ITO‐free top emitting organic light emitting diodes with enhanced light out‐coupling

Bottom emitting organic light emitting diodes (OLEDs) can suffer from lower external quantum efficiencies (EQE) due to inefficient out‐coupling of the generated light. Herein, it is demonstrated that the current efficiency and EQE of red, yellow, and blue fluorescent single layer polymer OLEDs is significantly enhanced when a MoO_x(5 nm)/Ag(10 nm)/MoO_x(40 nm) stack is used as the transparent anode in a top emitting OLED structure. A maximum current efficiency and EQE of 21.2 cd/A and 6.7%, respectively, was achieved for a yellow OLED, while a blue OLED achieved a maximum of 16.5 cd/A and 10.1%, respectively. The increase in light out‐coupling from the top‐emitting OLEDs led to increase in efficiency by a factor of up to 2.2 relative to the optimised bottom emitting devices, which is the best out‐coupling reported using solution processed polymers in a simple architecture and a significant step forward for their use in large area lighting and displays.     

Effect of Hydrophilic/Hydrophobic Block Ratio and Temperature on the Surface and Associative Properties of Oxyethylene and Oxybutylene Diblock Copolymers in Aqueous Media

Recent development in dispersion science and technology demands block copolymers with a variable block length and composition. To highlight that purpose, the surface active, associative, colloidal, and thermodynamic behavior of three diblock copolymers having different hydrophilic to hydrophobic ratio is reported here. Using surface tension and light scattering measurements, the micellization and adsorption behavior of polyoxyethylene and polyoxybutylene diblock copolymers of the type E_mB_n have been analyzed. Critical micelle concentration (CMC) and related thermodynamic parameters like free energy (ΔG_mic), enthalpy (ΔH_mic), and entropy (ΔS_mic) of micellization were calculated from CMC value using the closed association model. Likewise, the surface active parameters, like surface excess concentration (Γ₂), area per molecule (A₂), and thermodynamic parameters such as free energy (ΔG_ads), enthalpy (ΔH_ads), and entropy (ΔS_ads) of adsorption of polymer at the air/water interface, were also calculated at various temperatures. Static and dynamic light scattering techniques were employed for the determination of the weight-average molar (M_w), association number (N_w), polymer–water interaction (A₂), and micellar size in terms of hydrodynamic radii (R_h) of copolymer micelles. The effect of block length and solution temperature on the surface and micellar properties of these copolymers was also investigated.     

Ag2S-石墨烯/TiO2的声化学法合成及可见光催化活性（英文）

Ag2S‐graphene/TiO2 composites were synthesized by a facile sonochemical method.The products were characterized by X‐ray diffraction,scanning electron microscopy,energy dispersive X‐ray spectroscopy,transmission electron microscopy,and UV‐Vis diffuse reflectance spectrophotometry.During the synthesis reaction,the reduction of graphene oxide and loading of Ag2S and TiO2 particles were achieved.The Ag2S‐graphene/TiO2 composites possessed a large adsorption capacity for dyes,an extended light absorption range,and efficient charge separation properties.Hence,in the photodegradation of rhodamine B,a significant enhancement in the reaction rate was observed with the Ag2S‐graphene/TiO2 composites as compared to pure TiO2.The generation of reactive oxygen species was detected by the oxidation of 1,5‐diphenyl carbazide to 1,5‐diphenyl carbazone.The high activity was attributed to the synergetic effects of high charge mobility and the red shift in the absorption edge of the Ag2S‐graphene/TiO2 composites.     

Facile One‐Pot Synthesis of 4‐Hydroxy‐2‐methyl‐(2H)‐1,2‐benzothiazine‐3‐sulfonic Acid 1,1‐Dioxide

We report a convenient synthesis of 4‐hydroxy‐2‐methyl‐(2H)‐1,2‐benzothiazine‐3‐sulfonic acid‐1,1‐dioxide (6a) prepared in a novel one‐pot reaction. The synthesis involves two transformations starting from 2‐methyl‐2H‐1,2‐benzothiazin‐4‐(3H)‐one 1,1‐dioxide (7) with an overall yield better than that from the stepwise process, as well as the alternate procedure starting from saccharin (1). One‐pot synthesis of an important intermediate, saccharin‐N‐methane sulfonic acid (4), is also described.     

Solubility of Nonsteroidal Anti-inflammatory Drugs (NSAIDs) in Aqueous Solutions of Non-ionic Surfactants

The solubilities of two nonsteroidal anti-inflammatory (MELOXICAM and CELECOXIB) drugs, were determined in aqueous solutions of nonionic (Tween 20, Tween 80, Brij 30, Brij 35, Triton X 100, Triton X 114) surfactants. These surfactants have different numbers of oxyethylene units and their micelles showed different aggregation numbers. It is shown that these surfactants have different abilities to solubilize NSAIDs drugs. The solubilities of the drugs increased linearly with the increase in concentration of surfactants. The sizes of micelles remained constant with the addition of the drugs, except for Triton type surfactants in which case the size of the micelles decreased. It was observed that the number of oxyethylene units in the surfactants, aggregation number of the micelles and HLB play key roles in solubilizing the drugs.     

