Branched versus linear oligo(dimethylsiloxane): Differences in their thermodynamic interaction with solvents

The thermodynamic behavior of linear and of branched oligo(dimethylsiloxane) (O‐DMS) solutions was studied by means of vapor pressure measurements and vapor pressure osmometry at different temperatures for the thermodynamically favorable solvent THF. The branched material required for that purpose was synthesized and afterwards fractionated by means of the single solvent acetone to eliminate components of low degrees of branching. The Flory‐Huggins interaction parameters, χ, for the systems THF/O‐DMS as a function of composition pass a minimum at all temperatures (25, 40, and 60 °C) in the case of the branched material. For the unbranched oligomer such a minimum is only observed at 60 °C. At 40 °C the results are ambigous whereas the dependence is definitely linear at 25 °C. This exceptional behavior of the linear product at the latter temperature is tentatively attributed to the formation of favorable orientational order in the pure state under these conditions. At high oligomer concentrations THF interacts more favorably with the branched material, however, this preference is reversed upon dilution. All measured composition dependencies of χ can be modeled quantitatively by an approach accounting for chain connectivity and for the ability of the oligomers to change their conformation upon dilution. © 2010 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 48: 1309–1318, 2010     

Preparation and characterization of activated carbon from <Emphasis Type=Italic>Amygdalus Scoparia</Emphasis> shell by chemical activation and its application for removal of lead from aqueous solutions

Two series of activated carbon have been prepared by chemical activation of Amygdalus Scoparia shell with phosphoric acid or zinc chloride for the removal of Pb(II) ions from aqueous solutions. Several methods were employed to characterize the active carbon produced. The surface area was calculated using the standard Brunauer-Emmet-Teller method. The microstructures of the resultant activated carbon were observed by scanning electron microscopy. The chemical composition of the surface resultant activated carbon was determined by Fourier transform infrared spectroscopy. In the batch tests, the effect of pH, initial concentration, and contact time on the adsorption were studied. The data were fitted with Langmuir and Freundlich equations to describe the equilibrium isotherms. The maximum adsorption capacity of Pb(II) on the resultant activated carbon was 36.63 mg g⁻¹ with H₃PO₄ and 28.74 mg g⁻¹ with ZnCl₂. To regenerate the spent adsorbents, desorption experiments were performed using 0.25 mol L⁻¹ HCl. Here we propose that the activated carbon produced from Amygdalus Scoparia shell is an alternative low-cost adsorbent for Pb(II) adsorption.     

Polyacrylic acid-modified alumina for solid-phase extraction and preconcentration of trace iron and chromium from plant samples

A new method is presented for simultaneous preconcentration of trace Fe(III) and Cr(III) by using polyacrylic acid-alumina as a sorbent. The separation/preconcentration conditions of analytes were investigated, including effect of pH, flow rate, elution conditions, sample volume, and interfering ions. At pH 4, the maximum sorption capacities of Fe3+ and Cr3+ were 8.0 and 13.0 mg/g, respectively, by the column method. The linearity was maintained in the concentration range of 0.175-6.0 x 10(3) ng/mL for iron and 0.175-8.0 x 10(3) ng/mL for chromium in the original solution. The RSD values under optimum conditions were +/- 1.73 and +/- 1.28% for 2.0 microg/mL Fe and Cr, respectively. The preconcentration factor was 400 for both of the elements, and detection limits were 0.025 and 0.023 ng/mL for Fe and Cr in the original solutions. The proposed method was successfully applied to the determination of trace amounts of Fe and Cr in plant samples.     

A novel one‐pot procedure for preparation of some new condensed pyrido[2,3‐d]pyrimidine(1H,3H)‐2,4‐diones

A novel one‐pot procedure for preparation of some new condensed pyrido[2,3‐d]pyrimidine(1H,3H)‐2,4‐diones based on condensation of ninhydrin, alkyl cyanoacetate, and 6‐aminouracil derivatives has been reported. The reactions were carried out in refluxed ethanol and were completed in less than 2 h. © 2007 Wiley Periodicals, Inc. Heteroatom Chem 18:16–18, 2007; Published online in Wiley InterScience ( www.interscience.wiley.com ). DOI 10.1002/hc.20242     

