Effects of self-fields on electron trajectory and gain in two-stream electromagnetically pumped free-electron laser with ion channel guiding

A theory for the two-stream free-electron laser with an electromagnetic wiggler (EMW) and an ion channel guiding is developed.In the analysis,the effects of self-fields have been taken into account.The electron trajectories and the small signal gain are derived.The stability of the trajectories,the characteristics of the linear gain and the normalized maximum gain are studied numerically.The dependence of the normalized frequency ω corresponding to the maximum gain on the ion-channel frequency is presented.The results show that there are seven groups of orbits in the presence of the self-fields,which are similar to those reported in the absence of the self-fields.It is also shown that the normalized gains of 2 groups decrease while the rest increase with the increasing normalized ion-channel frequency.Furthermore,it is found that the two-stream instability and the self-field lead to a decrease in the maximum gain except for group 4.     

In silico studies of novel scaffold of thiazolidin-4-one derivatives as anti-Toxoplasma gondii agents by 2D/3D-QSAR,molecular docking,and molecular dynamics simulations

Structural Chemistry - Toxoplasma gondii is an obligate intracellular protozoa that can infect a wide variety of warm-blooded animals and humans. It was claimed that novel anti-Toxoplasma gondii...     

Conversion coefficients and E0 transitions in102, 104, 106Pd

In in-beam (p, p′) experiments, electron and γ-spectra were measured in the electron energy range of 500-1840 keV for¹⁰²Pd and¹⁰⁴Pd, and 600–1580 keV for¹⁰⁶Pd. The conversion coefficients of all transitions in this range were obtained with accuracies of about 20%, in some favourable cases 10%. Special attention was given to 0⁺′-0⁺ transitions from the two-phonon triplets to the ground states with the following results for the branching ratios 0⁺′-0⁺ (ground state) to 0⁺′-2⁺ (one-phonon state):¹⁰²Pd:T _k (E0)/T _γ (E2)<(2.1±3.6)·10^{?7 104}Pd:T _k (E0)/T _γ (E2)=(6.0±1.4)·10^{?5 106}Pd:T _k (E0)/T _γ (E2)=(6.0±2.0)·10^?4     

Ultrasensitive aptamer-based on-off assay for lysozyme using a glassy carbon electrode modified with gold nanoparticles and electrochemically reduced graphene oxide

The authors describe an electrochemical aptamer based assay for the determination of the serine protease lysozyme in very low (pM) concentrations. The method is based on the formation of a complex between anti-lysozyme aptamer fragments and lysozyme, and on electrochemical detection by differential pulse voltammetry (DPV) and electrochemical impedance spectroscopy (EIS). The surface of a glassy carbon electrode was modified with a nanocomposite consisting of gold nanoparticles and electrochemically reduced graphene oxide nanosheets (AuNPs/erGO), and the thiolated aptamer was then linked to the AuNPs by self-assembly through Au-S bonds. The interaction of immobilized aptamers with lysozyme leads to the decreased peak current in DPV and increased charge transfer resistance (R_ct) in EIS when using hexacyanoferrate or Methylene Blue as a redox probe. The calibration plot, when applying EIS and working at a typical voltage of ?0.22 V (vs. SCE), is linear over 1.0 to 104.3 pM concentration range, with a detection limit of 0.06 pM (at a signal-to-noise ratio of 3). The respective data for DPV are a 9.6–205.5 pM linear range with a detection limit of 0.24 pM. Depending on the redox marker applied, the method works in the “signal-off” or “signal-on” mode in DPV and EIS protocols, respectively. The sensing interface is high specific for lysozyme and not affected by other proteins. The method was applied to the determination of lysozyme in spiked diluted human serum, and the results agreed well with data obtained with a standard ELISA.

Open image in new window

Graphical abstract The surface of a glassy carbon electrode was modified with a nanocomposite consisting of gold nanoparticles and electrochemically reduced graphene oxide nanosheets (AuNPs/erGO). Then, the thiolated aptamer was linked to the AuNPs by self-assembly through Au-S bonds. The modified electrode was applied to the determination of lysozyme with “signal off” and “signal on” strategies.

     

Synthesis of α‐[5‐(5‐amino‐1,3,4‐thiadiazol‐2‐yl)‐2‐imidazolylthio]acetic acids

The paper describes synthesis and antituberculosis activity of α‐[5‐(5‐amino‐1,3,4‐thiadiazol‐2‐yl)‐imidazol‐2‐ylthio]acetic acids ( 5a,b ). The compounds were tested against Mycobacterium tuberculosis strain H37Rv in comparison to rifampicin. Compounds exhibited low activity (MIC ≤ 6.25 μg/ml, % inhibition ≥ 24).     

