Efficient,Rapid, and Regioselective Bromination of Phenols and Anilines with N-Bromosaccharin Using Tungstophosphoric Acid as a Heterogeneous Recyclable Catalyst

A simple, efficient, and rapid method for high-yielding regioselective mono bromination of phenols and anilines has been achieved by treatment with N-bromasaccharin in the presence of a catalytic amount of tungstophosphoric acid.     

Synthesis of Novel Chiral Ionic Liquid and Its Application in Reduction of Prochiral Ketones to the Corresponding Chiral Alcohols Using NaBH4

A novel chiral ionic liquid (CIL) based on nicotinium salt has been synthesized and used as an efficient asymmetric chiral catalyst for reduction of acetophenone derivatives with NaBH₄ in methanol at room temperature. The optically active alcohols were obtained in low to moderate enantiomeric excess in a short reaction time.     

Efficient Synthesis of Bis-Coumarins Using Silica-Supported Preyssler Nanoparticles

Reaction of aldehydes and 4-hydroxycoumarin in the presence of catalytic amount of silica-supported Preyssler nanoparticles led to synthesis of bis-coumarins in excellent yields.     

Brønsted Acidic Ionic Liquids: New,Efficient, and Green Promoter System for the Synthesis of 4(3H)-Quinazolinones

A simple, inexpensive, and efficient new synthesis of 4(3H)-quinazolinones from the reaction of 2-aminobenzamide with aroyl chlorides in the presence of two new halogen-free Brønsted acidic ionic liquids, 3-methyl-1-(4-sulfonic acid)butylimidazolium hydrogen sulfate [(CH₂)₄SO₃HMIM][HSO₄] and 1-(4-sulfonic acid) butylpyridinium hydrogen sulfate [(CH₂)₄SO₃HPY][HSO₄], green and reusable catalysts, with excellent product yields under solvent-free conditions is reported. The products could be separated simply from the catalyst, and the catalyst could be recycled without noticeably decreasing the catalytic activity.     

Diammonium Hydrogen Phosphate as a Neutral and Efficient Catalyst for Synthesis of 1,8‐Dioxo‐octahydroxanthene Derivatives in Aqueous Media

A new and efficient method to synthesize a 3,3,6,6,9‐aryl‐1,8‐dioxo‐octahydroxanthene derivative using diammonium hydrogen phosphate as catalyst was performed in water at room temperature in a short periods.     

Spectral Investigations of Preferential Solvation and Solute–Solvent Interactions of Free Base and Protonated 5,10,15,20-Tetrakis(4-trimethyl-ammonio-phenyl)-porphine Tetratosylate in Aqueous Organic Mixed Solvents

The solvatochromic properties of the free base and the protonated 5,10,15,20-tetrakis(4-trimethyl-ammonio-phenyl)-porphine tetratosylate (TTMAPP) were studied in pure water, methanol, ethanol, 2-propanol, and their corresponding aqueous mixtures. The correlation of the empirical solvent polarity scale (E _T) values of TTMAPP with composition of the solvents were analyzed by the solvent exchange model of Bosch and Roses to clarify the preferential solvation of the probe dyes in the binary mixed solvents. The solvation shell composition effects in preferential solvation of the solute dyes were investigated in terms of both solvent–solvent and solute–solvent interactions and also the local mole fraction of each solvent composition was calculated in the cybotactic region of the probe. The effective mole fraction variation may provide significant physicochemical insights in the microscopic and molecular level of interactions between TTMAPP species and the solvent components and, therefore, can be used to interpret the solvent effect on kinetics and thermodynamics of TTMAPP.     

Graphene oxide reinforced polyamide nanocomposite coated on paper as a novel layered sorbent for microextraction by packed sorbent

