Ionic Liquid Based Ultrasound-Assisted Emulsification Microextraction for Preconcentration of Phenol Using Central Composite Design

In this work, phenol reacted with 4-aminoantipyrine (4-AAP) reagent in presence of potassium hexacyanoferrate(III) and then was extracted using ultrasound-assisted emulsification microextraction via 1-hexyl-3-methyl imidazolium hexafluorophosphate as an environmentally friendly solvent. Effects of the main experimental variables were investigated and optimized by central composite design. Under the optimum conditions (pH 9.5, 100 mg/L 4-AAP, 100 μL of ionic liquid as extraction solvent, 0.2 g/L K₃Fe(CN)₆ and 0.2 M NH₄Cl) the dynamic linear range, limit of detection and relative standard deviation were obtained as 0.2?25 μg/L, 0.07 μg/L and 2.6%, respectively. Finally, the applicability of the proposed ultrasoundassisted emulsification microextraction was examined and very good results were obtained. The results confirmed the applicability of the proposed method as a versatile, low cost and sensitive preconcentration method for determination of very low concentrations of phenol in aqueous solutions.     

Application of ion-imprinted polymer synthesized by precipitation polymerization as an efficient and selective sorbent for separation and pre-concentration of chromium ions from some real samples

In this study, a new Cr(III)-imprinted polymer (Cr(III)-IIP) is prepared from CrCl₃·6H₂O, methacrylic acid functional monomer, ethyleneglycoldimethacrylate cross-linking agent, 2,2?-azobisisobutyronitrile radical initiator and 2,2-(azanediylbis (ethane-2,1-diyl))bis(isoindoline-1,3-dione) ligand. To obtain the maximum adsorption capacity, the optimum condition was studied through pH, type and concentration of eluent, IIP weight, sample volume as well as the adsorption and desorption times. The Cr(III) ion content was determined via flame atomic absorption spectrometer. In optimum conditions, the adsorption capacity of the IIP for Cr(III) was obtained to be 74.65 mg g^?1, using 50 mg of IIP and the initial pH solution of 3.0. Both the adsorption and desorption times for quantitative analyses of Cr(III) ions were 15 and 5 min; respectively. After elution of the adsorbed ions by 3 mL of 4 mol L^?1 HNO₃ aqueous solution, the established IIP-based SPE procedure provides a reasonable pre-concentration factor of 100. The IIP-based pre-concentration method provides a low detection limit of 1.7 µg L^?1 with good repeatability (RSD?=?3.22%). Reusability studies confirmed that synthesis IIP is reusable and recoverable up to six cycles. According to the selectivity experiments, it was concluded that the prepared sorbent possesses more affinity toward Cr(III) ions than other ions such as Al³⁺, Pb²⁺, Cu²⁺, Mn²⁺, Fe²⁺, Zn²⁺, and Ni²⁺ ions. To evaluate the potential applicability of the proposed separation method, the pre-concentration and determination of trace amounts of Cr(III) were performed successfully in food samples with complex matrices, a bestial sample (i.e. cow liver) and an herbal product (i.e., broccoli) as real samples.     

Ultrafine agarose-coated superparamagnetic iron oxide nanoparticles (AC-SPIONs): a promising sorbent for drug delivery applications

A method for one-step synthesis of ultrafine agarose-coated superparamagnetic iron oxide nanoparticles (AC-SPIONs) was developed. The method is facile and fast and requires no organic solvent or surfactant. The average particle size of the prepared AC-SPIONs was only 20–40 nm with a narrow size distribution and with large saturation magnetization at room temperature. The obtained ultrafine nanogel particles were characterized by scanning electron microscopy, energy-dispersive X-ray analysis, Fourier transform infrared spectroscopy, transmission electron microscopy and vibrating sample magnetometer techniques. The AC-SPIONs were epoxy-activated by epichlorohydrin and aminated by ammonium hydroxide. The amination of the particles was investigated by the Kaiser test. The adsorption of two model compounds (gallic acid and ellagic acid) on the functionalized nanoparticles and their releases from them were investigated spectrophotometrically in three different pH values under biological conditions. The functionalized AC-SPIONs displayed good adsorption and in vitro drug release in a phosphate-buffered saline (pH 7.4). The ultrafine AC-SPIONs can be potentially used in magnetic solid-phase extraction, drug delivery, protein purification and enzyme immobilization methods.     

Production and evaluation of a 67Ga-labeled anti-Ror1 monoclonal antibody in a mouse model of breast cancer

Journal of Radioanalytical and Nuclear Chemistry - Receptor tyrosine kinase Ror1 is widely expressed during embryogenesis but it is absent within most mature tissues. However, expression of Ror1...     

Nano-Fe3O4@SiO2–TiCl3 as a novel nano-magnetic catalyst for the synthesis of 4H-pyrimido[2,1-b]benzothiazoles

Research on Chemical Intermediates - Fe3O4@SiO2–TiCl3 NPs, a novel core shell catalyst, was synthesized via preparing Fe3O4@SiO2 as a magnetic support followed by treatment with titanium...     

