New approach to development of phenolic thermopolymerization inhibitors for processing of pyrolysis products (by example of pyrocatechol)

New approach to processing of phenols to enable their use as thermopolymerization inhibitors of unsaturated components of pyrocondensates is suggested. The method consists in a mild thermal treatment of a mixture of phenol, solvent, and kraft terpentine. A treatment of this kind results in that any (un)substituted phenol acquires inhibiting properties that compare well with those of the best phenolic inhibitors.     

A novel synthesis of (3,6-bis(2,3-dihydrothieno[3,4-b][1,4]dioxin-5-yl)-9-(4-vinylbenzyl)-9H-carbazole), alternating polymer formation, characterization, and capacitance measurements

In this work, (3,6-bis(2,3-dihydrothieno[3,4-b][1,4]dioxin-5-yl)-9-(4-vinylbenzyl)-9H-carbazole) (EDOTVBCz) comonomer was chemically synthesized and characterized by Fourier transform infrared (FTIR), proton nuclear magnetic resonance, and carbon nuclear magnetic resonance spectroscopy. EDOTVBCz was electrocoated on glassy carbon electrode (GCE) in various initial molar concentrations ([EDOTVBCz]₀?=?1.0, 1.5, 2.0, and 3.0) in 0.1 M lithium perchlorate (LiClO₄)/acetonitrile (CH₃CN). P(EDOTVBCz)/GCE was characterized by cyclic voltammetry, FTIR reflectance-attenuated total reflection spectroscopy, scanning electron microscopy–energy dispersive X-ray analysis, atomic force microscopy, and electrochemical impedance spectroscopy (EIS). EIS was used to determine the capacitive behaviors of modified GCE via Nyquist, Bode magnitude, Bode phase, and admittance plots. The highest low-frequency capacitance value was obtained as C _LF?=?～2.35 mF cm^?2 for [EDOTVBCz]₀?=?3.0 mM. Double-layer capacitance of the polymer/electrolyte system was calculated as C _dl?=?～2.78 mF cm^?2 for [EDOTVBCz]₀?=?1.0 and 3.0 mM. The maximum phase angle was obtained as θ?=?～76.7^o for [EDOTVBCz]₀?=?1.0, 1.5, 2.0, and 3.0 mM at the frequency of 20.6 Hz. AC impedance spectra of P(EDOTVBCz)/LiClO₄/CH₃CN was obtained by performing electrical equivalent circuit model of R(Q(R(CR))) with linear Kramers–Kronig test.

Voltammetric methods of reboxetine analysis and the mechanism of its electrode reactions

Reboxetine (RBX) electrochemical redox behavior at hanging mercury drop (HMDE) and glassy carbon electrodes (GCE) was studied in various pH Britton-Robinson universal buffers using cyclic voltammetry and square-wave voltammetry. RBX was reduced at the HMDE and oxidized at the GCE with reversible adsorption controlled and irreversible diffusion controlled processes respectively. The anodic peak is due to the amine and the cathodic peak may correspond to oxygen protonation. An oxidation reaction mechanism is proposed. The linear relation between peak currents and RBX concentration allowed simple, sensitive, precise and inexpensive voltammetric procedures to be developed. The limit of detection was 0.04 µM RBX. The procedures were successfully applied to human urine and RBX tablet assay. Therapeutic RBX concentrations in human serum were not detected due to strong drug-protein binding. Using bovine serum albumin, the methods were used to investigate the effect of serum protein binding on RBX determination.      

Simultaneous Determination of α- and γ-Mangostins in Mouse Plasma by HPLC–MS/MS Method: Application to a Pharmacokinetic Study of Mangosteen Extract in Mouse

Recently, extracts from the pericarp of mangosteen, Garcinia mangostana L., exhibited various pharmacological properties such as anti-oxidative, anti-inflammatory, anti-bacterial and chemopreventive activities. Albeit it has diverse application, there is little information about its pharmacokinetic aspects. Thus, the present study was undertaken to develop the simultaneous determination of α- and γ-mangostins (α- and γ-MG), major and active compounds, from extracts for the application of pharmacokinetic studies in mice using combined liquid chromatography–tandem mass-spectrometry and microsampling systems. The intra- and inter-validation, precision, accuracy, stability, recovery and matrix effects of α- and γ-MG were conducted in mouse plasma. Based on the developed analytical methods, pharmacokinetic parameters of α- and γ-MG after intravenous and oral administration of mangosteen extract were calculated. In sample preparation steps, the biological samples were deproteinized by acetonitrile and chromatographic separation was accomplished on a C₁₈ column. The detection was accomplished by multiple-reaction monitoring scanning after electrospray ionization source in the positive ionization mode. The optimized mass transition ion pairs (m/z) for quantitation were 411.062 → 354.900, 397.384 → 340.900, and 808.379 → 527.200 for α- and γ-MG and docetaxel (internal standard), respectively. The total run time was 5 min. The results provided a meaningful basis for the preclinical and clinical application of mangosteen extract.     

