, at 90% C.L., 0.017相似文献   

Relating field theories via stochastic quantization

This note aims to subsume several apparently unrelated models under a common framework. Several examples of well-known quantum field theories are listed which are connected via stochastic quantization. We highlight the fact that the quantization method used to obtain the quantum crystal is a discrete analog of stochastic quantization. This model is of interest for string theory, since the (classical) melting crystal corner is related to the topological A-model. We outline several ideas for interpreting the quantum crystal on the string theory side of the correspondence, exploring interpretations in the Wheeler–De Witt framework and in terms of a non-Lorentz invariant limit of topological M-theory.     

Silica‐Coating of Hematite Nanoparticles Using Reactive Water‐Soluble Polyalkoxysiloxanes

In this article, we report on a new one‐step synthetic route to obtain multi‐functional silica‐coated hematite particles using a water‐based surfactant‐free technology. The synthesis and properties of uniform silica‐coated hematite particles with adjustable size, morphology, and silica shell thickness are discussed in detail. The developed method allows simultaneous formation of the silica shell around hematite core and incorporation of reactive groups on the surface of core–shell nanoparticles. Vinyl groups are introduced to the silica surface at once by pre‐functionalization of a water‐soluble hyperbranched polyalkoxysiloxanes with active double bonds. The reactivity of these surface‐immobilized vinyl groups is demonstrated by covalent attachment of rhodamine B using a thiol‐en click reaction.     

Spatial and temporal resolution effects on dynamic contrast-enhanced magnetic resonance mammography

We tested the hypothesis that partial volume effects due to poor in-plane resolution and/or low temporal resolution used in clinical dynamic contrast-enhanced magnetic resonance imaging results in erroneous diagnostic information based on inaccurate estimates of tumor contrast agent extravasation and tested whether reduced encoding techniques can correct for dynamic data volume averaging. Image spatial resolution was reduced from 469 x 469 microm2 to those reported below by selecting a subset of k-space data. We then compared the top five K(trans)/V(T) "hot spots" obtained from the original data set, 469 x 469-microm in-plane spatial resolution and an 18-s temporal resolution processed by fast Fourier transform (FFT), with values obtained from data sets having in-plane spatial resolutions of 938 x 938, 1875 x 1875 and 2500 x 2500 microm2 and a temporal resolution of 18 s, or data sets with temporal resolutions of 36, 54 and 72 and a spatial resolution of 469 x 469 microm2, and found them to statistically differ from the parent data sets. We then tested four different post processing methods for improving the spatial resolution without sacrificing temporal resolution: zero-filled FFT, keyhole, reduced-encoding imaging by generalized-series reconstruction (RIGR) and two-reference RIGR (TRIGR). The top five values of K(trans)/V(T) obtained from data sets, the in-plane spatial resolutions of which were improved to 469 x 469 microm2 by zero-filling FFT, Keyhole and RIGR, statistically differed from those obtained from the original 469 x 469 microm2 FFT parent image data set. Only the 938 x 938 and 1875 x 1875 microm2 data sets reconstructed to 469 x 469 microm2 with TRIGR reconstruction method yielded values of the top five K(trans)/V(T) hot spots statistically the same as the original parent data set, 469 x 469 microm2 in-plane spatial and 18-s temporal-resolution FFT. That is, partial volume effects from data sets of different in-plane spatial resolution resulted in statistically different values of the top five K(trans)/V(T) hot spots relative to a high spatial and temporal resolution data set, and TRIGR reconstruction of these low resolution data sets to high resolution images provided statistically similar values with a savings in temporal resolution of 2 to 4 times.     

The Gauge–Bethe Correspondence and Geometric Representation Theory

The Gauge/Bethe correspondence of Nekrasov and Shatashvili relates the spectrum of integrable spin chains to the ground states of supersymmetric gauge theories. Up to now, this correspondence has been an observation; the underlying reason for its existence remaining elusive. We argue here that geometrical representation theory is a mathematical foundation of the Gauge/Bethe correspondence, and it provides a framework to study families of gauge theories in a unified way.     

Asynchronous sampling for ultrafast experiments with low momentum compaction at the ANKA ring

A high‐repetition‐rate pump–probe experiment is presented, based on the asynchronous sampling approach. The low‐α mode at the synchrotron ANKA can be used for a time resolution down to the picosecond limit for the time‐domain sampling of the coherent THz emission as well as for hard X‐ray pump–probe experiments, which probe structural dynamics in the condensed phase. It is shown that a synchronization of better than 1 ps is achieved, and examples of phonon dynamics of semiconductors are presented.     

