The extent of molecular orientation at liquid/vapor interface of pyridine and its alkyl derivatives by molecular dynamics simulation

In this paper, molecular dynamics simulation was performed to investigate the liquid∕vapor interfacial structure of neat polar liquids. Large-scale ensembles of liquid pyridine and its alkyl derivatives, 4-methylpyridine and 4-ethylpyridine, were simulated by classical molecular dynamics at 298 K. For the liquid system of low polarity, the surface density profile of the atoms meet exactly at the middle of interfacial region, and atoms of hydrophobic nature can be hardly discriminated from hydrophilic ones in either vapor or liquid sides. For a liquid system of high polarity, the density profile of atoms with different nature is highly discriminated all over the interfacial region, and as the polarity increases, a dense region of atomic density is clearly developed in the subsurface region. The recognized bivariate method was also used to study the molecular orientational distribution quantitatively. Orientational analysis of the three liquid systems indicates that the pyridine ring plane in the outmost surface tends to be vertical. Its tendency in the innermost interfacial region is parallel. The orientational states available to 4-ethylpyridine and pyridine are discriminated by predicting the possibility of a bisector-wise tumbling for the ring plane in pyridine and a side-wise tumbling in 4-ethylpyridine. The orientational distribution maps explain the trend of experimental surface tension and surface entropy. As the dipole moment of these liquids increases with the alkyl chain length, the surface structural profile changes from a regular definite one to a surface of complex atomic structure involving a dense phase near the interface. The development of dense region in alkyl derivatives is the result of segregation of molecules due to the alkyl group, which is captured and discriminated by molecular dynamics simulation even when the length of a short alkyl chain is increased by one carbon atom.     

Multicomponent reactions for the synthesis of new cyclopentadienephosphonate derivatives in water

A series of polysubstituted cyclopentadienephosphonate derivatives were synthesized via one-pot multicomponent reactions of primary amines and phosphites with activated acetylenic compounds in water as the solvent at room temperature.

Particularly valuable features of this method include high yields of products, broad substrate scope, short reaction time and a straightforward procedure.     

One-pot Synthesis of 1,8-Dioxo-decahydroacridine Derivatives in Aqueous Media

A new and efficient method for the synthesis of 1,8‐dioxo‐9‐aryl‐decahydroacridine derivatives was developed via a one‐pot three component reaction of dimedone, aromatic aldehydes and ammonium acetate in the presence of ammonium chloride, or Zn(OAc)₂·2H₂O or L‐proline separately in water in the short period of time and high yields.     

A simple,rapid and effective protocol for synthesis of bis(pyrazolyl)methanes using nickel–guanidine complex immobilized on MCM-41

Research on Chemical Intermediates - In this paper, a rapid, easy and very efficient method for the synthesis of bis(pyrazolyl)methanes has been reported in the presence of nickel–guanidine...     

An enaminone-directed benzannulation/macrocyclization approach to cyclophane ring systems

A straightforward and modular preparative approach to 1,3,5-triaroylbenzene-based functionalized cyclophane ring systems has been developed. The key cyclophane-forming macrocyclization reaction was accomplished during the course of a regioselective cross-benzannulation between bis(aryl ethynyl) ketone and enaminone reactants. Macrocyclic products with ring sizes ranging from 18- to 22-membered were successfully constructed. The composition of the tether connecting the two aryl ethynyl ketone fragments can be easily varied; consequently, this method is suitable for construction of a diverse range of structurally distinct cyclophane products. To illustrate this feature, cyclophanes possessing xylyl, alkyl, di(ethylene triamine), and di(ethylene oxy) bridging units were synthesized in isolated yields of 11-46%. Three new cyclophanes (calixarene-like macrocyles 8 and 9, as well as crownophane 18) were structurally characterized by X-ray diffractometry.     