Radiosynthesis and biological evaluation of <Superscript>99m</Superscript>TcN-sitafloxacin dithiocarbamate as a potential radiotracer for <Emphasis Type="Italic">Staphylococcus aureus</Emphasis> infection

Sitafloxacin dithocarbamate (SFDE) was synthesized, radiolabeled with technetium-99m (^99mTc) using [^99mTc-N]²⁺ core and evaluated its biological efficacy as a potential radiotracer for Staphylococcus aureus (S. aureus) infection in artificially infected rats (AIRT) and rabbits (AIRB). The radiochemical stability of the ^99mTc labeled SFDE (^99mTcN-SFDE) in saline and serum was determined by radio-HPLC and TLC methods, respectively. After, 1 min of reconstitution the value of radiochemical purity (RCP) was 99.00 ± 0.20% and was remained more than 90% unwavering even after 240 min of the radiolabeling. The ^99mTcN-SFDE complex showed similar radiochemical permanence behavior in serum at 37 °C. The complex showed almost six fold higher specific in vitro binding with living than heat killed S. aureus. Biodistribution behavior was evaluated in S. aureus AIRT and whole body imaging (WBI) in AIRB, respectively. Seven fold up take was observed in infected muscle of the AIRT as compared to inflamed and normal muscles. The disappearance of activity from blood and appearance in urinary system indicated normal route of excretion of the complex. Scintigraphically, it was confirmed that the labeled SFDE was higher accumulated in the infected muscle higher than in inflamed and normal muscle. The high radiochemical stability in saline and serum, specific in vitro binding with S. aureus, precise in vivo distribution in S. aureus AIRT and targeted WBI in AIRB confirmed the possibility of the ^99mTcN-SFDE complex as a potential and promising S. aureus infection radiotracer.     

Ion-induced kinetic electron emission from 6LiF,7LiF and MgF2 thin films

<正>Secondary electron yields for Ar~+ impact on ~6LiF,~7LiF and MgF_2 thin films grown on aluminum substrates are measured each as a function of target temperature and projectile energy.Remarkably different behaviours of the electron yields for LiF and MgF_2 films are observed in a temperature range from 25℃to 300℃.The electron yield of LiF is found to sharply increase with target temperature and to be saturated at about 175℃.But the target temperature has no effect on the electron yield of MgF_2.It is also found that for the ion energies greater than 4 keV,the electron yield of ~6LiF is consistently high as compared with that of ~7LiF that may be due to the enhanced contribution of recoiling ~6Li atoms to the secondary electron generation.A comparison between the electron yields of MgF_2 and LiF reveales that above a certain ion energy the electron yield of MgF_2 is considerably low as compared with that of LiF.We suggest that the short inelastic mean free path of electrons in MgF_2 can be one of the reasons for its low electron yield.     

MXenes as Emerging Materials: Synthesis,Properties, and Applications

Due to their unique layered microstructure, the presence of various functional groups at the surface, earth abundance, and attractive electrical, optical, and thermal properties, MXenes are considered promising candidates for the solution of energy- and environmental-related problems. It is seen that the energy conversion and storage capacity of MXenes can be enhanced by changing the material dimensions, chemical composition, structure, and surface chemistry. Hence, it is also essential to understand how one can easily improve the structure–property relationship from an applied point of view. In the current review, we reviewed the fabrication, properties, and potential applications of MXenes. In addition, various properties of MXenes such as structural, optical, electrical, thermal, chemical, and mechanical have been discussed. Furthermore, the potential applications of MXenes in the areas of photocatalysis, electrocatalysis, nitrogen fixation, gas sensing, cancer therapy, and supercapacitors have also been outlooked. Based on the reported works, it could easily be observed that the properties and applications of MXenes can be further enhanced by applying various modification and functionalization approaches. This review also emphasizes the recent developments and future perspectives of MXenes-based composite materials, which will greatly help scientists working in the fields of academia and material science.     

A Novel Image Encryption Scheme Based on Elliptic Curves over Finite Rings

Image encryption based on elliptic curves (ECs) is emerging as a new trend in cryptography because it provides high security with a relatively smaller key size when compared with well-known cryptosystems. Recently, it has been shown that the cryptosystems based on ECs over finite rings may provide better security because they require the computational cost for solving the factorization problem and the discrete logarithm problem. Motivated by this fact, we proposed a novel image encryption scheme based on ECs over finite rings. There are three main steps in our scheme, where, in the first step, we mask the plain image using points of an EC over a finite ring. In step two, we create diffusion in the masked image with a mapping from the EC over the finite ring to the EC over the finite field. To create high confusion in the plain text, we generated a substitution box (S-box) based on the ordered EC, which is then used to permute the pixels of the diffused image to obtain a cipher image. With computational experiments, we showed that the proposed cryptosystem has higher security against linear, differential, and statistical attacks than the existing cryptosystems. Furthermore, the average encryption time for color images is lower than other existing schemes.     

Effects of pH and Ionic Salts on the Emulsifying and Rheological Properties of Acorn Protein Isolate

This study was designed to evaluate the emulsifying and rheological properties of acorn protein isolate (API) in different pH mediums (pH 3, 7 and 9) and in the presence of ionic salts (1 M NaCl and 1 M CaCl₂). API shows higher solubility in distilled water at pH 7, while at the same pH, a decrease in solubility was observed for API in the presence of CaCl₂ (61.30%). A lower emulsifying activity index (EAI), lower stability index (ESI), larger droplet sizes and slight flocculation were observed for API in the presence of salts at different pHs. Importantly, CaCl₂ treated samples showed relevantly higher EAI (252.67 m²/g) and ESI (152.67 min) values at all pH as compared to NaCl (221.76 m²/g), (111.82 min), respectively. A significant increase in interfacial protein concentration (4.61 mg/m²) was observed for emulsion at pH 9 with CaCl₂, while the major fractions of API were observed in an interfacial layer after SDS-PAGE analysis. All of the emulsion shows shear thinning behavior (τ_c > 0 and n < 1), while the highest viscosity was observed for emulsion prepared with CaCl₂ at pH 3 (11.03 ± 1.62). In conclusion, API, in the presence of ionic salts at acidic, neutral and basic pH, can produce natural emulsions, which could be substitutes for synthetic surfactants for such formulations.