Preparation of chitosan–polyethylene glycol coated cotton membranes for wound dressings: preparation and characterization

Cotton fabric was coated with chitosan (CS) and polyethylene glycol (PEG) followed by freeze‐drying. The influence of PEG on the physical characteristics and the surface morphology was investigated. The scanning electron microscopy of the coated fabric revealed a porous structure. The porosity of the material was 54–70% and the pore size was in the range of 75–120µm. The increase in the PEG content in the blend composition led to an enhanced destabilization of pores, leading to an increase in the pore size with elongated morphology. There seems to be phase separation between the two components which is an important factor for the observed behavior of the porous structure. The Fourier transform infrared spectroscopy (FTIR) and differential scanning calorimetry (DSC) showed that the CS and PEG have limited interaction. DSC suggested that addition of PEG to CS does not interfere with the crystallization behavior due to limited interaction with CS. The thermogravimetric analysis (TGA) showed that the membranes are thermally stable and PEG enhances the thermal stability of the CS coated membranes. The air and water permeability of the membranes tended to decrease with the increase in the PEG content. Copyright © 2008 John Wiley & Sons, Ltd.     

Assessment of Environmental Quantitative Variation of Diosgenin in Fenugreek Seeds via High-Performance Thin-Layer Chromatography Method

JPC – Journal of Planar Chromatography – Modern TLC - Fenugreek is one of the oldest medicinal plants known by mankind. The aim of this study is to evaluate the effect of environmental...     

Synthesis and characterization of radiation grafted films for removal of arsenic and some heavy metals from contaminated water

Grafting of styrene/maleic anhydride and methyl methacrylate/maleic anhydride binary monomers onto the low density polyethylene film was performed using the γ-ray irradiation technique. Then, the synthesized grafted films were treated with different ammonia derivatives for developing chelating functionalization. These chelating products were characterized by the gravimetric method as well as by the Fourier transformed infrared spectroscopic method, and were used for removal of arsenic and some heavy metals from aqueous solutions. The optimum absorbed dose of 30 kGy reveals the graft yielding of about 325% in the films. Uptake of arsenic and some heavy-metal ions (Cr(III), Mn(II), Fe(III), Ni(II), Cu(II) and Pb(II)) from contaminated water by the chelating functionalized films (CFF) was examined by an atomic absorption spectrophotometer. The maximum arsenic removal capacity of 5062 mg/kg has been observed for the film treated with hydroxylamine hydrochloride. The CFF prepared by semicarbazide and thiol analogs show affinity toward the metal ions with an order: Cu(II)>Fe(III)>Mn(II) etc. The results obtained from this study indicate that the functionalized films show good chelating and ion-exchange property for metal ions.     

Antitussive and toxicological evaluation of Vitex negundo

Vitex negundo Linn. (Verbenaceae) is used in traditional medical system for respiratory disorders. This study was carried out to investigate its cough-relieving potential. The antitussive effect of the butanolic extract of V. negundo (Vn) on sulphur dioxide (SO(2))-induced cough was examined in mice. Safety profile of Vn was carried out by observing acute neurotoxicity, median lethal dose (LD(50)) and behavioural signs. Vn dose-dependently (250-1000?mg?kg(-1)) inhibited the cough provoked by SO(2) gas in mice and exhibited maximum protection after 60?min of administration. At 1000?mg?kg(-1), Vn caused maximum cough-suppressive effects i.e. cough inhibition at 60?min was 67.4%, as compared to codeine (10?mg?kg(-1)), dextromethorphan (10?mg?kg(-1)) and saline having cough-inhibitory potential 75.7%, 74.7% and 0%, respectively. LD(50) value of V. negundo was found to be greater than 5000?mg?kg(-1). In toxicity tests, no signs of neural impairment and acute behavioural toxicity were observed at antitussive doses and extract has been well tolerated at higher doses. These results indicate that V. negundo exhibits antitussive effect and it was found devoid of toxicity.     

