Electrochemical separation of uranium and cerium in molten LiCl–KCl

The electrochemical separation of uranium from cerium in LiCl–KCl eutectic and the electrochemical behavior of Ce(III) were studied. According to the cyclic voltammogram of Ce(III) and the former result of U(III), electrodeposition potential was determined at ?1.65 V (vs Ag/AgCl). The uranium metal was successfully deposited and separated from cerium. The morphology of deposit and cross section of electrode were investigated by SEM, firstly uranium deposit alloys with stainless steel and forms a thin transition layer, and secondly the uranium metal layer grows from the transition layer. The separation factors of uranium/cerium on different recovery ratios were determined through a series of steps. It was found that the content of cerium in the deposit and separation factors declined with increasing the initial concentration of U³⁺ in molten salts; the separation factors remained stable at around 20 in different uranium recovery ratios.     

Microstructure, distribution and properties of conductive polypyrrole/cellulose fiber composites

Highly intrinsic conductive polypyrrole/cellulose fiber composites (CF) were successfully prepared through in situ chemical oxidation polymerization simply by increasing fiber concentration at the same dosage of pyrrole, oxidant and dopant (based on the weight of dry fiber). FeCl₃ and anthraquinone-2-sulfonic acid sodium salt (AQSNa) were utilized as oxidant and dopant. As fiber concentration increased from 1 % (CF1) to 20 % (CF20), N and S content increased from 0.24 and 0.25 % to 1.24 and 0.89 %, and great increase in the retention of PPy and AQSNa was confirmed by elemental analysis. In addition, on the surface of conductive fiber, PPy of compact fibroid structure was detected instead of interconnected globular structure at higher fiber concentration. Furthermore, scanning transmission electron microscope and X-ray photoelectron spectroscopy (XPS)-depth profile analysis demonstrated denser and more uniformly distributed PPy inside fiber wall for CF20, while PPy tended to deposit on the surface of fiber for CF1. Fourier transform infrared spectroscopy, together with XPS certified that the PPy with longer conjugation length and higher doping level across the conductive fiber was obtained at higher fiber concentration. The doping level for CF10 decreased from 21.55 to 16.39 % with increasing fiber wall thickness, while that of CF20 decreased slightly from 30.73 to 24.10 %. The resulting CF20 showed lowest surface resistivity of 0.433 KΩ/square, as well as improved electro-conductivity stability. The incorporation of more PPy in CF improved the thermal stability.     

Estimation of cellulose nanofibre aspect ratio from measurements of fibre suspension gel point

Cellulose nanofibre aspect ratio controls the properties of sheets made from nanofibres and processing conditions, but aspect ratio is very difficult to measure. In this paper, aspect ratio was estimated from the gel point of a cellulose nanofibre suspension, the solids concentration at which the transition from a dilute to a semi-dilute suspension occurs. Four batches of cellulose nanofibres were tested. Two were produced from softwood fibres using ball milling. Commercially produced microfibrillated cellulose material was also used, both in as supplied form and after removal of the larger fibres by filtering. The average diameter measured from SEM images of fibres ranged from 33 to 73 nm. One sample was too heavily treated and an average dimension could not be measured. The gel-point was measured both from the height of a layer of cellulose nanofibres sedimented from a dilute suspension or from the lowest solids concentration at which a yield stress could be measured using a vane rheometer. The two methods were closely in agreement for all samples. Aspect ratio was then calculated using either the effective medium (EMT) or crowding number (CN) theories. Aspect ratio calculated with an assumed fibre density of 1,500 kg/m³, using the CN theory ranged from 155 to 60. Use of the EMT theory reduced the calculated aspect ratio by between 11 and 23 %. Reducing the assumed density in suspension from 1,500 to 1,166 kg/m³ reduced the calculated aspect ratio by 12–14 %. The heavily treated sample had by far the lowest aspect ratio.     

原子荧光光谱法测定化探样品中的砷和锑

对氢化物原子荧光光谱法测定化探样品中砷和锑元素的分析条件,尤其是浸提法及预还原顺序进行了考察。样品经王水和王水溶液(1+1)分别浸提后以不同顺序预还原,结果表明,王水的氧化性会降低硫脲–抗坏血酸的还原效果,预还原时降低王水浓度能提高测定结果的准确度。在优化的测定条件下,样品中砷、锑测定结果的相对标准偏差分别为0.6%,2.7%;回收率分别为95%～101%,91%～106%;检出限分别为0.020,0.026 ng/mL。改善样品处理方法后测定结果的的准确度得到提高。     

二苯磷酰基取代四苯基硅的合成及在构筑宽禁带聚合物中的应用

设计并合成了二苯磷酰基取代的四苯基硅基团,并将其作为宽禁带聚合物母体材料构筑基元,通过Suzuki反应偶连3,6位取代的咔唑合成了聚合物SiCzP.对聚合物的结构进行了系统的表征.与模型聚合物SiCz相比,二苯磷酰基的强吸电子能力,降低聚合物母体材料的LUMO能级,更有利于电子的注入.SiCzP与SiCz的玻璃化转变温度分别为219与227℃,失重5%时的分解温度分别为441与426℃.二者均具有良好的成膜性,掺杂器件初步结果表明,二苯磷酰基的引入使器件的亮度和效率都得到提高,其最大流明效率和功率效率比SiCz分别提高了98%和75%.     

