Determination of environmentally important metal ions by fluorescence quenching in anionic micellar solution

This work describes the effect of a variety of metal ions as quenchers of the fluorescence of naphthalene, in aqueous micellar solutions of sodium dodecyl sulfate (SDS). The quenching by the metal ions can be adequately described by the Stern-Volmer equation and the best signal to noise ratios are obtained with low micellized detergent concentrations. Apparent Stern-Volmer constants decrease in the order: Fe3+ > Cu2+ > Pb2+ > Cr3+ > Ni2+ and directly reflect the relative sensitivity of the method for these ions. Detection limits (defined as three times the standard deviation of the blank for n= 10) for the fluorescence quenching of naphthalene by the metal ions in aqueous micellar SDS are in the range of 1.0 x 10(-6) to 1.0 x 10(-5) mol dm(-3). The proposed fluorescence quenching method shows good repeatibility for a variety of added quencher metal ions, indicating that anionic micelle-enhanced fluorescence quenching by metal ions constitutes an analytical method of rather general application.     

Facile Synthesis and Characterization of 5-[(3-Methylthiophene-2-yl-methyleneamino)]-2-mercaptobenzimidazole and Its Potentiometric Sensor Application in a Polyvinyl Chloride Membrane for the Determination of Copper(II)

A novel Schiff base designated as 5-[(3-methylthiophene-2-yl-methyleneamino)]-2-mercaptobenzimidazole was synthesized and characterized. A polyvinyl chloride-membrane potentiometric copper(II)-selective sensor was prepared by using the synthesized 5-[(3-methylthiophene-2-yl-methyleneamino)]-2-mercaptobenzimidazole compound. The prepared polyvinyl chloride-membrane copper(II)-selective sensor exhibited very good selectivity and sensitive potentiometric response towards copper(II) ions compared to a wide variety of other cations. The sensor had a fast response time of <5?s, and showed a linear Nerstian behavior to copper(II) ions over a wide concentration range from 1.0?×?10^?5 to 1.0?×?10^?1 mol L^?1 with a slope of 29.2?±?0.7 and correlation coefficient of 0.9998. The prepared polyvinyl chloride-membrane copper(II)-selective sensor was used for 14 weeks without any significant change in its potentiometric response. The potentiometric response of the developed sensor was highly repeatable. Additionally, the developed sensor was used as an indicator electrode for the potentiometric titration of copper(II) ion with ethylenediaminetetraacetic acid. The sensor was also successfully applied to the direct determination of copper(II) ions in tap water, river water, and dam water samples.     

A comparative analysis of machine learning techniques and fuzzy analytic hierarchy process to determine the tacit knowledge criteria

Knowledge management is widely considered as a strategic tool to increase firm performance by enabling the reuse of organizational knowledge. Although many have studied knowledge management in a variety of business settings, the concept of tacit knowledge, especially the individual one, has not been explored in due detail. The objective of this study is to identify and prioritize individual tacit knowledge criteria and to explain their effects on firm performance. In the proposed methodology, first, the most prevalent individual tacit knowledge variables are identified by means of knowledge elicitation and feature selection methods. Then, the extracted variables were prioritized using machine learning methods and fuzzy Analytic Hierarchy Process (AHP). Support vector machine (SVM), logistic regression, and artificial neural networks are used as the first approach, followed by fuzzy AHP as the second approach. Based on the comparative analysis results, SVM (as the best-performed machine-learning technique) and fuzzy AHP methods were identified for the subsequent analysis. The results showed that both SVM and fuzzy AHP determined time efficiency of employees, communication between employees and supervisors, and innovative capability of employees as the most important tacit knowledge criteria. These findings are mostly supported by the extant literature, and collectively shows the synergistic nature of the utilized analytics approaches in determining individual tacit knowledge criteria.

     

Supramolecular inclusion complexes of a star polymer containing cholesterol end‐capped poly(ε‐caprolactone) arms with β‐cyclodextrin