From clusters to ionic complexes: structurally characterized thallium titanium double alkoxides

A series of sterically varied titanium alkoxides [[Ti(OR)(4)](n)(), n = 4, OR = OCH(2)CH(3) (OEt); n = 1, OCH(CH(3))(2) (OPr(i)); n = 2, OCH(2)C(CH(3))(3) (ONep); n = 1, OC(6)H(3)(CH(3))(2)-2,6 (DMP)] were reacted with a series of thallium alkoxides [[Tl(OR)](x) (x = 4, OR = OEt, ONep; n = infinity, DMP)]. The resultant products of the [Tl(mu(3)-OEt)](4)-modified [Ti(OR)(4)](n)() (OR = OEt, OPr(i), ONep) were found by X-ray analysis to be Tl(4)Ti(2)(mu-O)(mu(3)-OEt)(8)(OEt)(2) (1), Tl(4)Ti(2)(mu-O)(mu(3)-OPr(i))(5)(mu(3)-OEt)(3)(OEt)(2) (2), and TlTi(2)(mu(3)-OEt)(2)(mu-OEt)(mu-ONep)(2)(ONep)(4) (3), respectively. The reaction of [Tl(mu(3)-OEt)](4), 12HOEt, and 4[Ti(mu-ONep)ONep)(3)](2) to generate 3 in a higher yield resulted in the isolation of TlTi(2)(mu(3)-OEt)(mu(3)-ONep)(mu-OEt)(mu-ONep)(2)(ONep)(4) (4). Compounds 1 and 2 possess an octahedral (Oh) arrangement of two Ti and four Tl metal atoms around a mu-O central oxide atom (the Tl-O distance is too long to be considered a bond). For both compounds, each Ti atom adopts a distorted Oh geometry with one terminal OEt ligand. The Tl atoms are formally 4-coordinated, adopting a distorted pyramidal geometry using four mu(3)-OR (OR = OEt or OPr(i)) ligands to complete their coordination sphere. The Tl atoms reside approximately 1.4 A below the basal plane of oxygens. In contrast to these structures, both 3 and 4 utilize ONep ligands and display reduced oligomerization yielding trinuclear complexes without oxo formation. The two Ti cations are Oh, and the single Tl cation is in a formal distorted pyramidal (PYD) arrangement. If the lone pair of the Tl cations are considered in the geometry, each Tl adopts a square base pyramidal geometry. Two terminal ONep ligands are bound to each Ti with the remainder of the molecule consisting of mu(3)- and mu-ONep ligands. The reaction of [Tl(mu(3)-ONep)](4) with two equivalents of [Ti(mu-ONep)(ONep)(3)](2) also led to the isolation of the homoleptic trinuclear complex TlTi(2)(mu(3)-ONep)(2)(mu-ONep)(3)(ONep)(4) (5) which is analogous in structure to the mixed ligand species of 3 and 4. Each Ti is Oh coordinated with six ONep ligands, and the single Tl is PYD bound by ONep ligands. A further increase in the steric bulk of the pendant ligands, using [Tl(mu-DMP)](infinity) and [Ti(mu-ONep)(ONep)(3)](2), resulted in a further decrease in the nuclearity yielding the dinuclear species TlTi(mu-DMP)(mu-ONep)(DMP)(ONep)(2) (6). For 6, the two metals are bound by a mu-ONep and a mu-DMP ligand. The Tl metal center was solved in a bent geometry while the Ti adopted a distorted trigonal bipyramidal (TBP) geometry using three ONep and two DMP ligands to fill its coordination sphere. Further increasing the steric bulk of the ancillary ligands using Ti(DMP)(4) and [Tl(mu-DMP)](infinity) led to the formation of [Tl(+)][(-)(eta(2-3)-DMP)Ti(DMP)(4)] (7). The Ti metal center is in a TBP geometry, and the "naked" Tl cation resides unencumbered by solvent molecules but was found to have a strong pi-interaction with four DMP ligands of neighboring Ti(DMP)(5)(-) anions. For this novel set of compounds, (205)Tl NMR spectroscopy was used to investigate the solution behavior of these compounds. Multiple (205)Tl resonances were observed for the solution spectra of the crystalline material of 1-6, and a broad singlet was observed for 7. The large number of minor resonances noted for these compounds was attributed to sensitivity of the Tl cation based on small variations due to ligand rearrangement. However, the major resonance noted in the (205)Tl NMR solution spectra of 1-7 are in agreement with their respective solid-state structures.     

