19F NMR studies of the native and denatured states of green fluorescent protein

Biosynthetic preparation and (19)F NMR experiments on uniformly 3-fluorotyrosine-labeled green fluorescent protein (GFP) are described. The (19)F NMR signals of all 10 fluorotyrosines are resolved in the protein spectrum with signals spread over 10 ppm. Each tyrosine in GFP was mutated in turn to phenylalanine. The spectra of the Tyr --> Phe mutants, in conjunction with relaxation data and results from (19)F photo-CIDNP (chemically induced dynamic nuclear polarization) experiments, yielded a full (19)F NMR assignment. Two (19)F-Tyr residues (Y92 and Y143) were found to yield pairs of signals originating from ring-flip conformers; these two residues must therefore be immobilized in the native structure and have (19)F nuclei in two magnetically distinct positions depending on the orientation of the aromatic ring. Photo-CIDNP experiments were undertaken to probe further the structure of the native and denatured states. The observed NMR signal enhancements were found to be consistent with calculations of the HOMO (highest occupied molecular orbital) accessibilities of the tyrosine residues. The photo-CIDNP spectrum of native GFP shows four peaks corresponding to the four tyrosine residues that have solvent-exposed HOMOs. In contrast, the photo-CIDNP spectra of various denatured states of GFP show only two peaks corresponding to the (19)F-labeled tyrosine side chains and the (19)F-labeled Y66 of the chromophore. These data suggest that the pH-denatured and GdnDCl-denatured states are similar in terms of the chemical environments of the tyrosine residues. Further analysis of the sign and amplitude of the photo-CIDNP effect, however, provided strong evidence that the denatured state at pH 2.9 has significantly different properties and appears to be heterogeneous, containing subensembles with significantly different rotational correlation times.     

Synthesis of tapioca cellulose-based poly(hydroxamic acid) ligand for heavy metals removal from water

A graft copolymerization was performed using free radical initiating process to prepare the poly(methyl acrylate) grafted copolymer from the tapioca cellulose. The desired material is poly(hydroxamic acid) ligand, which is synthesized from poly(methyl acrylate) grafted cellulose using hydroximation reaction. The tapioca cellulose, grafted cellulose and poly(hydroxamic acid) ligand were characterized by Infrared Spectroscopy and Field Emission Scanning Electron Microscope. The adsorption capacity with copper was found to be good, 210 mg g^?1 with a faster adsorption rate (t_1/2 = 10.5 min). The adsorption capacities for other heavy metal ions were also found to be strong such as Fe³⁺, Cr³⁺, Co³⁺ and Ni²⁺ were 191, 182, 202 and 173 mg g^?1, respectively at pH 6. To predict the adsorption behavior, the heavy metal ions sorption onto ligand were well-fitted with the Langmuir isotherm model (R² > 0.99), which suggest that the cellulose-based adsorbent i.e., poly(hydroxamic acid) ligand surface is homogenous and monolayer. The reusability was checked by the sorption/desorption process for six cycles and the sorption and extraction efficiency in each cycle was determined. This new adsorbent can be reused in many cycles without any significant loss in its original removal performances.     

“In situ” extraction of essential oils by use of Dean–Stark glassware and a Vigreux column inside a microwave oven: a procedure for teaching green analytical chemistry

One of the principal objectives of sustainable and green processing development remains the dissemination and teaching of green chemistry in colleges, high schools, and academic laboratories. This paper describes simple glassware that illustrates the phenomenon of extraction in a conventional microwave oven as energy source and a process for green analytical chemistry. Simple glassware comprising a Dean-Stark apparatus (for extraction of aromatic plant material and recovery of essential oils and distilled water) and a Vigreux column (as an air-cooled condenser inside the microwave oven) was designed as an in-situ extraction vessel inside a microwave oven. The efficiency of this experiment was validated for extraction of essential oils from 30 g fresh orange peel, a by-product in the production of orange juice. Every laboratory throughout the world can use this equipment. The microwave power is 100 W and the irradiation time 15 min. The method is performed at atmospheric pressure without added solvent or water and furnishes essential oils similar to those obtained by conventional hydro or steam distillation. By use of GC-MS, 22 compounds in orange peel were separated and identified; the main compounds were limonene (72.1%), β-pinene (8.4%), and γ-terpinene (6.9%). This procedure is appropriate for the teaching laboratory, does not require any special microwave equipment, and enables the students to learn the skills of extraction, and chromatographic and spectroscopic analysis. They are also exposed to a dramatic visual example of rapid, sustainable, and green extraction of an essential oil, and are introduced to successful sustainable and green analytical chemistry.     

