Fabrication and characterization of highly crystalline mordenite membranes on α-alumina disks via a seeded in situ template-free hydrothermal treatment

A template-free seeded short-time in situ hydrothermal treatment was carried out in a brass autoclave to synthesize crystalline mordenite (MOR) membranes on alumina-silicate disk supports with micro-scale pores. According to XRD analysis, MOR was the only zeolitic material present in the membrane layers on the supports. SEM examination of the membranes showed three different layers of the membrane thickness: (i) support sub-layer, (ii) mix penetrated mid-layer, the MOR crystals filling the pores among the support (about 4–5 μm), and (iii) MOR top-layer (about 4–5 μm). The crystalline bonds between MOR crystals of the membrane top-layer and the crystals of the support were clearly observed within the mid-layer. The continuous top-layer of zeolitic membrane was formed by many large and well-shaped crystals. The seeding treatment significantly enhanced the formation of MOR crystals onto the surface of the supports. EDAX analysis showed a Si/Al ratio of 6.8 for the MOR layer of the membrane. Due to their hydrophilic natures, the polycrystalline MOR membranes were found to be selective for continuous dehydration of different EtOH–water mixtures through an adsorption–diffusion–desorption mechanism. Both total permeation flux and separation factor of the membrane were found to increase by increasing temperature and water concentration of feed. The continuity and high crystallinity of the membrane top-layer led to the fairly high dehydration of EtOH. It was found that there was no pinhole within the layer and the morphology of the membrane was almost defect-free.     

Characterization of Mazuj galls of Quercus infectoria tree as green corrosion and scale inhibitor for effective treatment of cooling water systems

Research on Chemical Intermediates - The corrosion and scale inhibition efficiency of Mazuj gall extract in simulated cooling water has been evaluated. Potentiodynamic polarization, electrochemical...     

In Vitro Evaluation of Zn–Norfloxacin Complex as a Potent Cytotoxic and Antibacterial Agent, Proposed Model for DNA Binding

A tetrahedral Zn(II) complex with the second generation fluoroquinolone, norfloxacin, was prepared and characterized (NOR–Zn complex, NZC). The antibacterial efficiency of the NZC was tested on two Gram-positive and four Gram-negative bacteria by minimum inhibitory concentration method. The cytotoxic potential of NZC on MDA (human breast adenocarcinoma), Caco-2 (human colon adenocarcinoma), and Hela (human cervix carcinoma) cell lines was studied. The DNA interaction property of the NZC has been investigated using UV–vis, fluorescence, Fourier transform infrared, as well as cyclic voltammetry methods. Intrinsic binding constant (K _b ), thermodynamic, and other spectroscopic and voltammetric data indicate that the NZC has more affinity for DNA than for norfloxacin and interacted with DNA via two modes: electrostatic and outside hydrogen binding. The proposed DNA binding mode supports the large enhancement in the cytotoxicity and antibacterial activity of NZC.     

Pd(0)-guanidine@MCM-41: a very effective catalyst for rapid production of bis (pyrazolyl)methanes

In this research, a rapid, green and efficient protocol for synthesis of bis (pyrazolyl)methane derivatives in the presence of Pd(0)-guanidine@MCM-41 catalysts under solvent-free conditions by the following two methods has been reported: (i) via the one-pot pseudo five-component reaction among phenylhydrazine (2 equivalents), ethyl acetoacetate (2 equivalents) and aromatic aldehydes (1 equivalent); and (ii) the one-pot pseudo three-component reaction between 3-methyl-1-phenyl-1H-pyrazol-5(4H)-one (2 equivalents) and aromatic aldehydes (1 equivalent). Some advantages of this protocol include: green conditions, extremely short times, high efficiency, proper one-pot operation, generality of method, easy work-up and recyclability, and reusability of the catalyst up to five times without significant loss in catalytic activity.     

Preparation of a dual-functionalized fumed silica nanoparticle catalysis for synthesis of azaluorenone derivatives

Research on Chemical Intermediates - A dual-functional silica-based catalyst was prepared by treating fumed silica with amino-containing silane then 1,4-butane sultone. The presence of functional...     

Palladium nanoparticles‐decorated triethanolammonium chloride ionic liquid‐modified TiO2 nanoparticles (TiO2/IL‐Pd): A highly active and recoverable catalyst for Suzuki–Miyaura cross‐coupling reaction in aqueous medium

In this work, an easily obtained procedure was successfully implemented to prepare novel palladium nanoparticles decorated on triethanolammonium chloride ionic liquid‐functionalized TiO₂ nanoparticles [TiO₂/IL‐Pd]. Different methods were carried out for characterizations of the synthesized nanocatalyst (HR‐TEM, XPS, XRD, FE‐SEM, EDX, FT‐IR and ICP). TiO₂/IL‐Pd indicated good catalytic activity for the Suzuki–Miyaura cross‐coupling reaction of arylboronic acid with different aryl halides in aqueous media at ambient temperature. The recycled catalyst was investigated with ICP to amount of Pd leaching after 6 times that had diminished slightly, Thus, was confirmed that the nanocatalyst has a good sustainability for C–C Suzuki–Miyaura coupling reaction. The catalyst can be conveniently separated by filtration of the reaction mixture and reused for 6 times without significant loss of its activity. It supplies an environmentally benign alternative path to the existing protocols for the Suzuki–Miyaura reaction.     

Evaluating nonlinear variability of mental fatigue behavioral indices during long‐term attentive task

This study investigates the behavioral indices of attention. A simple repetitive attentive task that resulted in mental fatigue was used consecutively in four trials. In the first step, reaction time and error responses were recorded to evaluate differences among trials. During the task, subjects showed different responses to stimulations. In the second part, to recognize the strategies, multiple clustering methods such as k‐means and fuzzy c‐means were performed in which behavioral indices and nonlinear features were used. In the last section, mental behavior was identified as a result of the chaotic properties of variations in reaction time. Therefore, the Lyapunov exponent of reaction times was evaluated. Results revealed that behavioral indices could distinguish attention from the occurrence of mental fatigue in trials. In addition, the three strategies used by subjects during the test protocol were assessed. Finally, variation of indices extracted from nonlinear analysis, that is, decrease in degree of chaotic behavior determined the transition from attention to mental fatigue. © 2012 Wiley Periodicals, Inc. Complexity, 2012     

The effect of porosity on the laser induced damage threshold of TiO2 and ZrO2 single layer films

Monolayer ZrO₂ and TiO₂ films were prepared on BK7 glass by physical vapor deposition (PVD) and were subsequently annealed for 1 h at 300 °C. By using the transmission spectra of two samples and the envelope method, the refractive index dispersion and extinction coefficients have been calculated. Laser induced damage threshold (LIDT) measurement shows that despite slight differences between the extinction coefficients of the two samples, the LIDT parameter of the ZrO₂ film is greater than that of the TiO₂ film. This fact leads us to consider thermal conductivity as an important parameter for interpreting the LIDT difference. According to our theoretical analysis, as a consequence of increase in the number of thermal barriers along poorer film, its thermal conductivity, and hence LIDT, decreased, which is in agreement with our experimental results. The measured porosity of the two samples shows higher porosity for TiO₂ single layer, which is in agreement with atomic force (AFM) images. The gradual and smooth damage morphology of ZrO₂ observed in optical images implies higher thermal conductivity than TiO₂.