Solid phase extraction of Cd(II) and Pb(II) using a magnetic metal-organic framework, and their determination by FAAS

We describe a novel magnetic metal-organic framework (MOF) for the preconcentration of Cd(II) and Pb(II) ions. The MOF was prepared from the Fe₃O₄-pyridine conjugate and the copper(II) complex of trimesic acid. The MOF was characterized by IR spectroscopy, elemental analysis, SEM and XRD. A Box-Behnken design through response surface methodology and experimental design was used to identify the optimal parameters for preconcentration. Extraction time, amount of magnetic MOF and pH value were found to be critical factors for uptake, while type, volume, concentration of eluent, and elution time are critical in the elution step. The ions were then determined by FAAS. The limits of detection are 0.2 and 1.1 μg?L^?1 for Cd(II), and Pb(II) ions, respectively, relative standard deviations are <4.5% (for five replicates at 50 μg?L^?1 of Cd(II) and Pb(II) ions), and the enrichment capacity of the MOF is at around 190 mg?g^?1 for both ions which is higher than the conventional Fe3O4-pyridine material. The magnetic MOF was successfully applied to the rapid extraction of trace quantities of Cd(II) and Pb(II) ions in fish, sediment, and water samples.

Low Temperature Preparation of 3D Solid and Hollow ZnS Nanosphere Self-Assembled from Nanoparticles by Varying Sulfur Source

In this work, we report a facile hydrothermal method for the preparation of three dimensional hollow ZnS nanostructures, using Zinc bis(salicyle aldehitato), Zn(Sal)₂, thioacetamide (TAA) and thioglycolic acid (TGA) as Zn²⁺, sulfur source and capping agent, respectively. The ZnS solid and hollow sphere was produced from the self-assembly of nanoparticles with diameters of 11 ± 2 nm with TGA and TGA, TAA, respectively. Furthermore, with changing zinc precursor from Zn(Sal)₂ to zinc acetate [Zn(OAC)₂], ZnS nanorods were obtained. The products were characterized by XRD, SEM, TEM, selected area electron diffraction, and FT-IR spectra. The influence of surfactant (Polyethylene glycol) on the morphology of the products was also investigated. Possible formation mechanism and optical properties of these architectures were also reported.     

Spectral Investigations of Preferential Solvation and Solute–Solvent Interactions of Free Base and Protonated 5,10,15,20-Tetrakis(4-trimethyl-ammonio-phenyl)-porphine Tetratosylate in Aqueous Organic Mixed Solvents

The solvatochromic properties of the free base and the protonated 5,10,15,20-tetrakis(4-trimethyl-ammonio-phenyl)-porphine tetratosylate (TTMAPP) were studied in pure water, methanol, ethanol, 2-propanol, and their corresponding aqueous mixtures. The correlation of the empirical solvent polarity scale (E _T) values of TTMAPP with composition of the solvents were analyzed by the solvent exchange model of Bosch and Roses to clarify the preferential solvation of the probe dyes in the binary mixed solvents. The solvation shell composition effects in preferential solvation of the solute dyes were investigated in terms of both solvent–solvent and solute–solvent interactions and also the local mole fraction of each solvent composition was calculated in the cybotactic region of the probe. The effective mole fraction variation may provide significant physicochemical insights in the microscopic and molecular level of interactions between TTMAPP species and the solvent components and, therefore, can be used to interpret the solvent effect on kinetics and thermodynamics of TTMAPP.     

Preparation of an experimental glass-ionomer cements and evaluation of their properties

The preparation of glass-ionomer cements based on the composition of SiO₂–Al₂O₃–CaO–SrO–F and evaluation of their properties is described. Cements were prepared via the sol–gel method and characterized by XRD, BET, SEM, and EDAX analysis. The effect of various concentrations of Sr on in vitro bioactivity of the glass speciments was investigated. In vitro bioactivity of the samples was evaluated by soaking them in simulated body fluid followed by structural characterization using SEM and atomic absorption analysis. A glass specimen with 0.5 mol of Sr exhibited appropriate bioactivity.     

Metal-based anticancer agents: targeting androgen-dependent and androgen-independent prostate and COX-positive pancreatic cancer cells by phenanthrenequinone semicarbazone and its metal complexes

A planar, polycyclic and aromatic hydrocarbon ligand, namely 9,10-phenanthrenequinone semicarbazone, and its transition metal complexes have been synthesized and structurally characterized. The in vitro antiproliferative activity of these compounds against five human cancer cell lines revealed that they were effective against androgen receptor-positive/negative prostate cancer cells as well as COX-positive pancreatic BxPC-3 cancer cell line. The driving force behind such antiproliferative activity seems to be the up-regulated COX expression in these cells, which was amenable for targeting through metal complexation. These structural motifs can, therefore, serve as a starting point for developing novel cytotoxic agents against the growing number of prostate and pancreatic cancers.