The Pharmacokinetic Profiles of Pre-Operative Prophylactic Cefepime Application in Pregnant and Non-Pregnant Women Undergoing Surgical Interventions Using a Fully Validated Liquid Chromatographic Method

Pregnancy alters pharmacokinetic profile of many drugs, because of altering body volume and metabolism rate. Therefore, dosage rates and concentrations of drugs must be controlled during pregnancy. Here, we identified the pharmacokinetic profile of pre-operatively given cefepime in caesarean section and gynecological operations using a simple, rapid, cost-effective and valid liquid chromatographic method. The chromatographic separation was performed using 40 mM, pH 3.2 phosphate buffer containing 6 % methanol as mobile phase at 0.30 mL min^?1 flow rate. Gradient elution with methanol was applied to get shorter analysis time without any interference from plasma endogens. During analyses, temperature of column, autosampler and detector were set as 30, 10 and 40 °C, respectively. The detection wavelength was 260 nm and ceftizoxime was used as internal standard. At the optimum conditions, the cefepime analysis from plasma samples was completed in 7 min. Cefepime was extracted from plasma samples using perchloric acid with a very high recovery rate (99.3 %). The method was fully validated according to the Food and Drug Administration guidelines for bioanalytical method validation, and found to be selective, linear, repeatable, reproducible and robust. After validation studies, the method was applied to five caesarean-sectioned and four non-pregnant sectioned women treated with pre-operative, prophylactic single intravenous dose of cefepime (1 g Maxipime^®) in order to determine pharmacokinetic profile of cefepime. Peak serum concentrations of cefepime in caesarean-sectioned women at the arterial port after infusion was 70.11 ± 10.74 μg mL^?1. The mean elimination half-life, volume of distribution and calculated area under the concentration–time curve (AUC)_0–∞ were 1.10 ± 0.23 h, 14.22 ± 2.29 L and 101.55 ± 10.99 μg h mL^?1 for caesarean-sectioned women; and 1.14 ± 0.21 h, 14.76 ± 2.92 L and 104.71 ± 36.34 μg h mL^?1 for non-pregnant sectioned women, respectively. The area under curve, elimination half-life, maximum plasma concentration and the mean distribution volume of cefepime were not changed in case of pregnancy.     

A Photochemical Approach to a Potential Precursor of the Bicyclo [6.4.0] Dodecane Ring System of Taxane Diterpenes

The intermolecular [2+2] photocycloaddition of dimedone 6 and 1-acetoxy-2-methyl-5-dioxolan-1-hexene 7 followed by alkaline treatment, gave the 1,5,5,11-tetramethyl-7-dioxolan bicyclo [4,3,2]-4-decen-2,3-dione 12, and the 1,5,5-trimethyl-3-hydroxy-7-dioxolan bicyclo [5,4,1] dodecan-2,11-dione 13.     

Functional silver nanostructured surfaces applied in SERS and SIMS

Present article deals with functionality of silver nanostructured surfaces prepared by potentiostatic electrochemical deposition on the paraffin impregnated graphite electrode as template‐free substrates. The effect of the electrodeposition conditions on two silver surface functions: analytical signal enhancement in Surface‐enhanced Raman spectroscopy and pre‐ionization function, applied in secondary ion mass spectrometry (SIMS) is reported. Functional silver nanostructured substrate was prepared at a potential ?850 mV with a deposition duration of 20 min. Analytical signal enhancement factors of 3.2 ×10⁵ for Raman peak at 649 cm^?1, 3.0×10⁵ for peak at 810 cm^?1 and 2.7×10⁵ for peak at 1539 cm^?1 were determined for Rhodamine 6G at deposited surface. Slight pre‐ionization effect has been observed in SIMS, and 1.2×10⁵ fold signal enhancement was established for fragment of Rhodamine 6G with m/z 429 (M‐CH₃‐Cl). Electrochemical preparation of nanostructures represents a step towards surface integration directly into miniaturized systems and sensors. Copyright © 2013 John Wiley & Sons, Ltd.     

Volatile organic compounds in an urban environment: a comparison among Belgium,Vietnam and Ethiopia

The effects of urban and indoor air pollution on human health are a major environmental concern for all, but not much has been researched in the developing world. Specifically, quantitative data on the occurrence of volatile organic compounds (VOCs) – main contributors to air pollution – in Asia and Africa are scarce compared to the availability of data in the developed world. This paper presents one of the first studies focusing on the analysis and occurrence of VOCs in Vietnam and Ethiopia, which constitutes part of the novelty of this work. A spectrum of 34 VOCs was measured at eight different urban sites in Ghent (Belgium), Hanoi (Vietnam), Jimma and Addis Ababa (Ethiopia) during three sampling campaigns from September 2008 to September 2010. Sampling was done in an active way by means of sorbent tubes filled with Tenax TA. The analysis was done by TD-GC-MS using internal standard calibration. Data were interpreted and compared in terms of (i) individual, subgroup and total VOCs concentration (TVOCs), (ii) indoor-to-outdoor (I/O) concentration ratios, (iii) source identification by diagnostic ratio and/or correlation coefficients, and (iv) ozone formation potential (OFP) at outdoor sites based on up-to-date maximum incremental reactivity (MIR). I/O concentration ratios varied between 0.2 and 30, with big differences noticed with respect to the type of VOC(s) considered and the type of outdoor sampling location. The highest TVOC concentrations were measured in street samples with maximum values of 54?µg/m³ in Ghent, 507?µg/m³ in Hanoi and 318?µg/m³ in Addis Ababa illustrating the large difference in ambient air quality levels. This is also reflected in the arithmetic mean OFP values (µg/m³) of 82, 1308 and 596 in Ghent, Hanoi and Addis Ababa, respectively. Results of this study could be helpful to support formulation of national policy with regard to ambient air quality.