Development of zirconium and potassium perchlorate igniter for AP/HTPB composite propellant base bleed grain

Journal of Thermal Analysis and Calorimetry - For effective and reliable ignition of ammonium perchlorate and hydroxyl-terminated polybutadiene (AP/HTPB) solid composite propellant base bleed (BB)...     

Effect of ring substitution on synthesis of benzimidazolium salts and their silver(I) complexes: characterization,electrochemical studies and evaluation of anticancer potential

Transition Metal Chemistry - A series of bidendate 5,6-dimethyl benzimidazolium-based N-heterocyclic carbene (NHC) proligands and their silver complexes were synthesized. The synthetic approaches...     

Polyaniline-nylon-6 electrospun nanofibers for headspace adsorptive microextraction

A headspace adsorptive microextraction technique was developed using a novel polyaniline-nylon-6 (PANI-N6) nanofiber sheet, fabricated by electrospinning. The homogeneity and the porosity of the prepared PANI-N6 sheet were studied using the scanning electron microscopy (SEM) and nanofibers diameters were found to be around 200 nm. The novel nanofiber sheet was examined as an extracting medium to isolate some selected chlorobenzenes (CBs), as model compounds, from aquatic media. The extracted analytes were desorbed using μL-amounts of solvent and eventually an aliquot of extractant was injected into gas chromatography–mass spectrometry (GC–MS). Various parameters affecting the extraction and desorption processes were optimized. The developed method proved to be convenient and offers sufficient sensitivity and a good reproducibility. Limits of detection achieved for CBs with the developed analytical procedure ranged from 19 to 33 ng L^?1, while limits of quantification were from 50 to 60 ng L^?1. The relative standard deviations (RSD) at a concentration level of 0.1 ng mL^?1 and 1 ng mL^?1 were in the range of 8–14% and 5–11% (n = 3), respectively. The calibration curves of analytes were investigated in the range of 50–1000 ng L^?1 and R² between 0.9739 and 0.9932 were obtained. The developed method was successfully applied to the extraction of selected CBs from tap and river water samples. The relative recovery (RR) percentage obtained for the spiked real water samples at 0.1 ng mL^?1 and 1 ng mL^?1 level were 93–103% and 95–104%, respectively. The whole procedure showed to be conveniently applicable and quite easy to handle.     

Antibacterial Properties of Intestinal Phospholipase A2 from the Common Stingray Dasyatis pastinaca

Stingray phospholipase A₂ group IIA (SPLA₂-IIA) was recently isolated and purified to homogeneity from the intestine of the common stingray Dasyatis pastinaca, suggesting that this enzyme plays an important role in systemic bactericidal defense. The present study showed that SPLA₂-IIA was highly bactericidal against Gram-positive bacteria with inhibition zones and minimal inhibitory concentration values in the range of 13–25 mm and 2–8 μg/ml, respectively, whereas Gram-negative bacteria exhibited a much higher resistance. The bactericidal efficiency of SPLA₂-IIA was shown to be unaffected by high protein and salt concentrations, but dependent upon the presence of calcium ions, and then correlated to the hydrolytic activity of membrane phospholipids. Importantly, we showed that stingray phospholipase A₂ group IIA presents no cytotoxicity after its incubation with MDA-MB-231 cells. SPLA₂-IIA may be considered as a future therapeutic agent against bacterial infections.     

Synthesis of new 3'-, 5-, and N(4)-modified 2'-O-methylcytidine libraries on solid support

A versatile solid phase combinatorial approach was developed and utilized for the rapid synthesis of new 2'-O-methylcytidine nucleoside libraries 1-7 containing 672 compounds with 3'-deoxy-3'-C-methyl, 3'-deoxy-3'-C-hydroxymethyl, and 5-alkyl/alkynyl modifications. The modified uridine scaffolds 8-10, 23-25, and 31 were loaded onto the 4-methoxytrityl chloride (MMT-Cl) polystyrene resin through the hydroxyl groups at the 5'-position as well as on the substituents at the 3'- and 5-positions. The scaffolds loaded on the resin were orthogonally protected by MMT group on the resin itself and TBDMS or acetyl protecting groups. The 4-position of the uridine derivatives was activated by 2,4,6-triisopropyl benzene sulfonyl chloride for further derivatization. The resins 14-16, 28-30, and 32 loaded with the corresponding activated scaffolds were reacted with the selected and validated amino building blocks in the 96 well format on the semiautomated synthesizer. The high-quality 2'-O-methylcytidine libraries 1-7 were thus generated and characterized by liquid chromatography-mass spectrometry (LC-MS) analysis with 63-99% successful rates.     