Ultrasonic assistance syntheses of new nano-sized lead(II) coordination polymers: motifs for PbO preparation

Nanoparticles of two new coordination polymers, [Pb(5,5′-dm-2,2′-bpy)Cl₂] _n (1) and [Pb(5,5′-dm-2,2′-bpy)Br₂] _n (2), {5,5′-dm-2,2′-bpy = 5,5′-dimethyl-2,2′-bipyridine}, have been synthesized by ultrasonic assistance at different concentrations and characterized by scanning electron microscopy, X-ray powder diffraction, IR spectroscopy and elemental analyses. Metal oxide nanoparticles were prepared from thermal decomposition of compounds 1 and 2 at 600 °C under air atmosphere. Scanning electron microscopy images of the residue which are obtained from calcination of compounds 1, 2 show the formation of lead(II) oxide nanoparticles with an average diameter of about 80 and 90 nm for compounds 1 and 2, respectively.     

A rigorous analysis of simultaneous heat and mass transfer in the pasta drying process

This study presents a two dimensional analysis of coupled heat and mass transfer during the process of pasta drying. Velocity and temperature distributions of air flowing around the pasta are predicted in steady state condition. Using these profiles and the similarity between heat and mass boundary layers, local convective heat and mass transfer coefficients were determined on different points of pasta surface. By employing these values, the solution of coupled heat and mass transfer equations within the pasta object in unsteady state condition was obtained. Furthermore the effects of operating conditions such as velocity, temperature and relative humidity of air flow on drying rate of pasta were studied. Sensitivity analysis results show that the effects of air temperature and relative humidity on the rate of drying are more important than the effect of air velocity. Finally, the results obtained from this analysis were compared with the experimental data reported in the literatures and a good agreement was observed while, no adjustable parameter is used in the presented model.     

The effects of self-fields on the electron trajectory in a two-stream free electron laser with a helical wiggler and an axial guiding magnetic field

A theory for the two-stream free-electron laser(TSFEL) with a helical wiggler and an axial guide magnetic field is developed.In the analysis,the effects of self-fields are taken into account.An analysis of the two-stream steady-state electron trajectories is given by solving the equation of motion.Numerical calculations show that there are seven groups of orbits in the presence of self-fields instead of two groups reported in the absence of self-fields.The stability of the trajectories is studied numerically.     

Gain enhancement in two-stream free electron laser with planar wiggler and axial guide magnetic field

The theory for the two-stream free electron laser (FEL) consisting of a relativistic electron beam transported along the axis of a planar wiggler in the presence of an axial guiding magnetic field is proposed and investigated. The electron trajectories and the small signal gain are derived. The characteristic of the linear gain and the normalized maximum gain are studied numerically. The result shows that the normalized maximum gain is considerably enhanced in comparison with that of the single stream. The effect of the difference between the energies of the two beams in this configuration of FEL is also considered, and we find that the gain is affected by the energy differences between groups 1 and 2.     

Preparation and characterization of novel PES‐(SiO2‐g‐PMAA) membranes with antifouling and hydrophilic properties for separation of oil‐in‐water emulsions

In the present study, modification of nanoparticles (NPs) was investigated to mitigate aggregation of SiO₂ nanoparticles and improve the polymeric membrane's performance. For this purpose, the surface of SiO₂ nanoparticles was activated with amine groups, and polymethacrylic acid (PMAA) was grafted on the surface of NPs by atom transfer radical polymerization. Modified NPs were characterized by Fourier transform infrared spectroscopy (FTIR) and thermogravimetric analysis (TGA) tests. Polyethersulfone (PES) membranes were fabricated with both SiO₂ and SiO₂‐g‐PMAA NPs via nonsolvent‐induced phase separation method. The fabricated membranes were characterized regarding their permeability, hydrophilicity, and porosity properties, and their separation efficiency was tested using the synthetic oil‐in‐water emulsion. The surface and cross‐sectional morphologies of membranes were observed by field emission scanning electron microscopy (FESEM). The experimental trials showed that modified NPs dispersed more uniformly in the structure of membranes and hydroxyl groups on the surface of NPs acted more effectively. Modification of NPs enhance the membrane performance in terms of permeate flux, hydrophilicity, and porosity. NPs modification improved the permeate flux about 46%. Oil rejection for all tested membranes was more than 98%, and modification of NPs did not reduce the rejection of membranes. The optimum concentration was obtained as 1 wt.% and 1.5 wt.% for SiO₂ and SiO₂‐g‐PMAA, respectively. Aggregation effect dominated at concentrations beyond the optimum values that decreased the permeate flux, consequently.