Influence of diazonium-induced surface grafting on PES NF membrane fouling reduction in algal-rich water treatment

The algae bloom phenomenon incurs a major challenge to conventional drinking water treatment processes due to the discharges of a large amount of intracellular pollutant and odor compounds in the water sources. Membrane processes have been considered as promising technologies to treatment of algal-rich water due to complete algal cell rejection however, its application has been limited by membrane fouling. In this work, the high-performance loose antifouling PES NF membranes were fabricated using diazonium-induced grafting and applied for treating real algal effluent. The modified membranes exhibited complete algal dye removal and turbidity removal throughout the long-term filtration. Also, the coupling and radically modified membranes can be able to removed COD by up to 90% and 88%, respectively, while a removal efficiency of 24% was observed for bare membrane. It is worth noting that, a relative smooth behavior in permeate flux by loose modified membranes during prolonged algal dye filtration, demonstrating exceptional anti-fouling property of membranes. In addition, the fouled modified membranes were effectively recovered by water flushing. Both loose modified membranes exhibited excellent resistance in the strongly acidic environment. These high performance antifouling NF membranes affords an innovative methodology toward the treatment of algal-rich water.     

Highly stable electrochemical oxidation of phenolic compounds at carbon ionic liquid electrode

A carbon ionic liquid electrode (CILE) was used for the investigation of the electrochemical oxidation of phenolic compounds in acidic media using cyclic voltammetry, chronoamperometry and square wave voltammetry techniques. The results indicate that, contrary to many other electrodes, the oxidation of phenolic compounds on CILE is highly stable and does not result in electrode fouling. Cyclic voltammetry showed that phenolic compounds such as phenol, 2,4-dichlorophenol and catechol were oxidized at CILE and remained electroactive after multiple cycles and at high concentrations of phenol. The cyclic voltammetric response of the CILE is very stable with more than 99% of the initial activity remaining after 20 s of stirring of a 0.5 mM solution of phenol.     

On the adsorption and formation of Pt dimers on the CeO2(111) surface

The direct adsorption of Pt(2) dimers on CeO(2)(111) and their formation from isolated adsorbed Pt atoms have been studied using periodic slab model calculations based on density functional theory and including the so-called on-site Hubbard parameter (GGA + U). In the most stable configuration Pt(2) is found to be almost parallel to the surface; the electronic ground state is closed shell and there is no evidence of charge transfer towards or from the surface. The formation of Pt(2) from two single adsorbed Pt atoms involves a rather small energy barrier of ~0.10 eV only. On the contrary, dissociation of adsorbed Pt(2) requires to overcome a considerable barrier of ~1.43 eV. This indicates that once Pt(2) is formed it will remain on the surface, thus likely triggering the growth of larger supported Pt particles.     

Radioiodination of 4-benzyl-1-(3-iodobenzylsulfonyl)piperidine, 4-(3-iodobenzyl)-1-(benzylsulfonyl)piperazine and their derivatives via isotopic and non-isotopic exchange reactions

A mild and simple technique for preparing of 4-benzyl-1-(3-[¹²⁵I]iodobenzylsulfonyl)piperidine, 4-(3-[¹²⁵I]iodobenzyl)-1-(benzylsulfonyl)piperazine and their derivatives, as sigma-1 receptor ligands, with relatively high radiochemical yields via nucleophilic substitution reaction by means of isotopic and non-isotopic exchange reactions is described. Some factors affecting the radiochemical yield were commonly studied in presence of acidic medium at elevated temperature. Unfortunately, the radiochemical yields were weak. Some attempts were carried out in presence of polar aprotic solvents to enhance the radiochemical yield. N,N-Dimethylformamide was proved highly efficient for preparing of radioiodinated 4-benzyl-1-(3-iodobenzylsulfonyl)piperidine (4-B-[¹²⁵I]-IBSP, 70 ± 5.7 %) and 4-(3-iodobenzyl)-1-(benzylsulfonyl)piperazine (4-[¹²⁵I]-IBBSPz, 72 ± 6.0 %) at moderate temperature (100–105 °C) within 8 h. The specific activities of 4-B-[¹²⁵I]-IBSP and 4-[¹²⁵I]-IBBSPz (6,534.2 and 5,927.4 MBq/mmol) were obtained respectively.     