Free‐volume variation in polyethylenes of different crystallinities: Positron lifetime,density, and X‐ray studies

High‐quality positron lifetime measurements (70 million total counts) are reported for polyethylenes (PEs) of different crystallinities (X_c = 3–82%). The specific volumes of the crystalline and amorphous phases (V_c and V_a, respectively) were estimated from density and wide‐angle X‐ray scattering (WAXS) experiments. Some samples (those with low values of X_c) were branched PEs, and those with high values of X_c were linear PEs for which X_c was varied with changes in the crystallization temperature. Both V_c and V_a increase with decreasing X_c in the range 0% ≤ X_c ≤ 56% (the branched PEs) but are constant for X_c ≥ 56% (the linear PEs). The lifetime spectra were analyzed with the MELT and LIFSPECFIT routines. Artifacts that can appear in the spectrum analysis were checked via an analysis of computer‐generated spectra. Four lifetime components appeared in all of the PEs; the two long‐lived ones are attributed to pick‐off annihilation of ortho‐positronium (o‐Ps) in crystalline regions (τ₃) and in holes of the amorphous phase (τ₄). With increasing X_c, τ₃ decreases from about 1.2 to 1 ns, τ₄ decreases from 3.0 to 2.5 ns, and the intensity I₄ decreases from 29 to 0%. An increase in I₃ from 6 to 12% was observed. A comparison with simulations shows that the true I₃ value approaches 0 for X_c → 0%. The decrease in I₄ is weaker than the increase in X_c; this leads to the conclusion that the apparent specific o‐Ps yield in the amorphous phase I₄^Xc increases with X_c. Possible reasons for this surprising results are discussed. The fractional free hole volume [h = (V_a ? V_occ)/V_a, where V_occ is the crystalline occupied volume] was estimated from density and WAXS results. Between X_c = 0 and 56%, h decreases from 0.151 to 0.090, but it does not change further above X_c = 56%. The mean size (v) of the local free volumes (holes) estimated from τ₄ decreases from 200 to 150 ų. The number density of holes (N_h) calculated from these values (N_h = h/v) also decreases from 0.8 to 0.6 nm^?3 in the range 0% ≤ X_c ≤ 56%. The values of V_a, V_c, h, and N_h increase with an increasing degree of branching but do not vary for linear PEs. The possible influence of a crystalline–amorphous interfacial phase (three‐phase model) on the observed lifetime parameters is also discussed. © 2001 John Wiley & Sons, Inc. J Polym Sci Part B: Polym Phys 40: 65–81, 2002     

New and novel organic-inorganic type crystalline ‘polypyrrolel/polyantimonic acid’ composite system: preparation, characterization and analytical applications as a cation-exchange material and Hg(II) ion-selective membrane electrode

A new phase of ‘organic-inorganic’ composite system, polypyrrole polyantimonic acid, prepared by mixing the inorganic precipitate of hydrated antimony oxide with organic conducting polymer i.e., polypyrrole, providing a novel granular form hybrid cation-exchanger suitable for column operation with better chemical and thermal stability, good ion-exchange capacity, reproducibility and selectivity for heavy metals. The physicochemical properties of this material were studied using elemental analyses, AAS, SEM, XRD, FTIR and simultaneous TGA-DTA studies. Ion-exchange capacity, pH-titrations, elution and distribution behavior were also carried out to characterize the material. Distribution studies revealed the cation-exchange material to be highly selective for Hg(II) and its selectivity was performed by achieving some important binary separations like Hg²⁺-Zn²⁺, Hg²⁺-Ni²⁺, Hg²⁺-Cu²⁺, Hg²⁺-Fe³⁺, Hg²⁺-Cd²⁺, Hg²⁺-Mg²⁺ etc. on its column. Using this electroactive composite material, a new heterogeneous precipitate based selective ion-sensitive membrane electrode was fabricated for the determination of Hg(II) ions in solutions. The membrane electrode is mechanically stable, with a quick response time, and can be operated within a wide pH range. The selectivity coefficients for different cations determined by mixed solution method were found to be less than unity The electrode was also found to be satisfactory in electrometric titrations.     

Magnetic alignment of aqueous CTAB in nematic and hexagonal liquid crystalline phases investigated by spin-1 NMR

Spin-1 NMR has been used to characterize the magnetically aligned nematic and hexagonal liquid crystalline phases of aqueous cetyltrimethylammonium bromide (CTAB). A nematic/hexagonal biphasic region has been identified for the first time in this system. The nematic phase is characterized by an order parameter of smaller magnitude and greater temperature dependence. Magnetic alignment kinetic rates of the two phases differ greatly, with the nematic phase showing magnetic alignment much faster than the hexagonal phase. Equilibration has been monitored over time by measuring the change in quadrupole splitting as a function of temperature. As the sample equilibrates the temperature dependence of the splitting decreases logarithmically. This work also demonstrates how the phase and order of the liquid crystal can be manipulated during the early part of equilibration.