Structural determination by atmospheric pressure photoionization tandem mass spectrometry of some compounds isolated from the SARA fractions obtained from bitumen

We have identified compounds obtained from the SARA fractions of bitumen by using atmospheric pressure photoionization mass spectrometry and low‐energy collision tandem mass spectrometric analyses with a QqToF‐MS/MS hybrid instrument. The identified compounds were isolated from the maltene saturated oil and the aromatic fractions of the SARA components of a bitumen. The QqToF instrument had sufficient mass resolution to provide accurate molecular weight information and to enhance the tandem mass spectrometry results. The APPI‐QqToF‐MS analysis of the separated compounds showed a series of protonated molecules [M + H]⁺ and molecular ions [M]^+? of the same mass but having different chemical structures, in the maltene saturated oil and the aromatic SARA fractions. These isobaric ions were a molecular ion [M₂]^+? at m/z 418.2787 and a protonated molecule [M₅ + H]⁺ at m/z 287.1625 in the saturated oil fraction, and molecular ions [M₆]^+? at m/z 418.1584 and [M₇]^+? at m/z 287.1285 in the aromatic fraction. The identification of this series of chemical compounds was achieved by performing CID‐MS/MS analyses of the molecular ions [M]^+? ([M₁]^+? at m/z 446. 2980, [M₂]^+? at m/z 418.2787, [M₃]^+? at m/z 360.3350 and [M₄]^+? at m/z 346.2095) in the saturated oil fraction and of the [M₅ + H]⁺ ion at m/z 287.1625 also in the saturated oil fraction. The observed CID‐MS/MS fragmentation differences were explained by proposed different breakdown processes of the precursor ions. The presented tandem mass spectrometric study shows the capability of MS/MS experiments to differentiate between different classes of chemical compounds of the SARA components of bitumen and to explain the reasons for the observed mass spectrometric differences. However, greater mass resolution than that provided by the QqToF‐MS/MS instrument would be required for the analysis of the asphaltene fraction of bitumen. Copyright © 2011 John Wiley & Sons, Ltd.     

On the response of LR-115 plastic track detector to 10 20 Ne-ion

The track etch rates of ₁₀ ²⁰ Ne-ion in cellulose nitrate (LR-115) have been measured for different temperatures and the activation energy is determined. The experimental results show that both the track etch rate and the normalized track etch rate depend on the energy loss as well as on etching temperature. The maximum etched track length of ₁₀ ²⁰ Ne-ion agrees with the theoretically computed range. The experimental results show that there is no sharp threshold, at least in CN(LR-115).     

Performance of hydrodynamic journal bearing under the combined influence of textured surface and journal misalignment: A numerical survey

A wisely chosen geometry of micro textures with the favorable relative motion of lubricated surfaces in contacts can enhance tribological characteristics. In this paper, a computational investigation related to the combined influence of bearing surface texturing and journal misalignment on the performances of hydrodynamic journal bearings is reported. To this end, a numerical analysis is performed to test three texture shapes: square “SQ”, cylindrical “CY”, and triangular “TR”, and shaft misalignment variation in angle and degree. The Reynolds equation of a thin viscous film is solved using a finite differences scheme and a mass conservation algorithm (JFO boundary conditions), taking into account the presence of textures on both full film and cavitation regions. Preliminary results are compared with benchmark data and are consistent with a positive enhancement in misaligned bearing performances (load carrying capacity and friction). The results suggest that the micro-step bearing mechanism is a key parameter, where the micro-pressure recovery action present in dimples located at the second angular part of the bearing (from 180° to 360°) can compensate for the loss on performances caused by shaft misalignment, while the micro-pressure drop effect at the full film region causes poor performances. Considering the right arrangement of textures on the contact surface, their contours geometries can have a significant impact on the performance of misaligned journal bearings, particularly at high eccentricity ratios, high misalignment degrees and when the misalignment angle α approaches to $0\mathrm{°}$ or $180\mathrm{°}$.     

Preyssler heteropolyacid supported on silica coated NiFe2O4 nanoparticles for the catalytic synthesis of bis(dihydropyrimidinone)benzene and 3,4-dihydropyrimidin-2(1H)-ones

A novel magnetic acidic catalyst comprising Preyssler (H14[NaP5W30O110]) heteropoly acid support‐ed on silica coated nickel ferrite nanoparticles (NiFe2O4@SiO2) was prepared. The catalyst was character...     

Synthesis of pyrano[2,3-<Emphasis Type="Italic">c</Emphasis>]pyrazoles by ionic liquids under green and eco-safe conditions

Optimization of a green approach to the synthesis of pyrano[2,3-c]pyrazoles based on the one-pot, four-component condensation via a domino Knoevenagel/Michael/cyclization sequence was investigated. This method involved the evaluation of the activity of several ionic liquids (ILs) in various solvents. This one-pot, four-component reaction revealed simplicity, higher yield and lower toxicity advantages over a corresponding three-component method. The effect of reaction parameters including the type and amount of catalyst, type of solvent, reaction temperature and time were studied with respect to yield of pyrano[2,3-c]pyrazoles. Catalyst recyclability and time-saving aspects of the reaction suggest that this method presents real alternatives over conventional reaction protocols.     