Molecular structure,conformational stability,energetic and intramolecular hydrogen bonding in ground,and electronic excited state of 3-mercapto propeneselenal

In the present work, a conformational analysis of 3-mercapto propeneselenal is performed using several computational methods, including DFT (B3LYP), MP2, and G2MP2. At the DFT and G2MP2 levels the most stable conformers of title compound are characterized by an extended backbone structure, minimizing the steric repulsions between the sulfur and selenium lone pairs. Two conformers exhibit hydrogen bonding. This feature, although not being the dominant factor in energetic terms, appears to be of foremost importance to define the geometry of the molecule. The influence of the solvent on the stability order of conformers and the strength of intramolecular hydrogen bonding was considered using the PCM, SCI–PCM, and IEF–PCM methods. The results of analysis by quantum theory of “Atoms in Molecules” and natural bond orbital method fairly support the DFT results. The calculated HOMO and LUMO energies showed that charge transfer occurs within the molecule. Further verification of the obtained transition state structures was implemented via intrinsic reaction coordinate analysis. Calculations of the ¹H NMR chemical shift at GIAO/B3LYP/6–311++G** levels of theory are also presented. The excited-state properties of intramolecular hydrogen bonding in hydrogen-bonded systems have been investigated theoretically using the time-dependent density functional theory method.     

Direct NMR detection of the binding of functional ligands to the human sweet receptor, a heterodimeric family 3 GPCR

We present a robust method for monitoring the binding of ligands to the heterodimeric (T1R2+T1R3) human sweet receptor (a family 3 GPCR receptor). The approach utilizes saturation transfer difference (STD) NMR spectroscopy with receptor proteins expressed on the surface of human epithelial kidney cells. The preparation investigated by NMR can contain either live cells or membranes isolated from these cells containing the receptor. We have used this approach to confirm the noncompetitive binding of alitame and cyclamate to the receptor and to determine that greatly reduced receptor binding affinity compared to wild-type brazzein explains the lack of sweetness of brazzein mutant A16C17. This approach opens new avenues for research on the mechanism of action of the sweet receptor and for the design of new noncalorigenic sweeteners.     

An eco-friendly procedure for the efficient synthesis of dialkyl α-aminophosphonates in aqueous media

A new, convenient and high yielding procedure for the preparation of diethyl α-aminophosphonates in water by one-pot reaction of aldehydes, amines, tri/dialkyl phosphites in the presence of a low catalytic amount of [Cu(3,4-tmtppa)](MeSO₄)₄ (0.16 mol%) as a highly stable and re-usable catalyst is described.     

A study of starch addition on burst effect and diameter of polyurethane microspheres containing theophylline

Theophylline was encapsulated in polyurethane prepared with hexamethylene diisocyanate (HMDI), polycaprolactone (PCL) (M_W = 530 and 2000 g/mol) diols, and starch as polyols and butanediol as chain extender. Polyurethane microspheres were prepared in two reactors; after polyurethane preparation by mixing PCL/starch, HMDI and theophylline in the first reactor, microspheres formation was achieved by transferring the reaction mixture to an aqueous medium (moving at 5000 rpm) of the second reactor. Fourier transform infrared (FTIR) was employed to confirm polyurethane formation during the course of reactions. FTIR spectrum revealed bands at 1729–1733 cm^?1 and 3340–3347 cm^?1 which indicates carbonyl and NH of amine groups, respectively. Scanning electron microscopy (SEM) was used to study the morphology of the samples. SEM confirmed the formation of microspheres with spherical morphology. Particle size investigation with optical microscopy revealed a size distribution of 8–70 µm. Controlled release of theophylline from the microspheres was performed in phosphate buffered saline (PBS) at pH = 7.4 and monitored with a ultraviolet (UV) spectrometer at 274 nm. Drug release profiles showed that starch addition reduced the release rate around 24% for microspheres prepared from PCL with a molecular weight of 2000 g/mol and it had negligible effect on a molecular weight of 530 g/mol. Copyright © 2007 John Wiley & Sons, Ltd.     

Comparison between various Keggin and Wells–Dawson sandwich‐type polyoxometalates in catalytic oxidation of cyclooctene and cyclohexene with hydrogen peroxide

The catalytic performance of tetra‐n‐butylammonium salts of Keggin and Wells–Dawson sandwich‐type polyoxotungstates, [M₄(PW₉O₃₄)₂]^m? and [M₄(P₂W₁₅O₅₆)₂]^n? (M = Mn²⁺, Fe³⁺, Co²⁺, Ni²⁺, Zn²⁺), in the oxidation of cyclooctene and cyclohexene with 30% hydrogen peroxide under various conditions was investigated. In comparison, Wells–Dawson sandwich‐type polyoxometalates were found to be less active than Keggin ones. In both of them, those containing Zn and Fe gave higher conversions for different oxidation conditions. These catalysts showed very good reusability in the oxidation reaction. Copyright © 2014 John Wiley & Sons, Ltd.