ABSTRACT

In this work, a novel layered sorbent for microextraction by packed sorbent (MEPS) was introduced, which has been prepared by coating graphene oxide/polyamide (GO/PA) nanocomposite (NC) onto cellulose paper through solvent exchange method. Scanning electron microscopy (SEM) was applied to investigate the surface characteristic and morphology of PA and GO/PA NC coated on cellulose paper. The prepared MEPS device was used for extraction of organophosphorous pesticides (OPPs) including chlorpyrifos, fenthion, fenithrothion, ethion, edifenphos and phosalone in environmental aqueous samples followed by detection using gas chromatography-flame ionisation detector (GC-FID). Important parameters affecting the MEPS method including pH of sample solution, extraction draw-discard cycles, sorbent layers, desorption solvent volume and desorption draw-eject number were studied and optimised using central composite design (CCD). Based on the method validation, limits of detection (LODs) were in the range of 0.2–1 µg L^?1. The calibration graphs for chlorpyrifos, fenthion and edifenphos are linear in the concentration range of 1 to 500 µg L^?1; for ethion and phosalone are linear in the range of 1–1000 µg L^?1 and for fenithrothion is linear in the range of 3–1000 µg L^?1. The method precision (RSD %) with six replicates determinations was in the range of 3 to 9.4 % and 3.9 to 11.9% for distilled water and spiked river water sample, respectively, at the concentration level of 300 µg L^?1 . The developed method was applied successfully to determine OPP compounds in river, dam and tap water samples; accordingly, the relative recoveries (RR%) were obtained in the range of 77.8 to 113.3%.     

Uranium recovery from UCF liquid waste by nanoporous MCM-41: breakthrough capacity and elution behavior studies

Adsorption and recovery of uranium by nanoporous MCM-41 from aqueous solutions (synthetic solution and uranium conversion facility liquid waste) were investigated by use of a fixed-bed column (1.2 cm diameter and 3.0 cm height). Adsorption was carried out at flow rates 0.2 and 0.5 mL min^?1, which correspond to retention times of 10 and 6 min. The maximum breakthrough capacity for uranium ions was achieved by use of nanoporous MCM-41 at the optimum pH of 3.6 and flow rate 0.2 mL min^?1 (61.95 μg g^?1). The Thomas and Yan models were applied to the experimental data, by use of linear regression, to determine the characteristics of the column for process design. The breakthrough curves calculated from the models were in good agreement with the experimental data. The elution behavior of uranium on nanoporous MCM-41 was studied with different eluents; the results showed that 0.1 M HCl is good eluent for uranium recovery. The regenerated column could be used in a multitude of adsorption–desorption cycles.     

Structure and properties of NR/BR blend/clay nanocomposites prepared by the latex method

Rubber blend/clay nanocomposites based on the 50/50 (wt %) natural rubber/butadiene rubber was prepared by the latex method via mixing the latex of 50/50 NR/BR blend with different amounts of the aqueous sodium montmorillonite (Na-MMT) dispersion and co-coagulating the mixture. XRD and TEM were used to characterize structure of the nanocomposites. It was found that fully exfoliated structure could be obtained by this method only when the low loading of layered silicate (up to 5 phr) is used. With increasing the clay content, both non-exfoliated (stacked layers) and exfoliated structures can be observed simultaneously in the nanocomposites. Nanocomposites showed mechanical properties better than the clay-free volcanizate. Moreover, modulus, tensile strength, elongation at break and tear strength increased significantly by increasing the clay amount up to 5 phr and then remained almost constant by further increasing the clay content. Improvement in the mechanical properties by increasing the clay loading up to 5 phr was attributed to the nano-reinforcement effect of Na-MMT. TGA results indicated an improvement in the main decomposition temperature by increasing the clay amount.     

BSA optimization and dosimetric assessment for an electron linac based BNCT of deep‐seated brain tumors

A study was conducted to investigate a photoneutron spectrum based on a 25 MeV electron linac for treatment of deep-seated brain tumors in the context of boron neutron capture therapy (BNCT). Based on a series of Mont Carlo N-Particle simulations, tungsten and uranium with optimized geometry were selected as the most appropriate converters for (e,γ) and (γ,n) reactions, respectively. The final optimized photoneutron source yield was 5.78 × 10¹³ n/s/mA, which is a high value for these kinds of sources. A beam shaping assembly (BSA) for the proposed neutron source containing optimal moderators, filter, reflector, and collimator was simulated. Results showed that using this BSA enables us to meet International atomic energy agency recommended figures of merit at the BSA beam port. Also, the calculated in-phantom figures of merit and dose evaluation results via a simulated head phantom confirmed that the designed neutron source and its related BSA configuration can potentially treat deep-seated brain tumors in BNCT framework. In the present study, some in-phantom figures of merit such as advantage depth, advantage depth dose rate, advantage ratio, and treatment time are 7.6 cm, 0.7 Gy/min, 4.2, and 17.8 min, respectively.