A 3D mesh deformation technique for irregular in‐flight ice accretion

Aircraft holding around busy airports may be requested to sustain as much as 45 min of icing before landing or being diverted to another airport. In this paper, a three‐dimensional mesh deformation scheme, based on a structural frame analogy, is proposed for the numerical simulation of ice accretion during extended exposure to adverse weather conditions. The goal is to provide an approach that is robust and efficient enough to delay or altogether avoid re‐meshing while preserving (enforcing) nearly orthogonal elements at the highly distorted ice surface. Robustness is achieved by suitably modifying the axial and torsional stiffness components of the frame elements in order to handle large and irregular grid displacements typical of in‐flight icing. Computational efficiency is obtained by applying the mesh displacement to an automatically selected small subset of the entire computational domain. The methodology is validated first in the case of deformations typical of fluid‐structure interaction problems, including wing bending, a helicopter rotor in forward flight, and the twisting of a high‐lift wing configuration. The approach is then assessed for aero‐icing on two swept wings and compared against experimental measurements where available. Copyright © 2015 John Wiley & Sons, Ltd.     

A convenient synthesis of bis(indolyl)alkanes under ultra sonic irradiation using silica-supported Preyssler nano particles

Bis(indolyl)alkanes have been synthesised in excellent yields in the presence of catalytic amount of silica-supported Preyssler nano particles as green, reusable and efficient catalyst under ultra sonic irradiation.     

The selective aerobic oxidation of methylaromatics to benzaldehydes using a unique combination of two heterogeneous catalysts

A unique combination of a supported cobalt complex and the first example of supported NHPI in acetic acid gives a surprisingly stable heterogeneous catalytic system for the selective aerobic oxidation of methylaromatics to benzaldehydes at atmospheric pressure.     

Sensitive Kinetic-Spectrophotometric Determination of Trace Amounts of Periodate Ion

A simple, precise, sensitive and accurate method was developed for rapid determination of trace quantities of periodate. The method is based on the accelerating effect of periodate on the reaction of bromate and hydrochloric acid in the presence of hydrazine. The decolorization of methyl orange with the reaction products was used to monitor the reaction spectrophotometrically at 525 nm. Periodate could be determined in the concentration ranges of 0.02–1.5 g/mL. The relative standard deviation for ten replicate determinations of 0.3 g/mL of periodate was 1.12%. The method was applied to the determination of periodate in water samples and indirect determination of ethylene glycol in gasoline and glycerol in vegetable oil via Malaprade reaction with satisfactory results.     

Sonochemical synthesis of silver vanadium oxide micro/nanorods: Solvent and surfactant effects

In this investigation, a facile sonochemical route has been developed for the preparation of silver vanadium oxide (SVO) micro/nanorods by using silver salicylate and ammonium metavanadate as silver and vanadate precursor, respectively. Here, silver salicylate, [Ag(HSal)], is introduced as a new silver precursor to fabricate AgVO₃ nanorods. The effect of numerous solvents and surfactants on the morphology and sonochemical formation mechanism of AgVO₃ nanorods was studied. AgVO₃ nanorods were characterized by SEM and TEM images, XRD patterns, FT-IR, XPS, and EDS spectroscopy. SEM, TEM, and XRD results showed that AgO nanoparticles were formed onto AgVO₃ nanorods in the presence of ethanol, cyclohexanol, dimethylsulfoxide (DMSO), and acetone. By using polyethylene glycol (PEG-6000) and N,N-dimethylformamide (DMF) as organic additives, the thickness of AgVO₃ nanorods decreased.     