Electropolymerization of Mefenamic Acid on Copper and Copper Based Alloy as a New Strategy to Control the Release of Copper Ions from Copper Containing Devices

Poly-2-(2,3-dimethylanilino) benzoic acid (PMF) coatings on copper and brass alloy were synthesized by electrochemical oxidation of 2-(2,3-dimethylanilino) benzoic acid in the presence of oxalic acid as the reaction medium. Electrodeposition was carried out using the cyclic voltammetry technique using a silver/silver-chloride standard electrode, with a scan rate of 600 mV min^–1. Smooth and well adhered PMF coatings were electrosynthesized during sequential scanning of the potential in the range–500 mV to 1400 mV on copper and brass alloy. The electrodeposited coatings were characterized by recording the oxidation peaks at 122 mV for Cu and–0.7 mV for brass, in cyclic voltammetry and using scanning electron microscopy (SEM). Corrosion inhibition efficiency of coated copper and brass alloy was investigated by electrochemical impedance spectroscopy (EIS) and potentiodynamic polarization techniques. The impedance results showed that the inhibition efficiency of coated copper is 89% and for coated brass 79.4% compared to the uncoated copper and brass in 0.1 M H₂SO₄.

     

Chromatographic analysis of ledipasvir and sofosbuvir: New treatment for chronic hepatitis C infection with application to human plasma

Sofosbuvir (SOF) and ledipasvir (LED) are recently approved and coformulated as directly acting antiviral agents used for treatment of hepatitis C virus (HCV). A reversed phase high performance liquid chromatography - diode array detector (RP-HPLC/DAD) method was developed and validated for the first time for the analysis of newly formulated anti-HCV combination, in pure form, pharmaceutical formulation and in human plasma. In the developed method, separation was performed on Zorbax® Eclipse C18 column using a gradient mixture of acetonitrile–water as a mobile phase and scanning was performed at 260?nm (for SOF) and 330?nm (for LED). The two drugs were completely separated from each other and from plasma, where plasma peak appeared at 2.76?±?0.05?min, SOF at 4.25?±?0.05, and LED at 7.35?±?0.05. The developed method showed high sensitivity, the drugs showed linearity in the range of 1–45?µg/mL for both pure form and spiked human plasma. Three freeze–thaw cycles were performed separately at two different temperatures, ?8 and ?20°C. No significant loss of the studied drugs were observed during repeated thawing and freezing. Validation parameters such as accuracy, precision, robustness, and ruggedness were tested in compliance with USP recommendations, where acceptable results were obtained. Applying to pharmaceutical formulation showed no interference from tablet excipients.     

A new lot sizing and scheduling heuristic for multi-site biopharmaceutical production

Biopharmaceutical manufacturing requires high investments and long-term production planning. For large biopharmaceutical companies, planning typically involves multiple products and several production facilities. Production is usually done in batches with a substantial set-up cost and time for switching between products. The goal is to satisfy demand while minimising manufacturing, set-up and inventory costs. The resulting production planning problem is thus a variant of the capacitated lot-sizing and scheduling problem, and a complex combinatorial optimisation problem. Inspired by genetic algorithm approaches to job shop scheduling, this paper proposes a tailored construction heuristic that schedules demands of multiple products sequentially across several facilities to build a multi-year production plan (solution). The sequence in which the construction heuristic schedules the different demands is optimised by a genetic algorithm. We demonstrate the effectiveness of the approach on a biopharmaceutical lot sizing problem and compare it with a mathematical programming model from the literature. We show that the genetic algorithm can outperform the mathematical programming model for certain scenarios because the discretisation of time in mathematical programming artificially restricts the solution space.     

Recent progresses on solution-processed silver nanowire based transparent conducting electrodes for organic solar cells

Organic photovoltaics (OPVs) are considered as a future alternative for conventional silicon based solar cells, owing to their low cost, ease of production and high-throughput. The transparent conducting electrode (TCE) is a fundamental component of OPVs. Traditionally, indium tin oxide (ITO) has been mainly utilized as a TCE in OPV applications due to its relatively high transparency and low sheet resistance. However, increasing demand for the optoelectronic devices has led to large fluctuations in ITO prices in the past decade and ITO is known to account more than 50% of the total cost of OPV devices. Thus, it is believed that development of solution-processable alternative materials is of great importance in reducing the cost of OPVs. Numerous materials, including silver nanowires, carbon nanotubes, graphene and conducting polymers, have been offered as replacements for ITO. This article reviews recent progress on fabrication of TCE via solution based coating techniques of silver nanowires (Ag NWs). In addition, performance of the Ag NWs based TCE in OPVs is summarized. Finally, we explore the future outlook for Ag NWs based TCE at the end of the review.