Inside back cover: highly stereoselective metal-free oxyaminations using chiral hypervalent iodine reagents (angew. Chem. Int. Ed. 14/2012)

About 30?% of the world's iodine production comes from the Chiba area in Japan, shown in the background of the picture (Map data (?) 2012 ZENRIN Imagery (?) 2012 TerraMetrics). Enantiomerically pure hypervalent iodine compounds are the key for metal-free, highly stereoselective oxyaminations of alkenes. In their Communication on page?3462?ff., T. Wirth and U. Farid report the use of the reaction for the facile synthesis of 2-arylprolinols.     

Highly stereoselective metal-free oxyaminations using chiral hypervalent iodine reagents

The ring and I: Hypervalent iodine compounds avoid the issues of toxicity or complicated ligands of many transition-metal-based systems. A highly enantioselective oxyamination of alkenes with N-sulfonyl ureas employing chiral, lactic acid-based hypervalent iodine reagents gives a facile synthesis of enantiomerically pure 2-arylproline derivatives for the first time.     

Optical properties of nanostructure boron doped NiO thin films

Boron doped NiO films were prepared by sol–gel method. The effects of B content on the morphological and optical properties of NiO films were studied with atomic force microscopy, and optical characterization method. The average transmittance at the visible region is reached to 75 % for lower doped films (0.1 and 0.2 % B), whereas, the recorded average value of transmittance was about 62 % for doped film with 1 % B throughout the region. The optical energy gap value for pure NiO film was found to be 3.73 eV. These values were affected by B doping with non-monotonic variation and reached to 3.64 eV for 0.1 % B doped NiO. Also, the refractive index dispersion and dielectric constants of the NiO films were studied throughout the investigated range of wavelengths. The obtained results indicate that the optical parameters of the NiO film are controlled with boron doping.     

Curves in the Minkowski plane and their contact with pseudo-circles

We study the caustic, evolute, Minkowski symmetry set and parallels of a smooth and regular curve in the Minkowski plane.     

Bimolecular electron transfers that deviate from the Sandros-Boltzmann dependence on free energy: steric effect

As we reported recently, endergonic to mildly exergonic electron transfer between neutral aromatics (benzenes and biphenyls) and their radical cations in acetonitrile follows a Sandros-Boltzmann (SB) dependency on the reaction free energy (ΔG); i.e., the rate constant is proportional to 1/[1 + exp(ΔG/RT)]. We now report deviations from this dependency when one reactant is sterically crowded: 1,4-di-tert-butylbenzene (C1), 1,3,5-tri-tert-butylbenzene (C2), or hexaethylbenzene (C3). Obvious deviation from SB behavior is observed with C1. Stronger deviation is observed with the more crowded C2 and C3, where steric hindrance increases the interplanar separation at contact by ~1 ?, significantly decreasing the π orbital overlap. Consequently, electron transfer (k(et)) within the contact pair becomes slower than diffusional separation (k(-d)), causing deviation from the SB dependency, especially near ΔG = 0. Fitting the data to a standard electron-transfer theory gives small matrix elements (~5-7 meV) and reasonable reorganization energies. A small systematic difference between reactions of C3 with benzenes vs biphenyls is rationalized in terms of small differences in the electron-transfer parameters that are consistent with previous data. The influence of solvent viscosity on the competition between k(et) and k(-d) was investigated by comparing reactions in acetonitrile and propylene carbonate.     

Development and evaluation of a monolithic floating drug delivery system for acyclovir

Acyclovir (ACV), a model drug for this study, is one of the most effective drugs against viruses of the herpes group. Absorption of orally administered ACV is variable and incomplete, with a bioavailability of ca. 15-30%. The drug is absorbed in the duodenum after oral administration and hence, preparation of a floating drug delivery system (FDDS) for ACV may increase oral absorption of the drug. ACV matrix tablets (200?mg) containing an effervescent base (sodium bicarbonate and citric acid) and a binary combination of hydroxypropyl methylcellulose (HPMC) K4M with carbopol or sodium carboxymethyl cellulose (Na CMC) or polyvinylpyrrolidone (PVP) and/or sodium alginate were prepared by the direct compression method. The tablets were evaluated for physicochemical properties and in vitro floating ability (floating lag-time and duration), bioadhesiveness and drug release. The drug release studies were carried out in 0.1?N HCl (pH 1.2) at 37±0.5°C. At appropriate time intervals, samples were withdrawn and assayed spectrophotometrically at λ(max)=259?nm. The floating test showed tablets containing 15% effervescent base had a floating lag time of 10-30?s and a duration of floating time of 24?h. The formulations containing HPMC-PVP, HPMC-Na CMC, HPMC-carbopol, and HPMC-sodium alginate released about 60-90% of their drug content during a 12-h period. Increasing carbopol caused slower drug release. We concluded that the proposed tablets with 15% effervescent base, 20-30% HPMC, 30% Na CMC (and/or 20% PVP or 20% sodium alginate) showed good floating and drug release properties in vitro, and should be considered as FDDS for ACV.