Chromatographic determination of sulfasalazine and its active metabolites: greenness assessment and application to spiked human plasma

Green TLC-densitometric and RP-HPLC methods were developed and validated for the determination of the active prodrug sulfasalazine (SZ), its active metabolite mesalazine (MZ) and the major active metabolite of mesalazine, N-acetyl-5-aminosalicylic acid (AS). In the developed TLC-densitometric method, chromatographic separation was carried out on TLC silica gel plates 60 F₂₅₄ using a developing system consisting of ethyl acetate–methanol–ammonia solution 33% (8:2.5:0.3, by volume) and then scanning the separated bands at 215 nm using hydrochlorothiazide as an internal standard with linearity ranges of 0.4–3, 0.4–2.4 and 0.3–2 for SZ, MZ and AS, respectively. The developed RP-HPLC method depended on chromatographic separation using a C₁₈ column with a solvent mixture of methanol–aqueous acetic acid solution (pH 5) as a mobile phase with gradient elution mode and UV scanning at 243 nm using pyrazinamide as internal standard with linearity ranges of 5–50, 5–40, and 3–20 for SZ, MZ and AS, respectively. US Food and Drug Administration guidelines were followed during validation of the methods. The greenness of the developed methods was estimated using the greenness profile and the Eco-Scale approach. Both methods passed the four quadrants of the greenness profile and had Eco-Scale score ˃75, thus they were considered to be green according to these approaches.     

Single-molecule magnet behavior for an antiferromagnetically superexchange-coupled dinuclear dysprosium(III) complex

A family of five dinuclear lanthanide complexes has been synthesized with general formula [Ln(III)(2)(valdien)(2)(NO(3))(2)] where (H(2)valdien = N1,N3-bis(3-methoxysalicylidene)diethylenetriamine) and Ln(III) = Eu(III)1, Gd(III)2, Tb(III)3, Dy(III)4, and Ho(III)5. The magnetic investigations reveal that 4 exhibits single-molecule magnet (SMM) behavior with an anisotropic barrier U(eff) = 76 K. The step-like features in the hysteresis loops observed for 4 reveal an antiferromagnetic exchange coupling between the two dysprosium ions. Ab initio calculations confirm the weak antiferromagnetic interaction with an exchange constant J(Dy-Dy) = -0.21 cm(-1). The observed steps in the hysteresis loops correspond to a weakly coupled system similar to exchange-biased SMMs. The Dy(2) complex is an ideal candidate for the elucidation of slow relaxation of the magnetization mechanism seen in lanthanide systems.     

