Laser induced thermal lens spectrometry for cobalt determination after cloud point extraction

A new approach, employing cloud point extraction (CPE) in combination with thermal lens spectrometry (TLS), has been developed for the determination of cobalt. The CPE and TLS methods have good matching conditions for combination because TLS is suitable for low volume samples obtained after CPE and for organic solvents, which are used for dissolving the remaining analyte phase.1-(2-Pyridylazo)-2-naphthol (PAN) was used as a complexing agent and octylphenoxypolyethoxyethanol (Triton X-114) was added as a surfactant; then the pH of solution was adjusted. After phase separation at 50 °C based on the cloud point extraction of the mixture, the surfactant-rich phase was dried and the remaining phase was dissolved using 20 μL of carbon tetrachloride. The obtained solution was introduced into the quartz micro cell and the analyte was determined by thermal lens spectrometry. The He-Ne laser (632.8 nm) was used as both the probe and the excite source.Under optimum conditions, the analytical curve was linear for the concentration range of 0.2-40 ng mL⁻¹ and the detection limit was 0.03 ng mL⁻¹. The enhancement factor of 470 was achieved for a 10 mL sample. Relative standard deviations were lower than 5%.The method was successfully applied to the extraction and determination of cobalt in tap, river and sea water.     

Synthesis of salicylaldehyde-modified mesoporous silica and its application as a new sorbent for separation, preconcentration and determination of uranium by inductively coupled plasma atomic emission spectrometry

A new functionalized mesoporous silica (MCM-41) using salicylaldehyde was utilized for the separation, preconcentration and determination of uranium in natural water by inductively coupled plasma atomic emission spectrometry (ICP-AES).Experimental conditions for effective adsorption of trace levels of U(VI) were optimized. The preconcentration factor was 100 (1.0 mL of elution for a 100 mL sample volume). The analytical curve was linear in the range 2-1000 μg L⁻¹ and the detection limit was 0.5 ng mL⁻¹. The relative standard deviation (R.S.D.) under optimum conditions was 2.5% (n = 10). Common coexisting ions did not interfere with the separation and determination of uranium at pH 5. The sorbent exhibited excellent stability and its sorption capacity under optimum conditions has been found to be 10 mg of uranium per gram of sorbent. The method was applied for the recovery and determination of uranium in different water samples.     

Extraction and preconcentration of ultra trace amounts of beryllium from aqueous samples by nanometer mesoporous silica functionalized by 2,4-dihydroxybenzaldehyde prior to ICP OES determination

A new functionalized nanometer mesoporous silica (MCM-41) using 2,4-dihydroxybenzaldehyde (4-OHsal) was applied as an effective sorbent for solid phase extraction (SPE) of beryllium ions from aqueous solution followed by inductively coupled plasma optical emission spectrometric detection (ICP OES). The influences of some analytical parameters on the quantitative recoveries of the analyte ion were investigated in batch method. In order to perform the batch mode of SPE, known amount of sorbent was added to a test tube containing sample solution buffered at pH 7.2. After manual shaking and centrifugation the aqueous phase was decanted and beryllium was desorbed by adding 1.0 mL of 1.0 mol L^?1 HNO₃ to the sedimented sorbent. The sorbent was separated by centrifugation and the concentration of beryllium in the supernatant was determined by ICP OES. The maximum sorption capacity of the modified MCM-41 was found to be 34 mg g^?1. The sorbent exhibited good stability, reusability and fast rate of equilibrium for sorption/desorption of beryllium ions. The present method was used for preconcentration and determination of beryllium for water samples. Under optimal conditions, the limit of detection (LOD) obtained was 0.3 ng L^?1. The accuracy of the procedure was evaluated by analysis of the certified reference material (NIST 1640).     

Solid phase microextraction with gas chromatography-mass spectrometry: a very rapid method for identification of volatile organic compounds emitted by Carum copticum

The investigation of flower scent represents an important field of modern biological research which is directed towards special theories of biological recognition. The headspace solid phase microextraction coupled with gas chromatography-mass spectrometry was used to identify the volatile components of Carum copticum (C. copticum) cultivated in Iran. The compounds were identified according to their retention indices and mass spectra (EI, 70 eV). The effects of different parameters, such as the desorption time, the extraction temperature, the sample mass, the addition of salt, the pre-equilibration time and the extraction time, on the extraction efficiency were investigated. The optimized conditions were: the desorption time, 2 min; the extraction temperature, 58 degrees Celsius; the sample mass, 1.000 g in 4.0 mL 2.0 M NaCl solution; the pre-equilibration time, 25 min; the extraction time, 20 min. Finally, ten components were identified in the volatile components of C. copticum. The major components of C. copticum were thymol (68.2%), gamma-terpinene (13.9%), p-cymene (11.6%), myrcene (1.0%) and beta-pinene (0.6%). Precision of the proposed method is good and %RSD less than 14 was obtained.     

Head-to-Tail Dimerization of N-Heterocyclic Diazoolefins

The head-to-tail dimerization of N-heterocyclic diazoolefins is described. The products of these formal (3+3) cycloaddition reactions are strongly reducing quinoidal tetrazines. Oxidation of the tetrazines occurs in a stepwise fashion, and we were able to isolate a stable radical cation and diamagnetic dications. The latter are also accessible by oxidative dimerization of diazoolefins.     

