Interactions between a dsDNA Oligonucleotide and Imidazolium Chloride Ionic Liquids: Effect of Alkyl Chain Length,Part I

Ionic liquids (ILs) have become nearly ubiquitous solvents and their interactions with biomolecules has been a focus of study. Here, we used the fluorescence emission of DAPI, a groove binding fluorophore, coupled with molecular dynamics (MD) simulations to report on interactions between imidazolium chloride ([Im_n,1]⁺) ionic liquids and a synthetic DNA oligonucleotide composed entirely of T/A bases (7(TA)) to elucidate the effects ILs on a model DNA duplex. Spectral shifts on the order of 500–1000 cm⁻¹, spectral broadening (~1000 cm⁻¹), and excitation and emission intensity ratio changes combine to give evidence of an increased DAPI environment heterogeneity on added IL. Fluorescence lifetimes for DAPI/IL solutions yielded two time constants 0.15 ns (~80% to 60% contribution) and 2.36–2.71 ns for IL up to 250 mM. With DNA, three time constants were required that varied with added IL (0.33–0.15 ns (1–58% contribution), ~1.7–1.0 ns (~5% contribution), and 3.8–3.6 ns (94–39% contribution)). MD radial distribution functions revealed that π-π stacking interactions between the imidazolium ring were dominant at lower IL concentration and that electrostatic and hydrophobic interactions become more prominent as IL concentration increased. Alkyl chain alignment with DNA and IL-IL interactions also varied with IL. Collectively, our data showed that, at low IL concentration, IL was primarily bound to the DNA minor groove and with increased IL concentration the phosphate regions and major groove binding sites were also important contributors to the complete set of IL-DNA duplex interactions.     

Optimization of isothermal batchwise bulk free radical polymerization with and without chain transfer agent for minimum reaction time

In this work the minimum reaction time was studied for a specific final monomer conversion and number-average chain length by adjusting the amount of initial initiator concentration in the presence of a fixed amount of chain transfer agent at the best isothermal temperature. A new method for the determination of the best initial initiator concentration ([I]₀) and isothermal temperature (T) in the presence of chain transfer agent was developed by the application of a simple optimization algorithm, based on the Lagrangian multiplier, to the basic free radical kinetics. Numerical examples for the polymerization of styrene are presented. It is shown that in the presence of a fixed amount of chain transfer agent the best isothermal policy for minimum time would deviate from dead-end polymerization. As the concentration of chain transfer agent increases, a stronger deviation from dead-end polymerization is observed. It was found that for a given pair of desired conversion and number-average chain length the usage of a chain transfer agent would result in a longer reaction time. The results give insights into operation of batchwise bulk free radical polymerization for minimum reaction time under isothermal conditions.     

Uncommon Terpenoids from Salvia Species: Chemistry,Biosynthesis and Biological Activities

The search for new bioactive compounds from plant sources has been and continues to be one of the most important fields of research in drug discovery. However, Natural Products research has continuously evolved, and more and more has gained a multidisciplinary character. Despite new developments of methodologies and concepts, one intriguing aspect still persists, i.e., different species belonging to the same genus can produce different secondary metabolites, whereas taxonomically different genera can produce the same compounds. The genus Salvia L. (Family Lamiaceae) comprises myriad distinct medicinal herbs used in traditional medicine worldwide that show different pharmacological activities due to the presence of a variety of interesting specialized metabolites, including mono-, sesqui-, di-, sester-, tri-, tetra-, and higher terpenoids as well as phenylpropanoids, phenolic acid derivatives, lignans, flavonoids, and alkaloids. We herein summarize the research progress on some uncommon terpenoids, isolated from members of the genus Salvia, which are well recognized for their potential pharmacological activities. This review also provides a current knowledge on the biosynthesis and occurrence of some interesting phytochemicals from Salvia species, viz. C₂₃-terpenoids, sesterterpenoids (C₂₅), dammarane triterpenoids (C₃₀), and uncommon triterpenoids (C₂₀+C₁₀). The study was carried out by searching various scientific databases, including Elsevier, ACS publications, Taylor and Francis, Wiley Online Library, MDPI, Springer, Thieme, and ProQuest. Therefore, 106 uncommon terpenoids were identified and summarized. Some of these compounds possessed a variety of pharmacological properties, such as antibacterial, antiviral, antiparasitic, cytotoxic and tubulin tyrosine ligase inhibitory activities. Due to the lack of pharmacological information for the presented compounds gathered from previous studies, biological investigation of these compounds should be reinvestigated.     

Dynamical behavior and network analysis of an extended Hindmarsh–Rose neuron model

Nonlinear Dynamics - In this paper, the extended Hindmarsh–Rose neuron model, which considers the slow intracellular exchange of calcium ions between its store and the cytoplasm, is studied....     