N‐phosphinyl ureas: Synthesis,characterization, X‐ray structure,and in vitro evaluation of antitumor activity

A new series of N‐phosphinylureas 5b, 6a–7c was synthesized and characterized by ¹H, ¹³C, ³¹P NMR, IR, and elemental analysis. The three‐dimensional structure of 5b has been determined by X‐ray crystallography. The crystal structure revealed the existence of four independent molecules. All structures form two chains with different arrangements and connect to each other via hydrogen bonds to produce two‐dimensional polymeric chains. The cytotoxicity of cyclophosphamide (a standard antitumor compound) and its nine analogues with formula R¹C₆H₄ NHC(O)NHP(O)XCH₂C(R²)₂ CH₂Y(X = Y = NH, R² = CH₃, R¹ = H ( 5a ), CH₃ ( 5b ), NO₂ ( 5c ), X = O, Y = NH, R² = H, R¹ = H ( 6a , CH₃ ( 6b ), NO₂ ( 6c ), and X = Y = O, R² = CH₃, R¹ = H ( 7a ), CH₃ ( 7b ), NO₂ ( 7c )) as well as phenyl urea were evaluated in vitro against three human tumor cell lines K562, MDA‐MB‐231, and HepG2. The results showed that most of the compounds have significant activity against the selected cell lines. Also, HepG2 cells were more sensitive to all the tested compounds than other cell lines. © 2011 Wiley Periodicals, Inc. Heteroatom Chem 23:74–83, 2012; View this article online at wileyonlinelibrary.com . DOI 10.1002/hc.20754     

An enaminone-directed benzannulation/macrocyclization approach to cyclophane ring systems

A straightforward and modular preparative approach to 1,3,5-triaroylbenzene-based functionalized cyclophane ring systems has been developed. The key cyclophane-forming macrocyclization reaction was accomplished during the course of a regioselective cross-benzannulation between bis(aryl ethynyl) ketone and enaminone reactants. Macrocyclic products with ring sizes ranging from 18- to 22-membered were successfully constructed. The composition of the tether connecting the two aryl ethynyl ketone fragments can be easily varied; consequently, this method is suitable for construction of a diverse range of structurally distinct cyclophane products. To illustrate this feature, cyclophanes possessing xylyl, alkyl, di(ethylene triamine), and di(ethylene oxy) bridging units were synthesized in isolated yields of 11-46%. Three new cyclophanes (calixarene-like macrocyles 8 and 9, as well as crownophane 18) were structurally characterized by X-ray diffractometry.     

Surface Interaction of Ionic Liquids: Stabilization of Polyethylene Terephthalate-Degrading Enzymes in Solution

The effect of aqueous solutions of selected ionic liquids solutions on Ideonella sakaiensis PETase with bis(2-hydroxyethyl) terephthalate (BHET) substrate were studied by means of molecular dynamics simulations in order to identify the possible effect of ionic liquids on the structure and dynamics of enzymatic Polyethylene terephthalate (PET) hydrolysis. The use of specific ionic liquids can potentially enhance the enzymatic hydrolyses of PET where these ionic liquids are known to partially dissolve PET. The aqueous solution of cholinium phosphate were found to have the smallest effect of the structure of PETase, and its interaction with (BHET) as substrate was comparable to that with the pure water. Thus, the cholinium phosphate was identified as possible candidate as ionic liquid co-solvent to study the enzymatic hydrolyses of PET.     

Polymeric membrane coated graphite cesium selective electrode based on 4′,4″(5′) di–tert-butyl di-benzo-18-crown-6

A new PVC membrane coated graphite electrode for cesium ion based on 4′,4″(5′)di–tert-butyl di-benzo-18-crown-6 (DTBDB18C6) as ionophore was prepared. The electrode shows a near Nernstian response of 57.0 ± 1.8 mV decade^?1 over a wide activity range of 6.0 × 10^?6–1.0 × 10^?1 mol L^?1 with a limit of detection 4.0 × 10^?6 mol L^?1. The proposed electrode is suitable for use in aqueous solution in the pH range of 3.0–9.5. It has a fast response time of 10 s and can be used for at least 1 month without any considerable divergence in potential. The selectivity coefficients for Cs⁺ ion with respect to ammonium, alkali, alkaline earth and some selected transition metal ions were determined and showed a superior selectivity over Li⁺, Na⁺ and alkaline earth metal ions. The new electrode was applied for determination of Cs⁺ in spiked tap water. The electrode was also used as indicator electrode in potentiometric titration of Cs⁺ with sodium tetraphenyl borate.