Protic ionic liquid [TMG][Ac] as an efficient,homogeneous and recyclable catalyst for Boc protection of amines

An efficient and practical protocol for the chemoselective N-Boc protection of various structurally different aryl, aliphatic and heterocyclic amines was carried out with (Boc)₂O using protic 1, 1, 3, 3-tetra-methylguanidinium acetate (10 mol%) as recyclable catalyst under solvent free condition at ambient temperature. No competitive side reactions (isocyanate, urea and N, N-di-Boc) were observed. α-Amino alcohols afforded the N-Boc-derivative without oxazolidinone formation.     

Cobalt promoted Ni/MgAl2O4 catalyst in lean methane catalytic oxidation

In the present research, magnesium aluminate spinel was prepared as catalyst support using a novel, facile, and efficient mechanochemical method. The Co-promoted catalysts with 20 wt.% of Ni were fabricated using an impregnation route and the samples were analyzed by the X-ray diffraction (XRD), N₂ adsorption/desorption (BET), temperature-programmed reduction and desorption (H₂-TPR and O₂-TPD), and field emission scanning electron microscopy (FESEM) tests. The results confirmed that all samples have a mesoporous structure with a high specific surface area and the presence of cobalt caused complete CH₄ oxidation at low temperatures, and no side reactions were observed. The results indicated that the 3%Co-20%Ni/MgAl₂O₄ catalyst was the optimal sample among the prepared catalysts, owing to the improvement of reduction features and oxygen mobility. The 50 and 90% of methane conversion was obtained at 530 and 600 °C, respectively. Also, the influence of calcination temperature, GHSV, and feed ratio was determined on the catalytic activity. The obtained outcomes revealed that the calcination temperature has a significant effect on the textural properties and catalytic efficiency. The sample calcined at 700 °C showed the weakest performance, which was related to the sintering of particles at high temperatures. The catalytic stability showed that the 3%Co-20%Ni/MgAl₂O₄ has acceptable stability during 600 min time of reaction.

Graphical abstract

     

Preparation,characterization, and use of poly(vinylpyrrolidonium) hydrogen phosphate ([PVP-H]H2PO4) as a new heterogeneous catalyst for efficient synthesis of 2-amino-tetrahydro-4H-pyrans

Research on Chemical Intermediates - A novel Brønsted solid acid named poly(vinylpyrrolidonium) hydrogen phosphate ([PVP-H]H2PO4) has been prepared by using H3PO4 and poly(vinylpyrrolidone) as...     

Application of the localized surface plasmon resonance of gold nanoparticles for the determination of 1,1-dimethylhydrazine in water: Toward green analytical chemistry

Localized surface plasmon resonance (LSPR) is an optical phenomena generated by light when it interacts with conductive nanoparticles that are smaller than the incident wavelength. In this work, we proposed a simple, fast, and green method for spectrophotometric determination of unsymmetrical 1,1-dimethylhydrazine (UDMH) based on LSPR property of gold nanoparticles (AuNPs). An LSPR band is produced via reduction of Au³⁺ ions in solution by UDMH as active reducing agent in the presence of cetyltrimethylammonium chloride as a capping agent. Some important parameters in the formation of LSPR including Au(III) concentration, pH, concentration of stabilizer, and reaction time were studied and optimized. Under optimum conditions, the LSPR intensity displays linear response with the increasing UDMH concentration in the range from 0.5–10 μg/mL at 550 nm with a detection limit of 0.2 μg/mL. Also, the relative standard deviation for ten replicate determination of 5.0 μg/mL of UDMH was 3%. Usage of AuNPs as new nontoxic reagent instead of hazardous reagents in the spectrophotometric determination of UDMH is a step toward green analytical chemistry. The proposed method was successfully applied for determination of UDMH in water and wastewater samples.     

Efficacy of incorporating PCMs into the commercial wall on the energy-saving annual thermal analysis

Journal of Thermal Analysis and Calorimetry - In this study, the efficacy of incorporating phase change material (PCM) into the building walls on the annual heat transfer reduction is examined....     