Interaction of longitudinal phonons with discrete breather in strained graphene

We numerically analyze the interaction of small-amplitude phonon waves with standing gap discrete breather (DB) in strained graphene. To make the system support gap DB, strain is applied to create a gap in the phonon spectrum. We only focus on the in-plane phonons and DB, so the issue is investigated under a quasi-one-dimensional setup. It is found that, for the longitudinal sound waves having frequencies below 6 THz, DB is transparent and thus no radiation of energy from DB takes place; whereas for those sound waves with higher frequencies within the acoustic (optical) phonon band, phonon is mainly transmitted (reflected) by DB, and concomitantly, DB radiates its energy when interacting with phonons. The latter case is supported by the fact that, the sum of the transmitted and reflected phonon energy densities is noticeably higher than that of the incident wave. Our results here may provide insight into energy transport in graphene when the spatially localized nonlinear vibration modes are presented.     

Production and evaluation of a 67Ga-labeled anti-Ror1 monoclonal antibody in a mouse model of breast cancer

Journal of Radioanalytical and Nuclear Chemistry - Receptor tyrosine kinase Ror1 is widely expressed during embryogenesis but it is absent within most mature tissues. However, expression of Ror1...     

Application of ion-imprinted polymer synthesized by precipitation polymerization as an efficient and selective sorbent for separation and pre-concentration of chromium ions from some real samples

In this study, a new Cr(III)-imprinted polymer (Cr(III)-IIP) is prepared from CrCl₃·6H₂O, methacrylic acid functional monomer, ethyleneglycoldimethacrylate cross-linking agent, 2,2?-azobisisobutyronitrile radical initiator and 2,2-(azanediylbis (ethane-2,1-diyl))bis(isoindoline-1,3-dione) ligand. To obtain the maximum adsorption capacity, the optimum condition was studied through pH, type and concentration of eluent, IIP weight, sample volume as well as the adsorption and desorption times. The Cr(III) ion content was determined via flame atomic absorption spectrometer. In optimum conditions, the adsorption capacity of the IIP for Cr(III) was obtained to be 74.65 mg g^?1, using 50 mg of IIP and the initial pH solution of 3.0. Both the adsorption and desorption times for quantitative analyses of Cr(III) ions were 15 and 5 min; respectively. After elution of the adsorbed ions by 3 mL of 4 mol L^?1 HNO₃ aqueous solution, the established IIP-based SPE procedure provides a reasonable pre-concentration factor of 100. The IIP-based pre-concentration method provides a low detection limit of 1.7 µg L^?1 with good repeatability (RSD?=?3.22%). Reusability studies confirmed that synthesis IIP is reusable and recoverable up to six cycles. According to the selectivity experiments, it was concluded that the prepared sorbent possesses more affinity toward Cr(III) ions than other ions such as Al³⁺, Pb²⁺, Cu²⁺, Mn²⁺, Fe²⁺, Zn²⁺, and Ni²⁺ ions. To evaluate the potential applicability of the proposed separation method, the pre-concentration and determination of trace amounts of Cr(III) were performed successfully in food samples with complex matrices, a bestial sample (i.e. cow liver) and an herbal product (i.e., broccoli) as real samples.     

Ultrasound and Sonochemistry for Radical Polymerization: Sound Synthesis

The use of ultrasound as an external stimulus for promoting polymerization reactions has received increasing attention in recent years. In this Review article, the fundamental processes that can lead to either the homolytic cleavage of polymer chains, or the sonolysis of solvent (or other) small molecules, under the application of ultrasound are described. These reactions promote the production of reactive radicals, which can be utilized in chain-growth radical polymerizations under the right conditions. A full historical overview of the development of ultrasound-assisted radical polymerization is provided, with special attention given to the recently described systems that are “controlled” by methods of reversible (radical) deactivation. Perspectives are shared on what challenges still remain in polymer sonochemistry, as well as new areas that are yet to be explored.     

NE102A Plastic Scintillator Response to 3He Ions

Physics of Particles and Nuclei Letters - Plastic scintillators are widely used in detecting nuclear radiation due to their low construction cost, the ability to be produced in nearly any shape and...     

Preparation and characterization of nano-Co-[4-chlorophenyl-salicylaldimine-methyl pyranopyrazole]Cl2 as a new Schiff base complex and catalyst for the solvent-free synthesis of 1-amidoalkyl-2-naphthols

By the reaction of 4-chlorobenzaldehyde with ethyl acetoacetate, malononitrile, and hydrazine hydrate, 6-amino-4-(4-chlorophenyl)-3-methyl-2,4-dihydropyrano[2,3-c]pyrazole-5-carbonitrile was prepared and then reacted with salicylaldehyde and CoCl₂·6H₂O to produce nano-Co-[4-cholorophenyl-salicylaldimine-methylpyranopyrazole]Cl₂ (nano-[Co-4CSMP]Cl₂). The prepared nano-Schiff base complex was reported for the first time and fully characterized by Fourier transform-infrared spectroscopy, thermal gravimetric analysis, differential thermal gravimetric analysis, scanning electron microscopy, energy-dispersive X-ray spectroscopy, transmission electron microscopy, and Brunner–Emmett–Teller analyses and applied as an efficient catalyst for the synthesis of some 1-amidoalkyl-2-naphthol derivatives.