Binding modes of cucurbit[6]uril and cucurbit[7]uril with a series of bis-pyridinium compounds

Binding behaviors of cucurbit[6]uril (CB[6]) and cucurbit[7]uril (CB[7]) with a series of bis-pyridinium compounds N, N’-hexamethylenebis(1-alkyl-4-carbamoyl pyridinium bromide) (HBPB-n) (alkyl chain length, n = 6, 8 and 10) guests were investigated using ¹H-NMR, ESI–MS and single crystal X-ray diffraction methods. The results show that CB[6] and CB[7] can form [2]pseudorotaxanes with HBPB-n easily. When increasing the length of tail alkyl chain, the binding site of CB[6] at guest molecules changed from the tail to the middle part, while CB[7] remained located over the tail chain. As CB[6] and CB[7] were added in HBPB-8 aqueous solution, a [3]pseudorotaxane was formed by the inclusion of the internal middle site in CB[6] and the tail chain in CB[7].     

Effects of experimental conditions on the molecular composition of maltenes and asphaltenes derived from oilsands bitumen: Characterized by negative-ion ESI FT-ICR MS

A vacuum topped Canadian oilsands bitumen (VTB) was subjected to solvent precipitation and subsequently characterized by elemental analysis, gel permeation chromatograph (GPC), 1 H-NMR spectroscopy and negative-ion electrospray ionization (ESI) Fourier transform ion cyclotron resonance mass spectrometry (FT-ICR MS). Effects of experimental conditions such as solvent types (n-C5 , n-C6 , and n-C7 ), solvent purity, and solvent washing time on asphaltenes yields, bulk composition, and molecular composition of detectable heteroatom compounds in ESI source were determined. Elemental nitrogen and sulfur were enriched in asphaltenes while elemental oxygen had comparable content in maltenes and asphaltenes. Molecular composition of asphaltenes varies with separation conditions. The N1 and O1 species identified by ESI FT-ICR MS were enriched in maltenes. The O2 species exhibited two different double bond equivalents (DBE) distributions and solubility in normal paraffin solvents, indicating two types of molecular structures. Multi oxygen atom containing compounds mainly detected in asphaltenes. Compound class distributions are similar for maltenes derived from n-C5 , n-C6 , and n-C7 , as well as for asphaltenes. The cyclic paraffin impurities in normal paraffin solvents had a significant influence on asphaltenes yields and heteroatom molecular composition. A portion of neutral N1 species and acidic O2 species adsorbed on asphaltenes could be dissolved by increasing washing time. Cautions should be exercised when interpreting the properties and composition of asphaltenes obtained with different experimental conditions.     

Heterogeneous copper-free Sonogashira coupling reaction catalyzed by a reusable palladium Schiff base complex in water

Heterogeneous Sonogashira coupling of terminal alkynes with aryl halides was studied over a polymer-supported macrocyclic Schiff base palladium complex. The cross-coupling reaction proceeded smoothly by adding a piperidine in water medium. The catalyst exhibited effective catalytic activities to afford the corresponding products in good to excellent yields under copper-free conditions. Furthermore, the catalyst could be easily recovered and reused for several times without a significant loss of its activity.     

Synthesis and characterization of high molecular weight poly(1,2-propylene carbonate-<Emphasis Type="Italic">co</Emphasis>-1,2-cyclohexylene carbonate) using zinc complex catalyst

Using supported multi-component zinc dicarboxylate catalyst,poly（1,2-propylene carbonate-co-1,2-cyclohexylene carbonate）（PPCHC） was successfully synthesized from carbon dioxide（CO₂） with propylene oxide（PO） and cyclohexene oxide（CHO）.The conversion of epoxides dramatically increased up to 89.7%（yield:384.2 g of polymer per g of Zn） with increasing reaction temperature from 60℃to 80℃.The optimized reaction temperature is 80℃.The chemical structure,the molecular weight,as well as thermal and mechanical properties of the resulting terpolymers were investigated extensively. When CHO feed content（mol%） is lower than 10%,the PPCHC terpolymers have number average molecular weight（M_n） ranging from 102×10³ to 202×10³ and molecular weight distribution（MWD） values ranging from 2.8 to 3.5.In contrast to poly（propylene carbonate）（PPC）,the introduction of small amount of CHO leads to increase in the glass transition temperature from 38.0℃to 42.6℃.Similarly,the mechanical strength of the synthesized terpolymer is greatly enhanced due to the incorporation of CHO.These improvements in mechanical and thermal properties are of importance for the practical application of PPC.     

A novel lipase-based stationary phase in liquid chromatography

A streptavidin functionalized capillary immune microreactor was designed for highly efficient flow-through chemiluminescent (CL) immunoassay. The functionalized capillary could be used as both a support for highly efficient immobilization of antibody and a flow cell for flow-through immunoassay. The functionalized inner wall and the capture process were characterized using scanning electron microscopy. Compared to conventional packed tube or thin-layer cell immunoreactor, the proposed microreactor showed remarkable properties such as lower cost, simpler fabrication, better practicality and wider dynamic range for fast CL immunoassay with good reproducibility and stability. Using α-fetoprotein as model analyte, the highly efficient CL flow-through immunoassay system showed a linear range of 3 orders of magnitude from 0.5 to 200 ng mL⁻¹ and a low detection limit of 0.1 ng mL⁻¹. The capillary immune microreactor could make up the shortcoming of conventional CL immunoreactors and provided a promising alternative for highly efficient flow-injection immunoassay.