Pseudocapacitive Lithium Storage of Cauliflower-Like CoFe2O4 for Low-Temperature Battery Operation

Binary transition-metal oxides (BTMOs) with hierarchical micro–nano-structures have attracted great interest as potential anode materials for lithium-ion batteries (LIBs). Herein, we report the fabrication of hierarchical cauliflower-like CoFe₂O₄ (cl-CoFe₂O₄) via a facile room-temperature co-precipitation method followed by post-synthetic annealing. The obtained cauliflower structure is constructed by the assembly of microrods, which themselves are composed of small nanoparticles. Such hierarchical micro–nano-structure can promote fast ion transport and stable electrode–electrolyte interfaces. As a result, the cl-CoFe₂O₄ can deliver a high specific capacity (1019.9 mAh g⁻¹ at 0.1 A g⁻¹), excellent rate capability (626.0 mAh g⁻¹ at 5 A g⁻¹), and good cyclability (675.4 mAh g⁻¹ at 4 A g⁻¹ for over 400 cycles) as an anode material for LIBs. Even at low temperatures of 0 °C and −25 °C, the cl-CoFe₂O₄ anode can deliver high capacities of 907.5 and 664.5 mAh g⁻¹ at 100 mA g⁻¹, respectively, indicating its wide operating temperature. More importantly, the full-cell assembled with a commercial LiFePO₄ cathode exhibits a high rate performance (214.2 mAh g⁻¹ at 5000 mA g⁻¹) and an impressive cycling performance (612.7 mAh g⁻¹ over 140 cycles at 300 mA g⁻¹) in the voltage range of 0.5–3.6 V. Kinetic analysis reveals that the electrochemical performance of cl-CoFe₂O₄ is dominated by pseudocapacitive behavior, leading to fast Li⁺ insertion/extraction and good cycling life.     

Nano- and micro-structure tin (IV) complexes bearing 4-pyridinecarbacylamidophosphate: Sonochemical synthesis,crystal structure,anti-cholinesterase activity,and docking studies

Two di- and triorganotin (IV) complexes, Sn (CH₃)₂Cl₂(4-PCAPh)₂ ( C ₁ ) and Sn(C₆H₅)₃Cl(4-PCAPh) ( C ₂ ); {4-PCAPh = 4-NC₅H₄C(O)NHP(O)(C₆H₁₂N)₂}, have been synthesized and characterized by elemental analysis, ¹H, ¹³C, ³¹P NMR and IR spectroscopy. The crystal structure of C ₁ has been confirmed by X-ray crystallography, which reveals an octahedral geometry surrounding Sn (IV). Both ligands function in an all-trans conformation, with an N-ligated mode for 4-PCAPh. Also, the complexes were prepared at nano- ( Ć ₁ ) and micro-size ( Ć ₂ ) by the sonochemical process. The role of reaction solvent and the concentration of initial reactants on the size and morphology of particles were studied and the products were characterized by X-ray powder diffraction (XRPD) and scanning electron microscopy (SEM). The activities and mechanism of complexes C ₁ , C ₂ , Ć ₁ , Ć ₂ and their corresponding ligand ( L ) on cholinesterase (ChE) were evaluated using a modified Ellman's method and Lineweaver-Burk plots. Nanosheet Ć ₁ showed the best activity against AChE and BChE with the IC₅₀ values being 73.08 ± 0.12 μM and 122.48 ± 0.69 μM, respectively, and the mixed-type mechanism. Molecular modeling simulation revealed the binding interaction template for Sn (CH₃)₂Cl₂(4-PCAPh)₂ with the ChE.     

Metal organic framework–derived core-shell CuO@NiO nanosphares as hole transport material in perovskite solar cell

Journal of Solid State Electrochemistry - Cu-Ni bimetallic organic frameworks were synthesized by a facile and stepwise solvothermal method, utilizing metal organic framework as precursor....     

Anti-icing performance of superhydrophobic surfaces

This article studies the anti-ice performance of several micro/nano-rough hydrophobic coatings with different surface chemistry and topography. The coatings were prepared by spin-coating or dip coating and used organosilane, fluoropolymer or silicone rubber as a top layer. Artificially created glaze ice, similar to the naturally accreted one, was deposited on the nanostructured surfaces by spraying supercooled water microdroplets (average size ∼80 μm) in a wind tunnel at subzero temperature (−10 °C). The ice adhesion strength was evaluated by spinning the samples in a centrifuge at constantly increasing speed until ice delamination occurred. The results show that the anti-icing properties of the tested materials deteriorate, as their surface asperities seem to be gradually broken during icing/de-icing cycles. Therefore, the durability of anti-icing properties appears to be an important point for further research. It is also shown that the anti-icing efficiency of the tested superhydrophobic surfaces is significantly lower in a humid atmosphere, as water condensation both on top and between surface asperities takes place, leading to high values of ice adhesion strength. This implies that superhydrophobic surfaces may not always be ice-phobic in the presence of humidity, which can limit their wide use as anti-icing materials.