RP-HPLC Method for the Quantitation of Glabridin in Yashti-madhu (Glycyrrhiza glabra)

A reverse phase high performance liquid chromatographic method is developed for the quantitation of glabridin in Glycyrrhiza glabra, using C₁₈ column with acetonitrile-water containing 2% AcOH (70:30) as an eluent. Glabridin is detected by UV absorption at 280 nm after separation by the chromatographic system. Good linearity was obtained in the working range of the concentration (0.01–0.1 mg mL^?1), with correlation coefficients 0.999. Limit of detection and limit of quantitation were 0.0195 and 0.065 mg mL^?1. The method was validated under ICH guidelines. The described method can be utilized for routine analysis (assays and stability tests) of G. glabra extracts and Ayurvedic medicine based on Yashti-madhu.     

Varying the metal/metal ratio in related Cu–Ca complexes

We demonstrate with the help of structural determinations and spectroscopic data that the nuclearity of Cu–Ca complexes derived from compartmental Schiff base ligands does not depend on the ionic radius of calcium. The main factors governing these reactions are the different affinities of the calcium ions for the anionic species present in solution: the tetradentate O₂O₂ coordination site of the ligand and the nitrato ions. Because these affinities do vary upon going from calcium to lanthanide ions, it is not possible to use the template effect of the trinuclear Cu–Ca–Cu complexes in order to prepare the corresponding Cu–Ln–Cu complexes.     

Synthesis of polyfunctionally substituted heteroaromatic compounds via benzotriazolyl chalcones with antimicrobial and antifungal activities

The utility of both 3‐(1‐benzotriazolyl) chalcone derivatives 3a‐c and 2‐(1‐benzotriazolyl)‐1,4‐pentadien‐3‐one (18) in the synthesis of some new 2‐(1H)‐pyridone, pyridine, pyrazole and isoxazole derivatives is reported. Antimicrobial and antifungal screening of some selected examples from the synthesized products were carried out. The structure of the newly synthesized compounds was elucidated by elemental analysis, ir, ¹H and ¹³C nmr investigations.     

Biological Potentials and Phytochemical Constituents of Raw and Roasted Nigella arvensis and Nigella sativa

Nigella species are widely used to cure various ailments. Their health benefits, particularly from the seed oils, could be attributed to the presence of a variety of bioactive components. Roasting is a critical process that has historically been used to facilitate oil extraction and enhance flavor; it may also alter the chemical composition and biological properties of the Nigella seed. The aim of this study was to investigate the effect of the roasting process on the composition of the bioactive components and the biological activities of Nigella arvensis and Nigella sativa seed extracts. Our preliminary study showed that seeds roasted at 50 °C exhibited potent antimicrobial activities; therefore, this temperature was selected for roasting Nigella seeds. For extraction, raw and roasted seed samples were macerated in methanol. The antimicrobial activities against Streptococcus agalactiae, Streptococcus epidermidis, Streptococcus pyogenes, Candida albicans, Escherichia coli, Enterobacter aerogenes, Klebsiella pneumoniae, and Klebsiella oxytoca were determined by measuring the diameter of the zone of inhibition. The cell viability of extracts was tested in a colon carcinoma cell line, HCT-116, by using a microculture tetrazolium technique (MTT) assay. Amino acids were extracted and quantified using an automatic amino acid analyzer. Then, gas chromatography–mass spectrometry (GC–MS) analysis was performed to identify the chemical constituents and fatty acids. As a result, the extracts of raw and roasted seeds in both Nigella species showed strong inhibition against Klebsiella oxytoca, and the raw seed extract of N. arvensis demonstrated moderate inhibition against S. pyogenes. The findings of the MTT assay indicated that all the extracts significantly decreased cancer cell viability. Moreover, N. sativa species possessed higher contents of the measured amino acids, except tyrosine, cystine, and methionine. The GC–MS analysis of extracts showed the presence of 22 and 13 compounds in raw and roasted N. arvensis, respectively, and 9 and 11 compounds in raw and roasted N. sativa, respectively. However, heat treatment decreased the detectable components to 13 compounds in roasted N. arvensis and increased them in roasted N. sativa. These findings indicate that N. arvensis and N. sativa could be potential sources of anticancer and antimicrobials, where the bioactive compounds play a pivotal role as functional components.     

Synthesis of the [11]Cyclacene Framework by Repetitive Diels–Alder Cycloadditions

The Diels–Alder cycloaddition between bisdienes and bisdienophile incorporating the 7-oxa-bicyclo[2.2.1]heptane unit are well known to show high diastereoselectivity that can be exploited for the synthesis of molecular belts. The related bisdiene 5,6,7,8-tetramethylidene-2-bicyclo[2.2.2]octene is a valuable building block for the synthesis of photoprecursors for acenes, but it has not been employed for the synthesis of molecular belts. The present work investigates by computational means the Diels–Alder reaction between these bisdiene building blocks with syn-1,4,5,8-tetrahydro-1,4:5,8-diepoxyanthracene, which shows that the diastereoselectivity of the Diels–Alder reaction of the etheno-bridged bisdiene is lower than that of the epoxy-bridged bisdiene. The reaction of the etheno-bridged bisdiene and syn-1,4,5,8-tetrahydro-1,4:5,8-diepoxyanthracene in 2:1 ratio yields two diastereomers that differ in the orientation of the oxa and etheno bridges based on NMR and X-ray crystallography. The all-syn diastereomer can be transformed into a molecular belt by inter- and intramolecular Diels–Alder reactions with a bifunctional building block. The molecular belt could function as a synthetic intermediate en route to a [11]cyclacene photoprecursor.     

