Antibacterial Broad-Spectrum Dendritic/Gellan Gum Hybrid Hydrogels with Rapid Shape-Forming and Self-Healing for Wound Healing Application

Treating wound infections is a difficult task ever since pathogenic bacteria started to develop resistance to common antibiotics. The present study develops hybrid hydrogels based on the formation of a polyelectrolyte complex between the anionic charges of dopamine-functionalized Gellan Gum (GG-DA) and the cationic moieties of the TMP-G2-alanine dendrimer. The hydrogels thus obtained can be doubly crosslinked with CaCl₂, obtaining solid hydrogels. Or, by oxidizing dopamine to GG-DA, possibly causing further interactions such as Schiff Base and Michael addition to take place, hydrogels called injectables can be obtained. The latter have shear-thinning and self-healing properties (efficiency up to 100%). Human dermal fibroblasts (HDF), human epidermal keratinocytes (HaCaT), and mouse monocyte cells (RAW 264.7), after incubation with hydrogels, in most cases show cell viability up to 100%. Hydrogels exhibit adhesive behavior on various substrates, including porcine skin. At the same time, the dendrimer serves to crosslink the hydrogels and endows them with excellent broad-spectrum microbial eradication activity within four hours, evaluated using Staphylococcus aureus 2569 and Escherichia coli 178. Using the same GG-DA/TMP-G2-alanine ratios hybrid hydrogels with tunable properties and potential for wound dressing applications can be produced.     

Performance enhancement of Absolute Polar Duty Cycle Division Multiplexing with Dual-Drive Mach-Zehnder-Modulator in 40 Gbit/s optical fiber communication systems

We modeled and analyzed a method to improve receiver sensitivity of the Absolute Polar Duty Cycle Division Multiplexing (AP-DCDM) transmission system by using Dual-Drive Mach-Zehnder-Modulator (DD-MZM). It is found that by optimizing the bias voltage in DD-MZM, the sensitivity of the AP-DCDM can be improved. The optimizations lead towards the larger eye opening. As opposed to the previous work, in terms of receiver sensitivity and dispersion tolerance, similar performance for all channels was achieved. In comparison to the previously reported AP-DCDM system, this work resulted in almost 3.6 dB improvement of the receiver sensitivity, came together with acceptable chromatic dispersion tolerance.     

Improving the characteristics of the modulation response for fiber Bragg grating Fabry–Perot lasers by optimizing model parameters

A unified and comprehensive study on the small-signal intensity and frequency modulation characteristics of a fiber Bragg grating Fabry–Perot (FBG–FP) laser are numerically investigated. The effect of injection current, temperature, external optical feedback (OFB), nonlinear gain compression factor, fiber grating (FG) parameters and spontaneous emission factor on modulation response characteristics are presented. The rate equations of the laser model are presented in the form that the effect of temperature (T) and external optical feedback (OFB) are included. The temperature dependence (TD) of laser response is calculated according to the TD of laser cavity parameters instead of directly using the well-known Parkove equation. It is shown that the optimum external fiber length (L_ext) is 3.1 cm and the optimum range of working temperature for FGFP laser is within ±2 °C from the FBG reference temperature (T_o). Also, the antireflection (AR) coating reflectivity and the linewidth enhancement factor have no significant effect on the modulation spectra. It is also show that modulation response is extremely sensitive to the OFB level, high injection current and gain compression factor. The study indicates clearly that good dynamic characteristic can be obtained by system parameters optimization.     

Comment on: “Theoretical calculation of turn-on delay time of VCSEL and effect of carriers recombination” [Opt. Laser Technol. 39 (2007) 997–1001]

Zhang et al. [Opt. Laser Technol. 39 (2007) 997–1001], through theoretical calculation, have shown that the turn-on time delay can be reduced by increasing any of the non-radiative (A_nr), radiative (B), and/or Auger recombination (C) coefficients at a constant injection current over threshold current. Here, we explain that the results presented by that paper are incorrect and the turn-on time delay increases by increasing any of the carrier recombination rate coefficients.     

Stable double spacing multiwavelength Brillouin-Erbium doped fiber laser based on highly nonlinear fiber

A double frequency spaced multiwavelength Brillouin-Erbium doped fiber laser (BEDFL) with figure-of-eight cavity have been successfully developed and tested. Double frequency spacing is achieved by using a piece of 2 km of highly nonlinear fiber (HNLF) as a gain medium. Figure-of-eight configuration removes the odd order Stokes signals via a four-port circulator. Fifteen Stokes channels are simultaneously generated with a spacing of 0.154 nm that is around 20 GHz, when the Brillouin pump and 980 nm pump powers are fixed at the optimized values of 6 dBm and 40 mW, respectively. Fourteen anti stoke channels are also obtained, which are generated through four wave mixing (FWM) process in the laser cavity. The output is smooth triangular comb. The BEFL can also be tuned from 1526.5 to 1567.5 nm.     