A novel hexa‐armed and star‐shaped polymer containing cholesterol end‐capped poly(ε‐caprolactone) arms emanating from a phosphazene core (N₃P₃‐(PCL‐Chol)₆) was synthesized by a combination of ring‐opening polymerization and “click” chemistry techniques. For this purpose, the terminal ? OH groups of the synthesized precursor (N₃P₃‐(PCL‐OH)₆) were converted into –Chol through a series of reaction. Both N₃P₃‐(PCL‐OH)₆ and N₃P₃‐(PCL‐Chol)₆ were then employed in the preparation of supramolecular inclusion complexes (ICs) with β‐cyclodextrin (β‐CD). The latter formed ICs with β‐CD in higher yield. The host–guest stoichiometry (ε‐CL:β‐CD, mol:mol) in the ICs of N₃P₃‐(PCL‐Chol)₆ was found to be 1.2. The formation of supramolecular ICs of N₃P₃‐(PCL‐Chol)₆ with β‐CD was confirmed by using Fourier transform infrared (FTIR) and ¹H nuclear magnetic resonance (NMR) spectroscopic methods, wide‐angle X‐ray diffraction (WAXD), and thermal analysis techniques. WAXD data showed that the obtained ICs with N₃P₃‐(PCL‐Chol)₆ had a channel‐type crystalline structure, indicating the suppression of the original crystallization of N₃P₃‐(PCL‐Chol)₆ in β‐CD cavities. Moreover, the thermal stabilities of ICs were found to be higher than those of the free star polymer and β‐CD. Furthermore, the surface properties of N₃P₃‐(PCL‐Chol)₆ and its ICs with β‐CD were investigated by static contact angle measurements. The obtained results proved that the wettability of N₃P₃‐(PCL‐Chol)₆ successfully increased with the formation of its ICs with β‐CD. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 3406–3420     

Direct Synthesis of Allylic Thioethers Under Greener Conditions: A Solvent- and Catalyst-Free Approach

We present herein a new catalyst-free and solvent-free approach for the synthesis of allylic thioethers directly from allylic alcohols and thiols. The methodology allows the synthesis of different allylic thioethers in good to excellent yields under microwave irradiation. Theoretical calculations for the allylic carbocation helped to explain the regioselectivity observed when nonsymmetric substrates are used in the reaction.     

The boundaries of the solutions of the linear Volterra integral equations with convolution kernel

Some boundaries about the solution of the linear Volterra integral equations of the second type with unit source term and positive monotonically increasing convolution kernel were obtained in Ling, 1978 and 1982. A method enabling the expansion of the boundary of the solution function of an equation in this type was developed in I. Özdemir and Ö. F. Temizer, 2002.

In this paper, by using the method in Özdemir and Temizer, it is shown that the boundary of the solution function of an equation in the same form can also be expanded under different conditions than those that they used.

     

One-dimensional solidification of pure materials with a time periodically oscillating temperature boundary condition

A finite difference method is used to solve a one-dimensional solidification problem with a periodic boundary condition prescribed at the bottom of the mold of finite thickness. The temperature distributions in the solidified shell and mold, the position of the moving freezing front, and its velocity are evaluated. Analytical results are obtained for the limiting cases and then compared with the numerical predictions to establish the validity of the model and the numerical approach. Interactive effects of the process parameters such as Stefan number of the solidified shell material, the mold thickness, the thermal conductivity and thermal diffusivity between the shell and mold materials on the evolution of the freezing front and its velocity are investigated in detail. The results show that the solidified materials with larger Stefan number grow slower than those with relatively smaller Stefan number. The impact of oscillating mold temperature boundary on the growth of shell thickness is particularly significant at earlier stages of the process and more pronounced for smaller Stefan numbers. Increasing mold thickness or thermal conductivity ratio between the shell and mold materials slows down the evolution of the shell thickness.     

Evaluation of high hydrostatic pressure effects on bovine red blood cells and platelets

The objective of this study was to investigate the effects of high hydrostatic pressure (HHP) on the stability of red blood cells (RBCs) and platelets. Bovine blood cells (n=5) were treated with the pressure of 55, 110, 154 and 220 MPa at 25 °C for 5 min. Light microscopy, atomic force microscopy and flow cytometry studies revealed that RBCs were morphologically stable up until the 220 MPa pressure treatments, at which surface modifications were observed. The platelets were found to be less stable than RBCs. HHP application did not cause any significant change in the signal intensity, band area and frequency values of the infrared bands with the exception that a significant variation was observed in the area of the cholesterol band. No statistically significant variations were observed in the secondary structure elements due to HHP treatment according to the artificial neural network study based on the FTIR data.     

Dynamic analysis of linear viscoelastic cylindrical and conical helicoidal rods using the mixed FEM

The objective of this study is to investigate the influence of the rotary inertia on dynamic behavior of linear viscoelastic cylindrical and conical helixes by means of the Laplace transform-mixed finite element formulation and solution. The element matrix is based on the Timoshenko beam theory. The influence of rotary inertias is considered in the dynamic analysis, which is original in the literature. Rectangular, sine and step type of impulsive loads are applied on helices having rectangular cross-sections with various aspect ratios. The Kelvin and standard models are used for defining the linear viscoelastic material behavior; and by means of the correspondence principle (the elastic-viscoelastic analogy), the material parameters are replaced with their complex counterparts in the Laplace domain. The analysis is carried out in the Laplace domain and the results are transformed back to time space numerically by modified Durbin?s algorithm. First, the solution algorithm is verified using the existing open sources in the literature and afterwards some benchmark examples such as conical viscoelastic rods are handled.