Develop dissipative particle dynamics method to study the fluid flow and heat transfer of Ar and O2 flows in the micro- and nanochannels with precise atomic arrangement versus molecular dynamics approach

Fluid atomic behavior is an important factor for industrial applications. Computer simulations based on simple models predict Poiseuille flow for these atomic structures with the presence of external force. In this work, we describe the dynamical properties of Ar and O₂ flows with precise atomic arrangement via dissipative particle dynamics (DPD) and molecular dynamics (MD) simulation approaches. In these methods, each model is represented by using Large-scale Atomic/Molecular Massively Parallel Simulator package. Simulation results show that maximum rate for velocity of Ar flow in platinum and copper microchannels is 0.100 (unit less)/0.091 Å ps^?1 and 0.121 (unit less)/0.105 Å ps^?1 by using DPD/MD approach. This atomic parameter changes to 0.111 (unit less)/0.102 Å ps^?1 and 0.125 (unit less)/0.108 Å ps^?1 for O₂ fluid with mentioned approaches. By decreasing the microchannel size, the maximum rate of velocity reaches to 0.101 (unit less)/0.099 Å ps^?1 and maximum temperature rate decreases to 485 (unit less)/440 K with DPD/MD approaches. These calculated parameters can be used in industrial application designing for some processes such as heat transfer in structures. It was seen that the developed DPD approach was able to simulate the fluid flow and heat transfer of various types of fluids at micro- and nanoscales with suitable accuracy versus MD.

     

Sodium Phytate-Incorporated Gelatin-Silicate Nanoplatelet Composites for Enhanced Cohesion and Hemostatic Function of Shear-Thinning Biomaterials

Shear-thinning biomaterials (STBs) based on gelatin-silicate nanoplatelets (SNs) are emerging as an alternative to conventional coiling and clipping techniques in the treatment of vascular anomalies. Improvements in the cohesion of STB hydrogels pave the way toward their translational application in minimally invasive therapies such as endovascular embolization repair. In the present study, sodium phytate (Phyt) additives are used to tune the electrostatic network of SNs-gelatin STBs, thereby promoting their mechanical integrity and facilitating injectability through standard catheters. We show that an optimized amount of Phyt enhances storage modulus by approximately one order of magnitude and reduces injection force by ≈58% without compromising biocompatibility and hydrogel wet stability. The Phyt additives are found to decrease the immune responses induced by SNs. In vitro embolization experiments suggest a significantly lower rate of failure in Phyt-incorporated STBs than in control groups. Furthermore, the addition of Phyt leads to accelerated blood coagulation (reduces clotting time by ≈45% compared to controls) due to the contributions of negatively charged phosphate groups, which aid in the prolonged durability of STB in coagulopathic patients. Therefore, the proposed approach is an effective method for the design of robust and injectable STBs for minimally invasive treatment of vascular malformations.     

The Chromatic Index of a Graph Whose Core is a Cycle of Order at Most 13

Let G be a graph. The core of G, denoted by G _Δ, is the subgraph of G induced by the vertices of degree Δ(G), where Δ(G) denotes the maximum degree of G. A k -edge coloring of G is a function f : E(G) → L such that |L| = k and f (e ₁) ≠ f (e ₂) for all two adjacent edges e ₁ and e ₂ of G. The chromatic index of G, denoted by χ′(G), is the minimum number k for which G has a k-edge coloring. A graph G is said to be Class 1 if χ′(G) = Δ(G) and Class 2 if χ′(G) = Δ(G) + 1. In this paper it is shown that every connected graph G of even order whose core is a cycle of order at most 13 is Class 1.     

The Inclusion Ideal Graph of Rings

Let R be a ring with unity. The inclusion ideal graph of a ring R, denoted by In(R), is a graph whose vertices are all nontrivial left ideals of R and two distinct left ideals I and J are adjacent if and only if I ? J or J ? I. In this paper, we show that In(R) is not connected if and only if R ? M ₂(D) or D ₁ × D ₂, for some division rings, D, D ₁ and D ₂. Moreover, we prove that if In(R) is connected, then diam(In(R)) ≤3. It is shown that if In(R) is a tree, then In(R) is a caterpillar with diam(In(R)) ≤3. Also, we prove that the girth of In(R) belongs to the set {3, 6, ∞}. Finally, we determine the clique number and the chromatic number of the inclusion ideal graph for some classes of rings.     

Modelling and control of flexible joint robot based on Takagi–Sugeno fuzzy approach and its stability analysis via sum of squares

This article proposes a Takagi–Sugeno (T-S) fuzzy model of single-link rotary flexible joint robot. The proposed control method is based on parallel distributed control. The parameters of T-S controller are improved by distributed population genetic algorithm (GA) with chaos GA. Using Hermite–Biehler theorem in distributed population, GA is made to have a fast convergence. Dividing search space into several sub-spaces causes a better response, and chaos disturbance helps the whole algorithm to reach a best answer. The stability of the controller is analysed via the sum of squares programming, and finally, it is implemented on the plant.