Composite Polymer Nanoparticles via Transitional Phase Inversion Emulsification and Polymerisation

Summary: A new route was employed to produce composite polymer nanoparticles. First, a model polymer (a low molecular-weight polyisobutene) was dissolved in a model monomer (styrene) and then the solution was emulsified in water containing a pair of nonionic surfactants via a transitional phase inversion route. After phase inversion, which produced an oil-in-water miniemulsion, polymerisation of the vinyl monomer gave composite polymer particles. Low temperature emulsification was not practical because the inverted oil-in-water emulsions reinverted to water-in-oil emulsions upon raising the temperature to the reaction temperature. Miniemulsions prepared at the reaction temperature with low monomer content in the oil phase showed good stabilty in the course of polymerisation and produced latexes with a particle size similar to the size of drops in the initial miniemulsions.     

Wells-Dawson Type Heteropolyacid Catalyzed Synthesis of Quinoxaline Derivatives at Room Temperature

Summary. Wells-Dawson heteropolyacid (H₆P₂W₁₈O₆₂ · 24H₂O) was used as an effective catalyst for the synthesis of biologically active quinoxaline derivatives from the condensation of o-phenylenediamines with 1,2-dicarbonyl compounds at room temperature in excellent yields.     

Nicotine functionalized‐silica palladium (II) complex: a highly efficient,environmentally benign and recyclable nanocatalyst for C‐C bond forming reactions under mild conditions

An environmentally friendly silica‐grafted nicotine‐based palladium(II) complex was successfully prepared and evaluated for the first time as novel and efficient nanocatalyst in C‐C bond forming reactions. Grafted‐nicotine in this catalytic system plays an important role, and as an effective ligand and a quaternary ammonium salt demonstrates an efficient stabilizing effect on the Pd(II) species by a synergistic effect of coordination and electrostatic interactions. The catalyst was well characterized by FT‐IR, CHN, XRD, TEM, SEM–EDX, ICP and TG analysis, and demonstrated a highly efficient catalytic activity in the reaction system under phosphine‐free and low Pd loading conditions, and the coupled products were produced in good to excellent yields. Furthermore, the catalyst can be easily recovered and reused without a significant loss of activity. Copyright © 2016 John Wiley & Sons, Ltd.     

Molecularly imprinted stir bar sorptive extraction coupled with high-performance liquid chromatography for trace analysis of naphthalene sulfonates in seawater

In this paper, a novel molecularly imprinted polymer coated stir bar has been used to selectively extract naphthalene sulfonates (NS_s) directly from seawater sample. 1-Naphthalene sulfonic acid (1-NS) was used as template molecule. The effects of different parameters were optimized on the extraction efficiency and the optimum conditions were established as: the absorption and desorption times were fixed, respectively, at 10 and 15 min, stirring speed was 700 rpm, pH was adjusted to 4.1, amount of NaCl was 1 mol L^?1 and extraction process was performed at a temperature of 50 °C. The linear ranges were 2–250 µg L^?1 for 3,6-NDS-1-OH (1-naphthol-3,6-disulfonic acid), 4–250 µg L^?1 for 2-NS (2-naphthalene sulfonate) and 3–250 µg L^?1 for 1-NS. The detection limits were within the range of 0.32–0.95 µg L^?1. Under optimum conditions, the detection limits of the NSs were 0.84, 0.95 and 0.32 µg L^?1 with the enrichment factor of 117-, 41- and 77-fold for 2-NS, 1-NS, and 6-NDS-1-OH, respectively. The repeatability of the method was satisfactory (0.53 ≤ RSD ≤6.0 %, n = 10). The method has been successfully applied for the analysis of trace amounts of three naphthalene sulfonates in seawater of Chabahar Bay.     

One-pot synthesis of coumarine derivatives using butylenebispyridinium hydrogen sulfate as novel ionic liquid catalyst

Pechmann condensation reaction of 3-hydroxyphenol and ethyl acetoacetate in the presence of 1,1′‐butylenebispyridinium hydrogen sulfate as an efficient, green, and recyclable catalyst produces 7-hydroxy-4-methylcoumarin in good yield under solvent-free conditions at room temperature. This catalyst has advantages such as the following: good to excellent yields, short reaction times, simplicity in operation, and easy workup procedure.