Core-Modified Coelenterazine Luciferin Analogues: Synthesis and Chemiluminescence Properties

In this work on the design and studies of luciferins related to the blue-hued coelenterazine, the synthesis of heterocyclic analogues susceptible to produce a photon, possibly at a different wavelength, is undertaken. Here, the synthesis of O-acetylated derivatives of imidazo[1,2-b]pyridazin-3(5 H)-one, imidazo[2,1-f][1,2,4]triazin-7(1 H)-one, imidazo[1,2-a]pyridin-3-ol, imidazo[1,2-a]quinoxalin-1(5 H)-one, benzo[f]imidazo[1,2-a]quinoxalin-3(11 H)-one, imidazo[1′,2′:1,6]pyrazino[2,3-c]quinolin-3(11 H)-one, and 5,11-dihydro-3 H-chromeno[4,3-e]imidazo[1,2-a]pyrazin-3-one is described thanks to extensive use of the Buchwald–Hartwig N-arylation reaction. The acidic hydrolysis of these derivatives then gave solutions of the corresponding luciferin analogues, which were studied. Not too unexpectedly, even if these were “dressed” with substituents found in actual substrates of the nanoKAZ/NanoLuc luciferase, no bioluminescence was observed with these compounds. However, in a phosphate buffer, all produced a light signal, by chemiluminescence, with extensive variations in their respective intensity and this could be increased by adding a quaternary ammonium salt in the buffer. This aspect was actually instrumental to determine the emission spectra of many of these luciferin analogues.     

Determination of microquantities of mercury(II) with preliminary thin-layer chromatographic separation from mercury(I), lead(II), nickel(II), and copper(II) on acid-treated silica gel layers: Recovery of mercury(II) from river waters and industrial wastewaters

Thin-layer chromatography in combination with spectrophotometry has been applied for the separation and estimation of Hg(II) using silica gel layers impregnated with 2% oxalic acid as stationary phase with an ethyl acetate:acetone:formic acid:water (8:7:4:1) solvent system. Separation of Hg(II) from Hg(I) and of Th⁴⁺ from UO₂²⁺ is not affected by the presence of common anions in the sample solution. Hg(II) has been successfully separated from Ni(II), Cu(II), and Pb(II) over a wide range of pH (0.5–7.0) of sample solution. An attempt has been made to recover Hg(II) from rivers and industrial wastewaters.     

New routes to the synthesis of pyridazinone,ethoxypyridine, pyrazole and pyrazolo[1,5‐a]pyrimidine derivatives incorporating a benzotriazole moiety

A new approach to the synthesis of pyridazinone, ethoxypyridine, pyrazole and 7‐aminopyrazolo‐[1,5‐a]pyrimidine derivatives. The structure of the newly synthesized compounds was elucidated by elemental analyses, ir, ¹H nmr spectra and in some cases by ¹³C nmr investigations.     

Hydrogen bonding and π–π interactions in the cocrystal salt [Fe(bpe)2(H2O)4](TCEP)2·2(bpe) [bpe is trans‐1,2‐bis(pyridin‐4‐yl)ethene and TCEP is 1,1,3,3‐tetracyano‐2‐ethoxypropenide]

The cocrystal salt tetraaquabis[trans‐1,2‐bis(pyridin‐4‐yl)ethene‐κN]iron(II) bis(1,1,3,3‐tetracyano‐2‐ethoxypropenide)–trans‐1,2‐bis(pyridin‐4‐yl)ethene (1/2), [Fe(C₁₂H₁₀N₂)₂(H₂O)₄](C₉H₅N₄O)₂·2C₁₂H₁₀N₂, is a rare example of a mononuclear Fe^II compound with trans‐1,2‐bis(pyridin‐4‐yl)ethane (bpe) ligands. The complex cation resides on a crystallographically imposed inversion center and exhibits a tetragonally distorted octahedral coordination geometry. Both the symmetry‐independent bpe ligand and the cocrystallized bpe molecule are essentially planar. The 1,1,3,3‐tetracyano‐2‐ethoxypropenide counter‐ion is nonplanar and the bond lengths are consistant with significant electron delocalization. The extended structure exhibits an extensive O—H…N hydrogen‐bonding network with layers of complex cations joined by the cocrystallized bpe. Both the coordinated and the cocrystallized bpe are involved in π–π interactions. Hirshfeld and fingerprint plots reveal the important intermolecular interactions. Density functional theory was used to estimate the strengths of the hydrogen‐bonding and π–π interactions, and suggest that the O—H…N hydrogen bonds enhance the strength of the π‐interactions by increasing the polarization of the pyridine rings.