Time delay reduction in low power ultrashort pulse and pulse stream propagation with overlapping soliton pair

Propagation of temporal 50 femtosecond pulse and pulse stream, which is realized by substituting each input pulse with reduced-order overlapping soliton pair, is investigated through short standard single-mode fiber. For the pulse stream the initial inter-pulse delay is selected to be 227 fs and the pulses are to be perturbed to avoid collision with the neighboring pulses. This method reduces the pulse time delay and properly retains the amplitude despite tradeoff between these two. This is a significant improvement in the low power femtosecond pulse and pulse stream propagation.     

A stabilized tunable dual wavelength erbium-doped fiber laser with equal output power

Tunable dual-wavelength erbium-doped fiber laser with good stability is experimentally demonstrated. Output power of as high as +5.26 dBm is obtained in dual ring configuration. Both laser output can be tuned to as closed as 0.8 nm spacing between each other, with tuning range of 31.33 nm. The stability of both outputs was tested that results in less than ±0.8 dB and ±0.01 nm in power and wavelength fluctuation, respectively.     

Numerical Simulation of Two Phase Turbulent Flow of Nanofluids in Confined Slot Impinging Jet

In this article, a numerical investigation is performed on flow and heat transfer of confined impinging slot jet, with a mixture of water and Al₂O₃ nanoparticles as the working fluid. Two-dimensional turbulent flow is considered and a constant temperature is applied on the impingement surface. The k ? ω turbulence model is used for the turbulence computations. Two-phase mixture model is implemented to study such a flow field. The governing equations are solved using the finite volume method. In order to consider the effect of obstacle angle on temperature fields in the channel, the numerical simulations were performed for different obstacle angles of 0° ? 60°. Also different geometrical parameters, volume fractions and Reynolds numbers have been considered to study the behavior of the system in terms of stagnation point, average and local Nusselt number and stream function contours. The results showed that the intensity and size of the vortex structures depend on jet- impingement surface distance ratio (H/W) and volume fraction. The maximum Nusselt number occurs at the stagnation point with the highest values at about H/W = 1. Increasing obstacle angle, from 15° to 60°, enhances the heat transfer rate. It was also revealed that the minimum value of average Nusselt number occurs in higher H/W ratios with decreasing the channel length.     

CFD studies on natural convection heat transfer of Al<Subscript>2</Subscript>O<Subscript>3</Subscript>-water nanofluids

This work is focused on numerical simulations of natural convection heat transfer in Al₂O₃-water nanofluids using computational fluid dynamics approach. Fluent v6.3 is used to simulate water based nanofluid considering it as a single phase. Thermo-physical properties of the nanofluids are considered in terms of volume fraction and size of nanoparticles, size of base fluid molecule and temperature. The numerical values of effective thermal conductivity have also been compared with the experimental values available in the literature. The numerical result simulated shows decrease in heat transfer with increase in particle volume fraction. Computed result shows similar trend in increase of Nusselt number with Relayigh number as depicted by experimental results. Streamlines and temperature profiles are plotted to demonstrate the effect.     

A curcumin derivative, 2,6-bis(2,5-dimethoxybenzylidene)-cyclohexanone (BDMC33) attenuates prostaglandin E2 synthesis via selective suppression of cyclooxygenase-2 in IFN-γ/LPS-stimulated macrophages

Our preliminary screening had shown that the curcumin derivative [2,6-bis(2,5-dimethoxybenzylidene)cyclohexanone] or BDMC33 exhibited improved anti-inflammatory activity by inhibiting nitric oxide synthesis in activated macrophage cells. In this study, we further investigated the anti-inflammatory properties of BDMC33 on PGE(2 )synthesis and cyclooxygenase (COX) expression in IFN-γ/LPS-stimulated macrophages. We found that BDMC33 significantly inhibited PGE(2) synthesis in a concentration-dependent manner albeit at a low inhibition level with an IC(50) value of 47.33 ± 1.00 μM. Interestingly, the PGE(2) inhibitory activity of BDMC33 is not attributed to inhibition of the COX enzyme activities, but rather BDMC33 selectively down-regulated the expression of COX-2. In addition, BDMC33 modulates the COX expression by sustaining the constitutively COX-1 expression in IFN-γ/LPS-treated macrophage cells. Collectively, the experimental data suggest an immunodulatory action of BDMC33 on PGE(2) synthesis and COX expression, making it a possible treatment for inflammatory disorders with minimal gastrointestinal-related side effects.