An unbreakable on-line approach towards sol-gel capillary microextraction

In this work a novel unbreakable sol-gel-based in-tube device for on-line solid phase microextraction (SPME) was developed. The inner surface of a copper tube, intended to be used as a high performance liquid chromatography (HPLC) loop, was electrodeposited by metallic Cu followed by the self assembled monolayers (SAM) of 3-(mercaptopropyl) trimethoxysilane (3MPTMOS). Then, poly (ethyleneglycol) (PEG) was chemically bonded to the -OH sites of the SAM already covering the inner surface of the copper loop using sol-gel technology. The homogeneity and the porous surface structure of the SAM and sol-gel coatings were examined using the scanning electron microscopy (SEM) and adsorption/desorption porosimetry (BET). The prepared loop was used for online in-tube SPME (capillary microextraction) of some selected polycyclic aromatic hydrocarbons (PAHs), as model compounds, from the aquatic media. After extraction, the HPLC mobile phase was used for on-line desorption and elution of the extracted analytes from the loop to the HPLC column. Major parameters affecting the extraction efficiency including the sample flow rate through the copper tube, loading time, desorption time and sample volume were optimized. For investigating the sorbent efficiency, four loops based on the copper tube itself, the copper tube after electrodeposition with Cu and the tubes with the SAMs and SAMs-sol-gel coating were made and compared. The SAMs-sol-gel coated loop clearly shows a prominently lead of at least 20-100 times of higher efficiency. The linearity for the analytes was in the range of 0.01-500 μg L(-1). Limit of detection (LOD) was in the range of 0.005-0.5 μg L(-1) and the RSD% values (n=5) were all below 8.3% at the 5 μg L(-1) level. The developed method was successfully applied to real water samples while the relative recovery percentages obtained for the spiked water samples were from 90 to 104%. The prepared loop exhibited long life time due to its remarkable solvent and mechanical stability. Different solvents such as methanol, acetonitrile and acetone were passed through the loop for many days and it was also used for more than 100 extractions/desorption of the selected analytes and no decrease in the peak areas was observed.     

Preparation,characterization, and applications of a novel solid-phase microextraction fiber by sol-gel technology on the surface of stainless steel wire for determination of poly cyclic aromatic hydrocarbons in aquatic environmental samples

A novel solid-phase microextraction(SPME) fiber was prepared using sol–gel technology with ethoxylated nonylphenol as a fiber coating material. The fiber was employed to develop a headspace SPME–GC–MS method suitable for quantification of 13 polycyclic aromatic hydrocarbons (PAHs) in water samples. Surface characteristics of the fibers were inspected by energy dispersive X-ray (EDX) spectroscopy as well as by scanning electron microscopy (SEM). The SEM measurements showed the presence of highly porous nano-sized particles in the coating. Important parameters affecting the extraction efficiency such as extraction temperature and time, desorption conditions as well as ionic strength have been evaluated and optimized. In the next step, the validation of the new method have been performed, finding it to be specific in the trace analysis of PAHs, with the limit of detection (LOD) ranging from 0.01 to 0.5 μg L⁻¹ and the linear range from the respective LOD to 200 μg L⁻¹with RSD amounting to less than 8%. The thermal stability of the fibers was investigated as well and they were found to be durable at 280 °C for 345 min. Furthermore, the proposed method was successfully applied for quantification of PAHs in real water samples.     

A chitosan–polypyrrole magnetic nanocomposite as μ-sorbent for isolation of naproxen

An extracting medium based on chitosan–polypyrrole (CS–PPy) magnetic nanocomposite was synthesized by chemical polymerization of pyrrole at the presence of chitosan magnetic nanoparticles (CS-MNPs) for micro-solid phase extraction. In this work, magnetic nanoparticles, the modified CS-MNPs and different types of CS–PPy magnetic nanocomposites were synthesized. Extraction efficiency of the CS–PPy magnetic nanocomposite was compared with the CS-MNPs and Fe₃O₄ nanoparticles for the determination of naproxen in aqueous samples, via quantification by spectrofluorimetry. The scanning electron microscopy images obtained from all the prepared nanocomposites revealed that the CS–PPy magnetic nanocomposite possess more porous structure. Among different synthesized magnetic nanocomposites, CS–PPy magnetic nanocomposite showed a prominent efficiency. Influencing parameters on the morphology of CS–PPy magnetic nanocomposite such as weight ratio of components was also assayed. In addition, effects of different parameters influencing the extraction efficiency of naproxen including desorption solvent, desorption time, amount of sorbent, ionic strength, sample pH and extraction time were investigated and optimized. Under the optimum condition, a linear calibration curve in the range of 0.04–10 μg mL⁻¹ (R² = 0.9996) was obtained. The limits of detection (3S_b) and limits of quantification (10S_b) of the method were 0.015 and 0.04 μg mL⁻¹ (n = 3), respectively. The relative standard deviation for water sample spiked with 0.1 μg mL⁻¹ of naproxen was 3% (n = 5) and the absolute recovery was 92%. The applicability of method was extended to the determination of naproxen in tap water, human urine and plasma samples. The relative recovery percentages for these samples were in the range of 56–99%.