Crystalline Pr:SrAl12O19 waveguide laser in the visible spectral region

We fabricated waveguides in Pr:SrAl(12)O(19) crystals by direct femtosecond laser writing. The propagation losses were calculated to be as low as 0.16 dB/cm at a wavelength of 633 nm. Laser oscillation in a diode-pumped waveguide at a wavelength of 643.5 nm was realized. The output power of the waveguide laser was 28.1 mW at a slope efficiency of 8%.     

Experimental implementation of ultrashort laser pulses in the von Neumann picture

The characterization and interpretation of ultrashort laser pulses is most intuitive in the joint time–frequency domain, where structures like multiple pulses become immediately apparent. For practical reasons, ultrafast femtosecond laser pulse shaping, however, is commonly carried out in the frequency domain. Here we implement pulse shaping of optical fields defined in the von Neumann representation, which is a joint time–frequency distribution with complex-valued Gaussian basis functions. We discuss the feasibility as well as the principal limitations of this technique, show illustrative examples, and propose possible applications in coherent control.     

Comparison of tumor histology to dynamic contrast enhanced magnetic resonance imaging-based physiological estimates

Purpose

The purpose of this study was to compare histologically determined cellularity and extracellular space to dynamic contrast-enhanced magnetic resonance imaging (DCE MRI)-based maps of a two-compartment model's parameters describing tumor contrast agent extravasation, specifically tumor extravascular extracellular space (EES) volume fraction (v_e), tumor plasma volume fraction (v_p) and volume-normalized contrast agent transfer rate between tumor plasma and interstitium (K_TRANS/V_T).

Materials and Methods

Obtained v_e, v_p and K_TRANS/V_T maps were estimated from gadolinium diethylenetriamine penta-acetic acid DCE T₁-weighted gradient-echo images at resolutions of 469, 938 and 2500 μm. These parameter maps were compared at each resolution to histologically determined tumor type, and the high-resolution 469-μm maps were compared with automated cell counting using Otsu's method and a color-thresholding method for estimated intracellular (V_{intracellular}) and extracellular (V_{extracellular}) space fractions.

Results

The top five K_TRANS/V_T values obtained from each tumor at 469 and 938 μm resolutions are significantly different from those obtained at 2500 μm (P<.0001) and from one another (P=.0014). Using these top five K_TRANS/V_T values and the corresponding tumor EES volume fractions v_e, we can statistically differentiate invasive ductal carcinomas from noninvasive papillary carcinomas for the 469- and 938-μm resolutions (P=.0017 and P=.0047, respectively), but not for the 2500-μm resolution (P=.9008). The color-thresholding method demonstrated that v_e measured by DCE MRI is statistically similar to histologically determined EES. The V_{extracellular} obtained from the color-thresholding method was statistically similar to the v_e measured with DCE MRI for the top 10 K_TRANS/V_T values (P>.05). DCE MRI-based K_TRANS/V_T estimates are not statistically correlated with histologically determined cellularity.

Conclusion

DCE MRI estimates of tumor physiology are a limited representation of tumor histological features. Extracellular spaces measured by both DCE MRI and microscopic analysis are statistically similar. Tumor typing by DCE MRI is spatial resolution dependent, as lower resolutions average out contributions to voxel-based estimates of K_TRANS/V_T. Thus, an appropriate resolution window is essential for DCE MRI tumor diagnosis. Within this resolution window, the top K_TRANS/V_T values with corresponding v_e are diagnostic for the tumor types analyzed in this study.     

Embedding optimisation algorithms with Mosel

Algebraic modelling languages allow models to be implemented in such a way that they can easily be understood and modified. They are therefore a working environment commonly used by practitioners in Operations Research. Having once developed models, they need to be integrated inside the company information system. This step often involves embedding a model into a programming language environment: many existing algebraic modelling languages make possible to run parameterised models and subsequently retrieve their results, but without any facility for interacting with the model during the model generation or solution process.In this paper we show how to use the Mosel environment to implement complex algorithms directly in the modelling language.The Office cleaning problem is solved by a branch-and-cut algorithm, implemented entirely in the modelling language (including the definition of the callback function for the solver). Secondly, a cutting stock problem is solved by column generation, also implemented in the modelling language.AMS classification: 90Cxx, 65K05, 68N15