Electrochemical determination of naproxen in the presence of acetaminophen using a carbon paste electrode modified with activated carbon nanoparticles

In this study, cyclic voltammetry and differential pulse voltammetry were used to determine the electrochemical properties and concentration of naproxen in pharmaceutical formulation and human serum samples by using a carbon paste electrode modified with activated carbon nanoparticles. Optimum conditions were obtained at an electrode with 0.005 g activated carbon nanoparticles in a phosphate buffer solution of pH 6 as a supporting electrolyte. Linear calibration curves were obtained in the range of 0.1–120 μM, and the detection limit of naproxen determined was 0.0234 μM. The modified electrode shows good selectivity for naproxen in the presence of some organic and inorganic interferences and very good precision in real samples. Finally, naproxen was measured in the presence of acetaminophen.     

Magnetic and Heat Resistant Poly(imide-ether) Nanocomposites Derived from Methyl Rich 9<Emphasis Type="Italic">H</Emphasis>-xanthene: Synthesis and Characterization

In this study a new series of magnetic and heat resistant nanocomposites were prepared based on a highly soluble poly(imide-ether) (PIE) reinforced with two different types of magnetic nanoparticles via a solution intercalation technique. New PIE with good solubility and desired molar mass containing bulky xanthene rings and amide groups in the side chains was synthesized via thermal cyclization of the poly(amic acid) precursor, obtained from the reaction of a new diamine derived from 9H-xanthene and 4,4′-oxydiphthalic dianhydride (ODPA). Improved solubility was attributed to the presence of xanthene group and flexible ether linkage in the polyimide backbones that reduce the chain-chain interaction and enhance solubility by penetrating solvent molecules into the polyimide chains. Fe₃O₄ nanoparticles (MNPs) which synthesized from chemical co-precipitation route were coated with silica (SiO₂), sequentially with (3-aminopropyl)triethoxysilane and poly-melamine-terephthaldehyde (MNPs-PMT), and then separately dispersed in the poly(amic acid) solutions and thermally imidized to form PIE/Fe₃O₄ and PIE/MNPs-PMT nanocomposites. The nanostructures and properties of the resultant materials were investigated using FTIR spectroscopy, X-ray diffraction (XRD), field emission scanning electron microscopy (FE-SEM), transmission electron microscopy (TEM), vibrating sample magnetometer (VSM), thermal gravimetric analysis (TGA) and differential scanning calorimetry (DSC). The properties of the nanocomposites were strongly related to the dispersion and interaction between the nanoparticles and PIE matrix. The thermogravimetric analysis (TGA) results showed that the addition of MNPs-PMT nanoparticles resulted in a substantial increase in the thermal stability of the corresponding PIEN. The temperature at 10% weight loss (T₁₀) was increased from 416 °C to 428 °C for PIEN containing 3 wt% MNPs-PMT as compared to neat PIE, as well the char yield enhanced. Furthermore, the MNPs-PMT nanoparticles had better dispersion in the polymer matrix due to the strong intermolecular hydrogen bond interactions between the NH and C=N groups of surface-modified nanoparticles and the PIE matrix than the uncoated Fe₃O₄ nanoparticles, and exhibited a better intercalated morphology and improved thermal properties. Also, the PIEN nanocomposites under applied magnetic field exhibited the hysteretic loops of the superparamagnetic nature.     

A one-pot three-component approach to synthesis of novel dihydroxyoxoindeno[1,2-b]pyrrole derivatives

A new class of 2-arylamino-dihydroxyindenopyrroles were prepared by the one-pot multicomponent reaction of ninhydrin, N-methyl-1-(methylthio)-2-nitroethenamine and aromatic amines in EtOH at room temperature. The advantages of this procedure are short reaction times, good to high yields, easy separation of products and good functional group tolerance.     

The extent of molecular orientation at liquid/vapor interface of pyridine and its alkyl derivatives by molecular dynamics simulation

In this paper, molecular dynamics simulation was performed to investigate the liquid∕vapor interfacial structure of neat polar liquids. Large-scale ensembles of liquid pyridine and its alkyl derivatives, 4-methylpyridine and 4-ethylpyridine, were simulated by classical molecular dynamics at 298 K. For the liquid system of low polarity, the surface density profile of the atoms meet exactly at the middle of interfacial region, and atoms of hydrophobic nature can be hardly discriminated from hydrophilic ones in either vapor or liquid sides. For a liquid system of high polarity, the density profile of atoms with different nature is highly discriminated all over the interfacial region, and as the polarity increases, a dense region of atomic density is clearly developed in the subsurface region. The recognized bivariate method was also used to study the molecular orientational distribution quantitatively. Orientational analysis of the three liquid systems indicates that the pyridine ring plane in the outmost surface tends to be vertical. Its tendency in the innermost interfacial region is parallel. The orientational states available to 4-ethylpyridine and pyridine are discriminated by predicting the possibility of a bisector-wise tumbling for the ring plane in pyridine and a side-wise tumbling in 4-ethylpyridine. The orientational distribution maps explain the trend of experimental surface tension and surface entropy. As the dipole moment of these liquids increases with the alkyl chain length, the surface structural profile changes from a regular definite one to a surface of complex atomic structure involving a dense phase near the interface. The development of dense region in alkyl derivatives is the result of segregation of molecules due to the alkyl group, which is captured and discriminated by molecular dynamics simulation even when the length of a short alkyl chain is increased by one carbon atom.     

Multicomponent reactions for the synthesis of new cyclopentadienephosphonate derivatives in water

A series of polysubstituted cyclopentadienephosphonate derivatives were synthesized via one-pot multicomponent reactions of primary amines and phosphites with activated acetylenic compounds in water as the solvent at room temperature.

Particularly valuable features of this method include high yields of products, broad substrate scope, short reaction time and a straightforward procedure.